I would worry WAY more about the below-the-waterline fittings than near deck level bilge pump fittings.
Joe Della Barba Coquina From: Josh Muckley via CnC-List <cnc-list@cnc-list.com> Sent: Monday, April 19, 2021 2:31 PM To: C&C List <cnc-list@cnc-list.com> Cc: Josh Muckley <muckl...@gmail.com> Subject: [EXTERNAL] Stus-List Pipe fittings for overboard discharge Hey folks, Without getting too deep into the details, I'm having a bit of difficulty finding fittings to plumb my new bilge pumpS overboard. I've envisioned a solution but it requires use of PVC and glued joints. This throws up some red flags in my mind but I'm not really sure why or if it is actually frowned upon. These fittings are not below the waterline and are not connected to anything below the waterline except the bilge pump. The hoses will have a high point to avoid the very unlikely possibility of a syphon. TBH it kinda comes down to whether or not an inspector/surveyor would immediately throw the flag if they saw a PVC fitting. As a funny side note the PO used grey PVC (conduit) elbow and a white PVC elbow (both NPT) on some of my through hulls. They have subsequently been trapped in place by other modifications which prevent unscrewing them so replacement means serious destruction. The purchase surveyor commented about them but didn't note it on the survey and subsequent surveyors have not mentioned them. Those are threaded AND below the waterline so it's a bit of a different story. Figured I'd get a feeling from the group so I can at least know why it's wrong. Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu