Pete,
My rudder is lying on the ground underneath our boat. I’ll be over there
tomorrow working on her and will take some photos for you. Although it’s been
so long since I dropped the rudder, I’m pretty sure that that nut is just for
the emergency steering gear. I have the same play in our boa
Pete
Yes you need to support the rudder. It’s just a delrin ring under it.
Joel
On Sun, Nov 22, 2020 at 4:46 PM Dave Godwin via CnC-List <
cnc-list@cnc-list.com> wrote:
> Pete,
>
> My rudder is lying on the ground underneath our boat. I’ll be over there
> tomorrow working on her and will take s
mp;C List
Cc: Dave Godwin
Subject: Stus-List Re: rudder post fitting
Pete,
My rudder is lying on the ground underneath our boat. I’ll be over there
tomorrow working on her and will take some photos for you. Although it’s been
so long since I dropped the rudder, I’m pretty sure that that nut is
C-List
Sent: Sunday, November 22, 2020 4:46 PM
To: C&C List
Cc: Dave Godwin
Subject: Stus-List Re: rudder post fitting
Pete,
My rudder is lying on the ground underneath our boat. I’ll be over there
tomorrow working on her and will take some photos for you. Although it’s been
so long since
: Monday, November 23, 2020 9:48 AM
To: 'Stus-List'
Subject: Stus-List Re: rudder post fitting
Pete:
Removal is either a multiple person job (supporting from below, yes) or
you will need to come up with a safe method. My rudder post is threaded on top
to accept an eyebolt, and a
David:
I'm guessing the rudder post is 3 inches or so in diameter. How on
earth did you drill out the bushings?
-Original Message-
From: David Risch
Sent: Monday, November 23, 2020 10:01 AM
To: Stus-List
Subject: Stus-List Re: rudder post fitting
Matt...my 1981 40
: November 23, 2020 11:06 AM
To: 'Stus-List'
Subject: Stus-List Re: rudder post fitting
David:
I'm guessing the rudder post is 3 inches or so in diameter. How on
earth did you drill out the bushings?
-Original Message-
From: David Risch
Sent: Monday, November 23
, November 23, 2020 10:06 AM
To: 'Stus-List'
Subject: Stus-List Re: rudder post fitting
David:
I'm guessing the rudder post is 3 inches or so in diameter. How on
earth did you drill out the bushings?
-Original Message-
From: David Risch
Sent: Monday, November 2
Monday, November 23, 2020 10:06 AM
> To: 'Stus-List'
> Subject: Stus-List Re: rudder post fitting
>
> David:
>
>I'm guessing the rudder post is 3 inches or so in diameter. How on earth
> did you drill out the bushings?
>
> -Original Message-----
> believe is allowed by a worn lower bushing, we're scratching our heads
> about how we might go about it.
>
> Thoughts?
>
> Matt
> C&C 42 Custom
>
> -Original Message-
> From: Dave Godwin via CnC-List
> Sent: Sunday, November 22
What kind of boat did you get?detail?
On Sun, Nov 22, 2020 at 4:45 PM Dave Godwin via CnC-List <
cnc-list@cnc-list.com> wrote:
> Pete,
>
> My rudder is lying on the ground underneath our boat. I’ll be over there
> tomorrow working on her and will take some photos for you. Although it’s
> been so l
11 matches
Mail list logo
