Have sold my sailboats and am in the process of selling gear. I plan to put
everything on eBay but I have 2 Barlow 10” winch handles (bronze/chrome) that
were on my 1972 25’ C&C so I thought I would give the “listers” a shot at them
before I go the eBay route. I figure that a C&C sailor will giv
ad of St. Margaret's Bay, NS
_
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Hoyt,
Mike
Sent: June 21, 2013 9:30 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Winch Handles
the Titans have their uses. They are cheap, light and disposable. For
lower load
c-list@cnc-list.com
Subject: Re: Stus-List Winch Handles
Not sure if mine are the same brand - but bought from West - different
colors - but I have used this type for at least three years on my
35mkiii genoa primaries without breaking them
--
Jonathan
Indigo C&C 35III
SOUTHPORT CT
On Jun 21,
e:
> Are they sturdy enough to strap the genny in tight and not break?
> Ron
> Wild Cheri
> STL
>
>
> From: Bob Moriarty
> To: cnc-list@cnc-list.com
> Sent: Wednesday, June 19, 2013 4:58 PM
> Subject: Re: Stus-List Winch Handles
>
> I have one of these:
>
Are they sturdy enough to strap the genny in tight and not break?
Ron
Wild Cheri
STL
From: Bob Moriarty
To: cnc-list@cnc-list.com
Sent: Wednesday, June 19, 2013 4:58 PM
Subject: Re: Stus-List Winch Handles
I have one of these:
http://www.westmarine.com
.@sbcglobal.net; cnc-list@cnc-list.com
Subject: Re: Stus-List Winch Handles
WARNING!!!
This handle will not work in older shallow pocket Barlows! If you try to
use one in such winch, it might not come out.
I had correspondence with the inventor and discussed it with him at the
Annapo
I would throw over one of his old pieces of equipment then
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of
sam.c.sal...@gmail.com
Sent: Thursday, June 20, 2013 12:11 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Winch Handles
Nah
it gives you a taste how hard is to see a person overboard who can not wave
his/her arm...
Leslie (USCGA)
From: Jake Brodersen
To: cnc-list@cnc-list.com
Sent: Wednesday, June 19, 2013 4:26 PM
Subject: Re: Stus-List Winch Handles
Bob,
With all due
Well, I meant the Bronze, but now you have me thinking . . .
Bill Coleman
C&C 39 animated_favicon1
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of William
Hall
Sent: Thursday, June 20, 2013 9:58 AM
To: cnc-list
Subject: Re: Stus-List Winch Handles
The handle or
rsday, June 20, 2013 6:22 AMTo: cnc-list@cnc-list.comReply To: cnc-list@cnc-list.comSubject: Re: Stus-List Winch Handles
I would have thrown the trimmer overboard as well - unless he
was the one who bought the One Touch handle
From: CnC-List
[mailto:cnc-list-boun...@cnc-list.com] On Beha
>
To: cnc-list@cnc-list.com
Sent: Wednesday, June 19, 2013 10:35 PM
Subject: Re: Stus-List Winch Handles
Jake,
I didn't take in your point about the difficulty of spotting a floating
cushion, much less a winch handle. Nevertheless, floatation gives one a shot
at recovery.
Bob M
st-bounces@cnc-list.com_
(mailto:cnc-list-boun...@cnc-list.com) ] On Behalf Of _sam.c.salter@gmail.com_
(mailto:sam.c.sal...@gmail.com)
Sent: Wednesday, June 19, 2013 6:55 PM
To: CnC
Subject: Stus-List Winch Handles
I've got both the Titan and the One Touch.
My trimmer threw the origina
t-boun...@cnc-list.com] *On Behalf Of *
> sam.c.sal...@gmail.com
> *Sent:* Wednesday, June 19, 2013 6:55 PM
> *To:* CnC
> *Subject:* Stus-List Winch Handles
>
> ** **
>
> I've got both the Titan and the One Touch.
>
> ** **
>
> My trimmer threw the orig
ne 19, 2013 10:35 PM
Subject: Re: Stus-List Winch Handles
Jake,
I didn't take in your point about the difficulty of spotting a floating
cushion, much less a winch handle. Nevertheless, floatation gives one a shot at
recovery.
Bob M
Ox 33-1
Jax, FL
On Wed, Jun 19, 2013 at 9:
Too bad, it's probably worth 10 bucks in scrap!
Bill Coleman
C&C 39 animated_favicon1
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of
sam.c.sal...@gmail.com
Sent: Wednesday, June 19, 2013 6:55 PM
To: CnC
Subject: Stus-List Winch Handles
I've got both
I would have thrown the trimmer overboard as well - unless he was the
one who bought the One Touch handle
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of
sam.c.sal...@gmail.com
Sent: Wednesday, June 19, 2013 7:55 PM
To: CnC
Subject: Stus-List
] On Behalf Of Joel
Aronson
Sent: Wednesday, June 19, 2013 7:45 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Winch Handles
I also have one. Also hurts less when dropped on my foot but if it goes
overboard I'm not likely to go swimming to retrieve it.
Joel Aronson
On Jun 19, 2013,
Bob,
That was my point, I would have never have found the floating winch handle
in the roiling waters.
Jake
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bob
Moriarty
Sent: Wednesday, June 19, 2013 10:36 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Winch
t; *Hampton VA*
>>
>> * *
>>
>> [image: cid:image001.png@01CE3D06.5A990940]**
>>
>> ** **
>>
>> ** **
>>
>> ** **
>>
>> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Bob
>> Moriarty
&g
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Bob
> Moriarty
> *Sent:* Wednesday, June 19, 2013 5:59 PM
> *To:* cnc-list@cnc-list.com
> *Subject:* Re: Stus-List Winch Handles
>
> ** **
>
> I have one of these:
>
> ** *
, and couldn't find either one.
Steve
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com]On Behalf Of Jake Brodersen
Sent: Wednesday, June 19, 2013 7:27 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Winch Handles
Bob,
With all due respect, floating winch ha
overboard.
Jake
Jake Brodersen
C&C 35 Mk-III
Midnight Mistress
Hampton VA
cid:image001.png@01CE3D06.5A990940
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bob
Moriarty
Sent: Wednesday, June 19, 2013 5:59 PM
To: cnc-list@cnc-list.com
Subj
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of OldSteveH
Sent: Wednesday, June 19, 2013 12:49 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Winch Handles
Winch handles without locking cams should be labelled - "Caution, this
handle is headed for the bottom of the bay
I've got both the Titan and the One Touch.My trimmer threw the original Barient, metal winch handle overboard and refused to sail with me until I bought a proper winch handle. He prefers the One Touch!sam :-) 403-617-6280
___
This List is provided by th
I also have one. Also hurts less when dropped on my foot but if it goes
overboard I'm not likely to go swimming to retrieve it.
Joel Aronson
On Jun 19, 2013, at 5:59 PM, Bob Moriarty wrote:
I have one of these:
http://www.westmarine.com/webapp/wcs/stores/servlet/Product_11151_10001_11120_-1?
I have one of these:
http://www.westmarine.com/webapp/wcs/stores/servlet/Product_11151_10001_11120_-1?ci_src=14110944&ci_sku=11120&cid=sc_googlepla&device=c&network=g&matchtype=&gclid=COjloYyM8bcCFVIV7AodbB0AuA#.UcImoOfVCSo
It floats, it locks, it's red and it doesn't chip the gelcoat when droppe
WARNING!!!
This handle will not work in older shallow pocket Barlows! If you try to use
one in such winch, it might not come out.
I had correspondence with the inventor and discussed it with him at the
Annapolis boat show a few years ago.
Dennis C.
Sent from my iPhone
On Jun 19, 2013,
aft and handle stayed in the winch (not overboard) and
> I was able to make repairs after the race without donor parts.
>
> Martin
> Calypso
> 1970 C&C 43
> Seattle
>
> -Original Message-
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of OldSt
as able to make repairs after the race without donor parts.
Martin
Calypso
1970 C&C 43
Seattle
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of OldSteveH
Sent: Wednesday, June 19, 2013 9:49 AM
To: cnc-list@cnc-list.com
Subject: Stus-List Winch Han
Lewmar is licensed to make a metal version of this, which is very nice,
but the composite version is the bomb. It's lighter, better ergonomic
shape, and CHEAPER.
http://www.onetouchhandle.com/
Bill Bina
On 6/19/2013 12:49 PM, OldSteveH wrote:
Winch handles without locking cams should be la
Lewmar is licensed to make a metal version of this, which is very nice,
but the original composite version is the bomb.
Bill Bina
On 6/19/2013 12:49 PM, OldSteveH wrote:
Winch handles without locking cams should be labelled - "Caution, this
handle is headed for the bottom of the bay - It's o
Winch handles without locking cams should be labelled - "Caution, this
handle is headed for the bottom of the bay - It's only a matter of time".
Saturday it went into 400 ft of water. When a loop from a reef line plucked
it off the cabintop main winch and gracefully flipped it into the water was
a
32 matches
Mail list logo
