Chuck,
When you cross the big water to go to your boat, what is your travel
time? I am assuming you are still living in New Jersey.
Ray
___
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the b
CnC-List"
To: cnc-list@cnc-list.com
Cc: "dwight"
Sent: Monday, July 20, 2015 12:49:01 PM
Subject: Re: Stus-List Raymarine Autohelm problem
Chuck
That's the same problem I have with my 4000 st+ unit...I think my problem is
with the control head...the motor works fin
st@cnc-list.com
Cc: "Jack Brennan"
Sent: Sunday, July 19, 2015 10:42:11 PM
Subject: Re: Stus-List Raymarine Autohelm problem
Here’s a link to the repair manual for the 4000+:
http://www.bristolsailboats.org/wp-content/uploads/2014/08/st40001.pdf
If the motor works, the problem is prob
Chuck
That's the same problem I have with my 4000 st+ unit...I think my problem
is with the control head...the motor works fine when I aplly 12 V source
but the controller sends no voltage to the motor...I found the service
manual for the unit here; http://www.ganssle.com/jack/st4000.pdf
and have c
chie, 1974 Bristol 30
Tierra Verde, Fl.
From: Chuck S via CnC-List
Sent: Sunday, July 19, 2015 10:11 PM
To: cnc-list-bounces cnc-list ; CNC boat owners, cnc-list
Cc: Chuck S
Subject: Stus-List Raymarine Autohelm problem
Seems my Raymarine 4000STPlus has a problem. It does not work. The displa
Seems my Raymarine 4000STPlus has a problem. It does not work. The display is
displaying and all buttons seem to work. Today it kept displaying XTE. I pulled
the motor connection and read a short pulse of volts at the socket when I tried
to change course through the controller. The motor surged
