Thanks, Leslie
On Tue, 8/11/15, Josh Muckley via CnC-List cnc-list@cnc-list.com wrote:
Subject: Re: Stus-List Yanmar question
To: CC List cnc-list@cnc-list.com
Cc: Josh Muckley muckl...@gmail.com
Date: Tuesday, August 11, 2015, 11:28 AM
Yes
The kill cable broke on my 2GM20, at the engine end. The cause (I think) was
that as the arm moved the wire was flexing where it was clamped to the arm. My
question: should that clamp (square block of metal with a hole for the wire and
a screw to clamp) rotate in the arm. Mine does not. Can
Yes it should rotate. I think mine is held on with a cotter pin or a clip.
Josh Muckley
S/V Sea Hawk
1989 CC 37+
Solomons, MD
Yanmar 3HM35F
On Aug 11, 2015 2:25 PM, Leslie Paal via CnC-List cnc-list@cnc-list.com
wrote:
The kill cable broke on my 2GM20, at the engine end. The cause (I
think)
an fins.Ahh the finer moments in a
boater's life.Should of drank like a pirate yesterday instead of just talking
like one!
From: captain_j...@cox.net
To: cnc-list@cnc-list.com
Date: Wed, 19 Sep 2012 18:32:49 -0400
Subject: Re: Stus-List Yanmar question
Jim, I went with a very small Vernalift
Gravity ... its everywhere !
Tim
From: cnc-list-boun...@cnc-list.com
[mailto:cnc-list-boun...@cnc-list.com] On Behalf Of jim aridas
Sent: Thursday, September 20, 2012 11:02 AM
To: cnc-list
Subject: Re: Stus-List Yanmar question
Jake might take you up on this. First need
Jim,
You might check the exhaust hose carefully. A small break around the clamp
might give the same symptoms, and I bet it is a cheaper repair (if you can
crawl in there).
Joel
On Wed, Sep 19, 2012 at 9:08 AM, jim aridas jarid...@msn.com wrote:
Follow up to my loud hissing sounding exhaust.
The composite material works best and last much longer.
In a message dated 9/19/2012 9:11:57 A.M. Eastern Daylight Time,
joel.aron...@gmail.com writes:
Jim,
You might check the exhaust hose carefully. A small break around the
clamp might give the same symptoms, and I bet it is a
Joel,Wouldn't I see leakage(water) at the clamp? Hoses are dry. Are you
thinking its sucking in air?Jim
Date: Wed, 19 Sep 2012 09:11:53 -0400
From: joel.aron...@gmail.com
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Yanmar question
Jim,
You might check the exhaust hose carefully. A small
I see leakage(water) at the clamp? Hoses are dry. Are you
thinking its sucking in air?
Jim
--
Date: Wed, 19 Sep 2012 09:11:53 -0400
From: joel.aron...@gmail.com
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Yanmar question
Jim,
You might check the exhaust
Date: Wed, 19 Sep 2012 09:22:24 -0400
From: joel.aron...@gmail.com
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Yanmar question
If the break is on the top side of the hose exhaust could be leaking into the
bilge. If your hose is original you might want to replace it now while one end
is off
a thought,
Mike
VIRGINIA LEE CC 36 CB
Virginia Beach, VA
-Original Message-
From: jim aridas jarid...@msn.com
To: cnc-list cnc-list@cnc-list.com
Sent: Wed, Sep 19, 2012 9:14 am
Subject: Re: Stus-List Yanmar question
Joel,
Wouldn't I see leakage(water) at the clamp? Hoses are dry. Are you
...@deyoungmfg.com
Calypso
1971 CC 43
Seattle
From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On
Behalf Of jim aridas
Sent: Wednesday, September 19, 2012 6:08 AM
To: cnc-list
Subject: Re: Stus-List Yanmar question
Follow up to my loud
9:08 AM
To: cnc-list
Subject: Re: Stus-List Yanmar question
Follow up to my loud hissing sounding exhaust. Raw water system good, flow
at end of heat exchanger going into the mixing elbow strong. Looked inside
of mixing elbow, no blockage(aided by flexible fiber optic scope). I didn't
want
From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On
Behalf Of jim aridas
Sent: Wednesday, September 19, 2012 9:08 AM
To: cnc-list
Subject: Re: Stus-List Yanmar question
Follow up to my loud hissing sounding exhaust. Raw water system good, flow at
end of heat exchanger
, 2012 7:22 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Yanmar question
Jake, does it have that GMC diesel sound?
Rich Knowles
Indigo. LF38
Halifax
On 2012-09-19, at 19:32, Jake Brodersen captain_j...@cox.net wrote:
Jim,
I went with a very small Vernalift muffler
-list@cnc-list.com cnc-list@cnc-list.com
Sent: Wednesday, September 19, 2012 6:22 PM
Subject: Re: Stus-List Yanmar question
Jake, does it have that GMC diesel sound?
Rich Knowles
Indigo. LF38
Halifax
On 2012-09-19, at 19:32, Jake Brodersen captain_j...@cox.net wrote:
Jim,
I went
: Wednesday, September 19, 2012 5:47 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Yanmar question
Probably sounds more like a 1998 Honda Civic with a varoom varoom exhaust and a
loud stereo. :)
Arrgh!! And so ends National Talk Like A Pirate Day, September 19.
Dennis C.
Touche' 35-1
…
Martin
From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On
Behalf Of Dennis C.
Sent: Wednesday, September 19, 2012 5:47 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Yanmar question
Probably sounds more like a 1998 Honda Civic with a varoom varoom exhaust
FORE
From: f...@postaudio.net
Date: Tue, 11 Sep 2012 15:55:01 -0500
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Yanmar question
Probably came off one of those cruise ships with a practice tee on the stern...
Fred Street -- Minneapolis
S/V Oceanis (1979 CC Landfall 38) -- on the hard
CC27 MKIII
-Original Message-
From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com]On
Behalf Of jim aridas
Sent: Tuesday, September 11, 2012 3:31 PM
To: capt...@yahoo.com; cnc-list
Subject: Re: Stus-List Yanmar question
Humm, knew we would get at least one witty
:53 PM
Subject: Re: Stus-List Yanmar question
Earlier
someone recommended a thorough check for clogs in the system
first.
I would
second that advice.
Thought I had
an elbow or water injector problem once but it turned out to be a partial
sea water clog that was entirely confined to the hose
AM
To: cnc-list
Subject: Re: Stus-List Yanmar question
Engine question. Have a Yanmar 3GMF20. Noticed this weekend the exhaust
started sounding like its hissing or more air with the water. Last few
weeks it sounded a little different, but thought that since my slip changed
at the yacht club I
-list.com] On
Behalf Of David Blair
Sent: Monday, September 10, 2012 11:49 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Yanmar question
I had that sound when there was plugging with a ½ cup of assorted seaweed - it
lodged in the right angle connection before the strainer. Am planning
Jake wrote:
I always check the nipples first! snip
I'm a leg man myself.
Dennis C.
From: Jake Brodersen captain_j...@cox.net
To: cnc-list@cnc-list.com
Sent: Monday, September 10, 2012 7:06 PM
Subject: Re: Stus-List Yanmar question
Jim
24 matches
Mail list logo