Re: Yummy new CPU/GPU combo

Boo, the Glamo seems to kill everything :( On 6/6/08, The Rasterman Carsten Haitzler <[EMAIL PROTECTED]> wrote: > On Thu, 05 Jun 2008 13:04:27 -0700 Robert Taylor <[EMAIL PROTECTED]> > babbled: > > at vga.. forget mame and games - they will be doing fullscreen updates. at > vga... no chance (of an

Re: resolution preferences??

On Fri, 6 Jun 2008 00:02:14 -0400 "Steven Milburn" <[EMAIL PROTECTED]> babbled: > This question is probably just because I misunderstood something you said > before, but I'll ask anyway :) > > If it is acceptable to use QVGA, couldn't that basically be done without any > hardware changes? I beli

Re: GPS <--> AGPS

"An *A-GPS* receiver can address these problems in several ways, using an *Assistance Server*: - The Assistance Server can locate the phone roughly by what cell siteit is connected to on the cellular network

Re: GPS <--> AGPS

Am Fr 6. Juni 2008 schrieb Flyin_bbb8: > just wanted to add, Differential GPS is mainly for aircraft GPS systems to > get better guidance on the ILS (Instrument Landing System). > Aaaaha, I seen it being used for all sorts of archeology and buildings construction purposes. And from the info in

Re: resolution preferences??

This question is probably just because I misunderstood something you said before, but I'll ask anyway :) If it is acceptable to use QVGA, couldn't that basically be done without any hardware changes? I believe I remember you saying the glamo does scaling, so couldn't you let SW treat the display

Re: USA, East coast groupe order

Sounds like a good plan to me Paul Buede wrote: > Count me in. > > Feydreva wrote: >> It seems we will never have 10 people in VA, nor in Maryland, nor in >> New york. >> >> New york group is already 5. Why not all go in the NY group then ? >> >> I was thinking joining the NY group, and get som

Re: GPS <--> AGPS

just wanted to add, Differential GPS is mainly for aircraft GPS systems to get better guidance on the ILS (Instrument Landing System). ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community

Re: GPS <--> AGPS

actually i believe it does help in much better accuracy (unless if you're indoors) On Fri, Jun 6, 2008 at 3:11 AM, Lally Singh <[EMAIL PROTECTED]> wrote: > On Thu, Jun 5, 2008 at 7:25 PM, Joerg Reisenweber <[EMAIL PROTECTED]> > wrote: > > Am Do 5. Juni 2008 schrieb Lally Singh: > >> AFAIK, the A

Re: keyboard openmoko-qtopia-x11-image

On Thu, 5 Jun 2008 23:51:53 +0200 Michael <[EMAIL PROTECTED]> babbled: > hi all, > > i spent some times to search how can change the virtual keyboard > (openmoko-qtopia-x11-image) from letters to numerical classification. but i > dont find it :( > > is it possible to change? > how i can chang

Re: Illume / ASU on GTA01 - Video

On Thu, 5 Jun 2008 15:40:01 +0530 "Rahul Joshi" <[EMAIL PROTECTED]> babbled: > > Good job for the video and hey openmoko people, GOOD JOB for the ASU, > > it's really nice, quite slow on the neo 1973 but it can be optimized i > > think and the FreeRunner should be faster. > > don't be so sure ab

Re: Yummy new CPU/GPU combo

On Thu, 05 Jun 2008 13:04:27 -0700 Robert Taylor <[EMAIL PROTECTED]> babbled: at vga.. forget mame and games - they will be doing fullscreen updates. at vga... no chance (of any decent framerate). if you don't believe me... try it when you get one! :) at qvga though - maybe. also a lot of arcade

Re: Yummy new CPU/GPU combo

On Thu, 5 Jun 2008 12:56:00 +0200 Tom Cooksey <[EMAIL PROTECTED]> babbled: > Well... yeah, that's kindof the reason for the initial post! I must have > misunderstood previous posts as I was convinced the glamo was itself attached > to the CPU's SDIO interface. You can understand where I was coming

resolution preferences??

On Thu, 05 Jun 2008 11:50:43 +0200 Marc Bantle <[EMAIL PROTECTED]> babbled: > > quick question - would you prefer a qvga lcd (save a bit of cost) since we'e > > going to need to software-drive all graphics - the fewer pixels you have to > > fill, the better for speed. i'm really tossing up if the

Re: Yummy new CPU/GPU combo

On Thu, 5 Jun 2008 10:20:44 -0400 (EDT) Ken Young <[EMAIL PROTECTED]> babbled: > Carsten Haitzler (The Rasterman) wrote: > > > quick question - would you prefer a qvga lcd (save a bit of cost) > > since we'e going to need to software-drive all graphics - the fewer > > pixels you have to fill, the

Re: Hardware Block Diagram

Here is the detail spec of GTA02 http://wiki.openmoko.org/wiki/Neo_FreeRunner_GTA02_Hardware Dale Schumacher 提到: > > I've done several searches on the wiki and I can't seem to find any > block diagram of the Freerunner hardware. Is there any such thing? It > would sure help to clarify how all th

San Diego and LA group sales

Hi guys, Well, as some of you know I'm from México, and I'm not being very succesfull about making a group to buy a 10 pack. I'm sure some of my friends will buy a Freerunner when I show them what we can do with it, but right now I almost alone here. I was wondering if we could join LA, San Diego

Boulder Colorado group sale

Hello, If you're in the Boulder, Colorado area consider joining our group. We're up to five buyers. We may join forces with Tuscon, AZ. Please contact me or add your name to http://wiki.openmoko.org/wiki/GroupSales#Boulder. I can make the purchase and do local delivery. Vinc ___

Re: USB connectors on FreeRunner & Hostmode

Jeremiah Flerchinger wrote: > It's my understanding that the SC32442B in the FreeRunner has a host > controller that can support 2 peripherals (I found a link to the manual > today & updated in the wiki). Is there just the 1 external connector or > are there additional pins or connectors internal

Re: GTA03 case should incorporate stylus holder

As I have short, fat fingers stylii are are a neccessay evil - I find fingers on most smart phones a pain. The only evilness my stylii have is a propensity to hide when they are really needed! - they are so so much faster than my fingers on a treo650 for instance :) And trying to use the dialler

Re: USA, East coast groupe order

Count me in. Feydreva wrote: > It seems we will never have 10 people in VA, nor in Maryland, nor in > New york. > > New york group is already 5. Why not all go in the NY group then ? > > I was thinking joining the NY group, and get someone to send me the > phone in VA. > > Philippe > > > ---

Re: Yummy new CPU/GPU combo

Lally Singh wrote: > On Thu, Jun 5, 2008 at 7:04 PM, Flemming Richter Mikkelsen > <[EMAIL PROTECTED]> wrote: > >> On 6/5/08, Michael 'Mickey' Lauer <[EMAIL PROTECTED]> wrote: >> I agree with Michael. The only reason I want a Freerunner, is because >> it is open. >> > > Open's great. But Op

Re: GPS <--> AGPS

On Thu, Jun 5, 2008 at 7:25 PM, Joerg Reisenweber <[EMAIL PROTECTED]> wrote: > Am Do 5. Juni 2008 schrieb Lally Singh: >> AFAIK, the AGPS allows you to upload additional information into the >> onboard correlator (the CPU that does the actual location calculations >> for GPS) to enhance the accura

Re: GPS <--> AGPS

Am Do 5. Juni 2008 schrieb Lally Singh: > AFAIK, the AGPS allows you to upload additional information into the > onboard correlator (the CPU that does the actual location calculations > for GPS) to enhance the accuracy over what you get with simple > satellite triangulation. It's about reducing T

USB connectors on FreeRunner & Hostmode

It's my understanding that the SC32442B in the FreeRunner has a host controller that can support 2 peripherals (I found a link to the manual today & updated in the wiki). Is there just the 1 external connector or are there additional pins or connectors internal to the FreeRunner that can be easily

Re: Yummy new CPU/GPU combo

On Thu, Jun 5, 2008 at 7:04 PM, Flemming Richter Mikkelsen <[EMAIL PROTECTED]> wrote: > On 6/5/08, Michael 'Mickey' Lauer <[EMAIL PROTECTED]> wrote: > I agree with Michael. The only reason I want a Freerunner, is because > it is open. Open's great. But Open+Powerful would also be nice. I can't b

Re: GTA03 case should incorporate stylus holder

a stylus is a another thing to loose... I do NOT want to be Dependant on a stylus... On Thu, Jun 5, 2008 at 4:14 PM, Stroller <[EMAIL PROTECTED]> wrote: > > On 5 Jun 2008, at 18:46, Michael 'Mickey' Lauer wrote: > > On Thursday 05 June 2008 18:04:32 Stroller wrote: > >> On 5 Jun 2008, at 15:38, R

Re: USA, East coast groupe order

Hum.. I was just expecting one of the NY guy to send it by mail ... Even if the Week end in new york seems appealing :) On Thu, Jun 5, 2008 at 4:14 PM, Lally Singh <[EMAIL PROTECTED]> wrote: > On Thu, Jun 5, 2008 at 3:46 PM, Feydreva <[EMAIL PROTECTED]> wrote: > > It seems we will never have 10 p

Re: Yummy new CPU/GPU combo

On 6/5/08, Michael 'Mickey' Lauer <[EMAIL PROTECTED]> wrote: > On Thursday 05 June 2008 18:05:47 Mark wrote: > > Robert Schuster theBohemian at gmx.net wrote on Tue Jun 3 18:10:18 CEST > > 2008 > > > > >Hi. > > > > > >flexd schrieb: > > >> Carsten Haitzler (The Rasterman) skrev: > > >>> On Mon, 2 J

Re: GTA03 case should incorporate stylus holder

On Thursday 05 June 2008 23:14:41 Stroller wrote: > On 5 Jun 2008, at 18:46, Michael 'Mickey' Lauer wrote: > > On Thursday 05 June 2008 18:04:32 Stroller wrote: > >> On 5 Jun 2008, at 15:38, Ron K. Jeffries wrote: > >>> Can the revised case for GTA03 *please* be designed > >>> to hold a stylus? > >

Re: London Groupsales

Andy Selby wrote: > I was going to sign up with the London groupbuy, but nobody has > asserted themselves to be the main purchaser. > I'd be willing to do this, with suitable safeguards of course. However, I'm number 11 on the list of (currently) 14, so we'd have to work out who actually gets

Re: keyboard openmoko-qtopia-x11-image

Flick the screen up or down. On Jun 5, 2008, at 2:51 PM, Michael wrote: > hi all, > > i spent some times to search how can change the virtual keyboard > (openmoko-qtopia-x11-image) from letters to numerical > classification. but i > dont find it :( > > is it possible to change? > how i can chang

Re: GTA03 case should incorporate stylus holder

On Thu, Jun 5, 2008 at 5:14 PM, Stroller <[EMAIL PROTECTED]> wrote: >> That doesn't mean that we will not write all our apps finger- >> compatible (we >> also hate stylii), > > I think what you're saying there is that 1st-party apps will be > finger-compatible, but that "ported" applications are no

keyboard openmoko-qtopia-x11-image

hi all, i spent some times to search how can change the virtual keyboard (openmoko-qtopia-x11-image) from letters to numerical classification. but i dont find it :( is it possible to change? how i can change this? michael ___ Openmoko community mai

Re: GPS <--> AGPS

A quick look on google says that GPS is required for all cell phones (well, E911 requires that 911 calls from cell phones also get the coordinates, and operators didn't want to change all their towers, so they started requiring their phones to have GPS). Sadly, most phones don't allow application

Re: GSoC project status: Speech Recognition facility in open moko

So wouldn't it be a main problem if we change the main applications like the Dialer, the contacts etc? for example from GTK to Qtopia? other way round or anything else? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.open

Re: GTA03 case should incorporate stylus holder

On 5 Jun 2008, at 18:46, Michael 'Mickey' Lauer wrote: > On Thursday 05 June 2008 18:04:32 Stroller wrote: >> On 5 Jun 2008, at 15:38, Ron K. Jeffries wrote: >>> Can the revised case for GTA03 *please* be designed >>> to hold a stylus? >> >> Nooo! >> >> Stylii are EVIL! >> >> If I can't operat

Re: USA, East coast groupe order

On Thu, Jun 5, 2008 at 3:46 PM, Feydreva <[EMAIL PROTECTED]> wrote: > It seems we will never have 10 people in VA, nor in Maryland, nor in New > york. > > New york group is already 5. Why not all go in the NY group then ? > > I was thinking joining the NY group, and get someone to send me the phon

Re: Cleared to start Mass production

Thanks, thanks to you all coreteam, fanboys, critical ones, wanabees and geeks in general, and any other kind of entity thanks you all to make it posible. --- El jue, 5/6/08, steve <[EMAIL PROTECTED]> escribió: > De: steve <[EMAIL PROTECTED]> > Asunto: Cleared to start Mass production > Para:

Re: Cleared to start Mass production

So the sale will begin soon then? *Happy* Alexander Frøyseth steve skrev: The latest update I have from the factory indicates that mass Production ( that means running the SMT line without stopping to check stuff every two seconds) has been CLEARED TO START. -Original Message- Fro

Re: Cleared to start Mass production

Ilja O. ha scritto: > I can see death looking carefully at my piggy bank. > > Wonderful news and hey i'm worried about your piggy bank, please please don't kill it!!! :D Cya! Pietro ___ Openmoko community mailing list community@lists.openmoko.org ht

Re: Cleared to start Mass production

> The latest update I have from the factory indicates that mass > Production (that means running the SMT line without stopping to > check stuff every two seconds) has been CLEARED TO START. hmm...so where is GNU/Hurd? ... :D ___ Openmoko community ma

Re: Cleared to start Mass production

kazaam wrote: > Can someone here answer my question if at the moment v5 or v6 are produced? According to the past thread v5 vs v6, they should be led-fixed-v5 freerunners. Anyway... Well, finally the GREAT news I was waiting for! :P -- Treviño's World - Life and Linux http://www.3v1n0.net/ _

Re: Yummy new CPU/GPU combo

You know, you are jokingly commenting about this ... ... but i'm fully setting mine up as a mame emulator. I think that while initially moko is positioned for the technically experienced, I believe we have a device here that can trully do something unique - become a portable general computing a

Re: London Groupsales

I was going to sign up with the London groupbuy, but nobody has asserted themselves to be the main purchaser. HantsLUG's groupbuy is a more attractive prospect because it is organized through an existing LUG and includes notable people such as Andy Smith and Alan Pope so there's less chance of th

Re: y-cable in action

On Thu, Jun 5, 2008 at 12:37 PM, Brad Midgley <[EMAIL PROTECTED]> wrote: > I had to add the usbserial module too... iirc the ppp modules were > already installed. Just an FYI: make sure you have the AirPrime driver installed as well, as the standard USBSerial does not have large enough data buffe

Re: Cleared to start Mass production

Alle 17:12, giovedì 5 giugno 2008, steve ha scritto: >  The latest update I have from the factory indicates that mass Production ( > that means running the SMT line without stopping to check stuff every two > seconds) has been CLEARED TO START. So a switch is waiting only to be pushed on for make

USA, East coast groupe order

It seems we will never have 10 people in VA, nor in Maryland, nor in New york. New york group is already 5. Why not all go in the NY group then ? I was thinking joining the NY group, and get someone to send me the phone in VA. Philippe ___ Openmoko co

Re: Yummy new CPU/GPU combo

Somehow I just remember how nice Tie Fighter looked on my computer back in 1994 - or 1996? With a full fledged VGA resolution. And gouraud shading. Mhmmm. If wine happens to run on the om? :-D Ken Young schrieb: Carsten Haitzler (The Rasterman) wrote: quick question - would you prefer a q

London Groupsales

Hi there, I was just wandering if there is any plan for how to go about the group purchase for the London group (Half and half etc.) Speed is the most important thing for me, so if the logistics are going to mean that I don't get to play with my freerunner until mid August I might seriously consi

Re: Cleared to start Mass production

I'm soo happy tp read that!! Kosa - Un mundo mejor es posible - steve escribió: The latest update I have from the factory indicates that mass Production ( that means running the SMT line without stopping to check stuff every two seconds) has been CLEARED TO START. -Original

Re: y-cable in action

Guys > | I'm unable to test either of these with the verizon 3g/evdo usb > | adapter... I don't have access to it this week :( I did find one of these at the office... so it does work, woohoo. At least with the AA supply. I'll test the AAA battery hub setup too when I can. I had to plug in the v

Re: Cleared to start Mass production

I can see death looking carefully at my piggy bank. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community

Re: Cleared to start Mass production

Dan Leinir Turthra Jensen wrote: > This is roughly the best news since hmm... i'm not entirely sure, since > some > really good news ;) (insert political joke about the rumors of Hillary Clinton stepping down from the American presidential race on Friday...) (and before that starts a flame w

Re: Hardware Block Diagram

may be you're looking for something like this: http://wiki.openmoko.org/wiki/Image:SimpleComponentDiagram.jpg well it's quite simplified, but i just found that on the wiki.. On 6/5/08, Dale Schumacher <[EMAIL PROTECTED]> wrote: > I've done several searches on the wiki and I can't seem to find any

Re: Cleared to start Mass production

Very good news, finally another milestone is done ;o) Thank you Steve Am Donnerstag 05 Juni 2008 17:12:42 schrieb steve: > The latest update I have from the factory indicates that mass Production ( > that means running the SMT line without stopping to check stuff every two > seconds) has been CL

Congratulations! Re: Cleared to start Mass production

Way to go! Please send best regards to all who have made it possible so far :-)) Kind regards, Boudewijn --- steve <[EMAIL PROTECTED]> wrote: > The latest update I have from the factory indicates > that mass Production ( > that means running the SMT line without stopping to > check stuff eve

Re: Yummy new CPU/GPU combo

On Thursday 05 June 2008 18:05:47 Mark wrote: > Robert Schuster theBohemian at gmx.net wrote on Tue Jun 3 18:10:18 CEST > 2008 > > >Hi. > > > >flexd schrieb: > >> Carsten Haitzler (The Rasterman) skrev: > >>> On Mon, 2 Jun 2008 23:12:30 -0400 "Lally Singh" >>> gmail.com> babbled: > >>> > >>> the d

Re: GTA03 case should incorporate stylus holder

On Thursday 05 June 2008 18:04:32 Stroller wrote: > On 5 Jun 2008, at 15:38, Ron K. Jeffries wrote: > > Can the revised case for GTA03 *please* be designed > > to hold a stylus? > > Nooo! > > Stylii are EVIL! > > If I can't operate an app with my fingers, then there's no place for > that app on

Re: Cleared to start Mass production

Can someone here answer my question if at the moment v5 or v6 are produced? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community

RE: Cleared to start Mass production

That's the best news I've heard in months! Thanks Steve! -Dan Staley From: steve [EMAIL PROTECTED] Sent: Thursday, June 05, 2008 11:12 AM To: 'List for Openmoko community discussion' Subject: Cleared to start Mass production The latest update I have from

Re: Cleared to start Mass production

Excellent! Thanks for the update! On Thu, Jun 5, 2008 at 11:12 AM, steve <[EMAIL PROTECTED]> wrote: > The latest update I have from the factory indicates that mass Production ( > that means running the SMT line without stopping to check stuff every two > seconds) has been CLEARED TO START. > > >

Re: Cleared to start Mass production

Wow! I can't believe it;-) Thanks! Am Donnerstag, den 05.06.2008, 08:12 -0700 schrieb steve: > The latest update I have from the factory indicates that mass Production ( > that means running the SMT line without stopping to check stuff every two > seconds) has been CLEARED TO START. > > > >

Re: Cleared to start Mass production

Thursday 05 June 2008 steve wrote: > The latest update I have from the factory indicates that mass Production ( > that means running the SMT line without stopping to check stuff every two > seconds) has been CLEARED TO START. > This is roughly the best news since hmm... i'm not entirely sure, s

Re: Cleared to start Mass production #2

Hi, On Thursday, 5. June 2008, steve wrote: > The latest update I have from the factory indicates that mass Production ( > that means running the SMT line without stopping to check stuff every two > seconds) has been CLEARED TO START. Is this the mail I have been waiting for? :D Second try with

Re: GSoC project status: Speech Recognition facility in open moko

"saurabh gupta" <[EMAIL PROTECTED]> writes: > I am saurabh gupta, working on speech recognition facility in open > moko All fine and dandy, but are you also looking at sphinx? -- Esben Stien is [EMAIL PROTECTED] s a http://www. s tn m irc://irc.

Re: Cleared to start Mass production

Hi, On Thursday, 5. June 2008, steve wrote: > The latest update I have from the factory indicates that mass Production ( > that means running the SMT line without stopping to check stuff every two > seconds) has been CLEARED TO START. Is this the mail I have waited for? :D -- (GNU) PGP ID: 0x4

Re: Question about future devices (GTA03,04)

Am 05.06.2008 um 17:12 schrieb steve: > Ya, there are also ugly taxes on FM last time I looked. ( in EU) AFAIK 14 % import duties for "broadcast receivers". Therefore some companies split production between basic device + receiver module (china) and final assembly in europe. Then, the 14% ar

Re: Cleared to start Mass production

On Thu, Jun 5, 2008 at 11:12 AM, steve <[EMAIL PROTECTED]> wrote: > The latest update I have from the factory indicates that mass Production ( > that means running the SMT line without stopping to check stuff every two > seconds) has been CLEARED TO START. > Wonderful ! :) -- Antoine Reid ___

Re: Cleared to start Mass production

Yay at last! So when does your psuedorandom date generator say they will be ready for shipping :) Also, in a previous email you mentioned pickups, I assume this means we would be able to go Fremont, CA, and actually fetch a FreeRunner, or is it only for larger orders? Cheers, Federico On Thu, Ju

Re: GPS <--> AGPS

I'm sorry if this question is completely ignorant, but I am always seeking understanding, and my previous understanding is inconsistant with the discussion here. I had originally believed 2 things. First, that AGPS was required by law in all US cell phones (Possibly elsewhere). And second, I had

Re: Cleared to start Mass production

... and there was much rejoicing! steve wrote: > The latest update I have from the factory indicates that mass Production ( > that means running the SMT line without stopping to check stuff every two > seconds) has been CLEARED TO START. ___ Openmoko

Yummy new CPU/GPU combo

Robert Schuster theBohemian at gmx.net wrote on Tue Jun 3 18:10:18 CEST 2008 > >Hi. > >flexd schrieb: >> Carsten Haitzler (The Rasterman) skrev: >>> On Mon, 2 Jun 2008 23:12:30 -0400 "Lally Singh" >>> babbled: >>> >>> the day nvidia comes with open drivers for this... we can begin to take an >>>

Re: GTA03 case should incorporate stylus holder

On 5 Jun 2008, at 15:38, Ron K. Jeffries wrote: > Can the revised case for GTA03 *please* be designed > to hold a stylus? Nooo! Stylii are EVIL! If I can't operate an app with my fingers, then there's no place for that app on my mobile phone! vi FTW! Stroller. ___

Re: Cleared to start Mass production

On Thu, Jun 5, 2008 at 11:12 AM, steve <[EMAIL PROTECTED]> wrote: > The latest update I have from the factory indicates that mass Production ( > that means running the SMT line without stopping to check stuff every two > seconds) has been CLEARED TO START. > : ) -- Dylan Type faster. Use Dvo

Hardware Block Diagram

I've done several searches on the wiki and I can't seem to find any block diagram of the Freerunner hardware. Is there any such thing? It would sure help to clarify how all this stuff is connected. -- Forwarded message -- > From: Andy Green <[EMAIL PROTECTED]> > Date: Thu, 05 Ju

RE: Question about future devices (GTA03,04)

Ya, there are also ugly taxes on FM last time I looked. ( in EU) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joachim Steiger Sent: Tuesday, June 03, 2008 9:31 AM To: List for Openmoko community discussion Cc: Joerg Reisenweber Subject: Re: Question

Cleared to start Mass production

The latest update I have from the factory indicates that mass Production ( that means running the SMT line without stopping to check stuff every two seconds) has been CLEARED TO START. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dennis Wollershei

Re: QVGA V/s VGA for GTA03 (was something about yummy CPU-GPU combos!)

On Thu, Jun 5, 2008 at 8:32 AM, rakshat hooja <[EMAIL PROTECTED]> wrote: > >> quick question - would you prefer a qvga lcd (save a bit of cost) since >>> we'e >>> going to need to software-drive all graphics - the fewer pixels you have >>> to >>> fill, the better for speed. i'm really tossing up

Yummy new CPU/GPU combo

Carsten Haitzler (The Rasterman) wrote: > quick question - would you prefer a qvga lcd (save a bit of cost) > since we'e going to need to software-drive all graphics - the fewer > pixels you have to fill, the better for speed. i'm really tossing up if > the speed of qvga is worth the loss of resol

Re: QVGA V/s VGA for GTA03 (was something about yummy CPU-GPU combos!)

On Thursday 05 June 2008 14:32:14 rakshat hooja wrote: > The N95 is also good when you look at it on its own and one has no problems > reading anything but when kept next to the Neo 1973 and Sharp 903 one can > tell the display is not in the same league. (the Sharp is also visible in > the sun tho

GTA03 case should incorporate stylus holder

Can the revised case for GTA03 *please* be designed to hold a stylus? The Palm Treo 700p and similar provide good examples re the stylus design and receptacle. -- Ron K. Jeffries http://www.retaggr.com/Card/RonKJeffries ___ Openmoko community mailing l

Re: OT: ajax image galleries

On Thursday 05 June 2008 09:31, Joseph Reeves wrote: > Yes, you're right, any site can redirect to anywhere else, but if that > happens and I end up somewhere I don't want to be, I can blacklist > both the original site and the target. I admit that this may be an > exercise in futility, but at leas

GPS <--> AGPS

** Matt said: http://people.openmoko.org/matt_hsu/ImplementationAssistNowServerAndClient(GPS.G4-SW-05017-C).pdf Cheers, Matt *** Scratch my previous question, I realise now that it was a stupid one :) ___

GPS <--> AGPS

** Matt said: http://people.openmoko.org/matt_hsu/ImplementationAssistNowServerAndClient(GPS.G4-SW-05017-C).pdf Cheers, Matt *** I get the impression there is only informtion to have AGPS working with an internet connection. I was unde

Re: Yummy new CPU/GPU combo

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Somebody in the thread at some point said: | On Thursday 05 June 2008 10:29:36 Andy Green wrote: |> The Glamo offers normal async memory bus interface which we use, but it |> has a bunch of timing constraints. (There is a synchronous burst bus |> mode

QVGA V/s VGA for GTA03 (was something about yummy CPU-GPU combos!)

> > > quick question - would you prefer a qvga lcd (save a bit of cost) since >> we'e >> going to need to software-drive all graphics - the fewer pixels you have >> to >> fill, the better for speed. i'm really tossing up if the speed of qvga is >> worth >> the loss of resolution. i'm just not sure

Re: GPS <--> AGPS

Brad Midgley wrote: > Yorick > > >> Maybe I missed somehting, but to my knowlegde the AGPS is not yet working on >> the Freerunner. >> Is there any work being done to get AGPS working? Does anybody have an idea >> if it will ever be implemented or not? And if it will be implemented, when >> will

Swiss Group-Order

Some time back (March or so) I had offered to organize a Freerunner group order for Switzerland. At the time, most people were expecting a late April/early May shipping date which would have fit my schedule pretty well. But as we all know, that date slipped; right now it looks like late June co

Re: Yummy new CPU/GPU combo

On Thursday 05 June 2008 10:29:36 Andy Green wrote: > The Glamo offers normal async memory bus interface which we use, but it > has a bunch of timing constraints. (There is a synchronous burst bus > mode that we don't use because the CPU doesn't support it and adding a > CPLD in there to translate

Re: Yummy new CPU/GPU combo

On Thursday 05 June 2008 11:29:10 Carsten Haitzler wrote: > On Thu, 5 Jun 2008 09:33:58 +0200 Tom Cooksey <[EMAIL PROTECTED]> > babbled: > > > On Wednesday 04 June 2008 21:56:56 Andy Green wrote: > > > | IMO, OpenMoko's choice of using the the glamo was a big mistake > > > (Connecting it to a > >

Re: Illume / ASU on GTA01 - Video

> Good job for the video and hey openmoko people, GOOD JOB for the ASU, > it's really nice, quite slow on the neo 1973 but it can be optimized i > think and the FreeRunner should be faster. don't be so sure about that! :) Any reason why you have doubts? To a common person, the performance b/w 19

Re: Yummy new CPU/GPU combo

Carsten Haitzler (The Rasterman) wrote: > On Wed, 4 Jun 2008 19:59:35 +0200 Tom Cooksey <[EMAIL PROTECTED]> > babbled: > > >> On Tuesday 03 June 2008 09:06:35 Carsten Haitzler wrote: >> >>> the day nvidia comes with open drivers for this... we can begin to take an >>> interest :) >>>

Re: Yummy new CPU/GPU combo

On Thu, 5 Jun 2008 09:33:58 +0200 Tom Cooksey <[EMAIL PROTECTED]> babbled: > On Wednesday 04 June 2008 21:56:56 Andy Green wrote: > > | IMO, OpenMoko's choice of using the the glamo was a big mistake > > (Connecting it to a > > | shared, 4-bit bus was probably the _biggest_ mistake). > > > > Huh

Re: Yummy new CPU/GPU combo

On Thu, 05 Jun 2008 15:57:12 +1000 Lorn Potter <[EMAIL PROTECTED]> babbled: > Carsten Haitzler (The Rasterman) wrote: > > On Wed, 04 Jun 2008 04:26:25 +0200 "Marco Trevisan (Treviño)" > > <[EMAIL PROTECTED]> babbled: > > > >> Carsten Haitzler (The Rasterman) wrote: > > And they use WINE to ru

Re: Illume / ASU on GTA01 - Video

On Thu, 05 Jun 2008 07:35:23 +0200 "Pietro \"m0nt0\" Montorfano" <[EMAIL PROTECTED]> babbled: > thomasg ha scritto: > > Hi list, > > > > there are still many people who don't know about ASU, and about the > > change in the Openmoko distribution - and there are not many videos, too. > > So I deci

Re: OT: TinyURL

I'm sorry, but this is a pretty ridiculous argument: Company A releases a largely redundant service that does little more than expose its users to a potential attack vector. In return, Company A releases a second service to try improve the security of its first. Why bother with either? My email c

Re: OT: ajax image galleries

Yes, you're right, any site can redirect to anywhere else, but if that happens and I end up somewhere I don't want to be, I can blacklist both the original site and the target. I admit that this may be an exercise in futility, but at least it's possible. My personal mail client, and the one I use

Re: Yummy new CPU/GPU combo

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Somebody in the thread at some point said: | On Wednesday 04 June 2008 21:56:56 Andy Green wrote: |> | IMO, OpenMoko's choice of using the the glamo was a big mistake |> (Connecting it to a |> | shared, 4-bit bus was probably the _biggest_ mistake). |>

Re: Illume / ASU on GTA01 - Video

Kalle Happonen wrote: > thomasg wrote: > >> Hi list, >> >> there are still many people who don't know about ASU, and about the >> change in the Openmoko distribution - and there are not many videos, too. >> So I decided to do a small video to show what it looks like, what it >> behaves like an

Re: duplicate mail

On Jun 4, 2008, at 10:14 PM, Philippe Guillebert wrote: > Hi list, > > Am I the only one to get some of the e-mails on this list twice ou > more > ? looks like the issue is back ... I get duplicates for every mail I receive (not only for openmoko list) and it started yesterday ;) Strange, but

  1   2   >