-list.com] On Behalf Of Charles
Nelson via CnC-List
Sent: Thursday, October 29, 2015 12:05 AM
To: cnc-list@cnc-list.com
Cc: Charles Nelson
Subject: Re: Stus-List Selden sprit kit install
So if one is club racing under PHRF with a racer-cruiser C 36 XL (non-planing
for sure!), does adding a sprit
Harry
That is the same boat
Mike
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Harry
Hallgring via CnC-List
Sent: Thursday, October 29, 2015 10:41 AM
To: cnc-list@cnc-list.com
Cc: Harry Hallgring
Subject: Re: Stus-List Selden sprit kit install
Mike,
Mass. Maritime had
To: CnClist
Cc: Dennis C.
Subject: Stus-List Selden sprit kit install
Installed a Selden sprit kit on a Peterson 37 today. Interesting piece of
equipment. Simple design but effective.
Essentially a big ring that mounts on the bow, a sprit pole that slides in/out
through the ring and a couple
sday, October 28, 2015 9:25 PM
To: CnClist
Cc: Dennis C.
Subject: Stus-List Selden sprit kit install
Installed a Selden sprit kit on a Peterson 37 today. Interesting piece of
equipment. Simple design but effective.
Essentially a big ring that mounts on the bow, a sprit pole that slides
*From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Harry
> Hallgring via CnC-List
> *Sent:* Thursday, October 29, 2015 10:41 AM
> *To:* cnc-list@cnc-list.com
> *Cc:* Harry Hallgring
> *Subject:* Re: Stus-List Selden sprit kit install
>
>
>
> Mike,
>
er 28, 2015 9:25 PM
> *To:* CnClist
> *Cc:* Dennis C.
> *Subject:* Stus-List Selden sprit kit install
>
>
>
> Installed a Selden sprit kit on a Peterson 37 today. Interesting piece of
> equipment. Simple design but effective.
>
> Essentially a big ring that moun
: Charles Nelson
Sent: Wednesday, October 28, 2015 11:05 PM
Subject: Re: Stus-List Selden sprit kit install
So if one is club racing under PHRF with a racer-cruiser C 36 XL
(non-planing for sure!), does adding a sprit and asymmetric kite improve its
performance relative to a mast head
Two years ago I purchased the Selden sprit at the Annapolis Boat Show. It sat
in my basement for the winter and in the spring I tried to install the sprit to
no avail. The problem was the anchor roller alignment and the bow cleats did
not allow the sprit to fit under the furling roller. I
power
and
won't do it.
Michael Brown
Windburn
C 30-1
Date: Thu, 29 Oct 2015 09:55:32 -0400
From: "Gary Nylander" <gnylan...@atlanticbb.net>
To: <cnc-list@cnc-list.com>
Subject: Re: Stus-List Selden sprit kit install
Message-ID: <4C50DDABD90142D5B2920192693C8243@GaryPC&g
>
> Chuck
> Chuck
> Resolute
> 1990 C 34R
> Broad Creek, Magothy River, Md
>
> From: "Pete Shelquist via CnC-List" <cnc-list@cnc-list.com>
> To: cnc-list@cnc-list.com
> Cc: "Pete Shelquist" <pete.shelqu...@comcast.net>
> Sent: Wed
, 2015 7:25 PM
To: CnClist
Cc: Dennis C.
Subject: Stus-List Selden sprit kit install
Installed a Selden sprit kit on a Peterson 37 today. Interesting piece of
equipment. Simple design but effective.
Essentially a big ring that mounts on the bow, a sprit pole that slides in/out
through
ist@cnc-list.com
Cc: "Pete Shelquist" <pete.shelqu...@comcast.net>
Sent: Wednesday, October 28, 2015 9:25:36 PM
Subject: Re: Stus-List Selden sprit kit install
Good write up Dennis –
I installed one and sailed with it in the 2014 season. I would add a couple
items t
Installed a Selden sprit kit on a Peterson 37 today. Interesting piece of
equipment. Simple design but effective.
Essentially a big ring that mounts on the bow, a sprit pole that slides
in/out through the ring and a couple folding padeyes that the rear fiiting
clips onto in the retracted or
13 matches
Mail list logo