2010-10...@20:44 Benjamin Deering
> Has anyone done this replacement before? any gotchas?
no, but I think it's not too difficult if you have a little experience with DIY.
I've this (known) problem too but I'm afraid if I replace the battery it'll die
as the old one... not sure... but I think I c
Hi,
Both of my Freerunners lose the time when the battery is removed for
even a couple seconds. I am assuming this is due to worn out backup
batteries. I have ordered replacements (they were marked HB414 and they
were 2.40 each from digikey). I also got a better soldering iron for
doing the
giacomo mariani wrote:
> But, yes there is a but, I can't ssh to the mobile.
> Looking, in qterminal, at the output of ifconfig everything looks as usual,
> but demsg givs some strange error when the USB cable is attached: g_ether
> gadget: full speed config #2: RNDIS
> is followed by a groing (ma
On 23/10/2010, at 9:40 AM, Al Johnson wrote:
> high quality design doesn't have to be expensive to manufacture. I suspect
> something attractive could be made in low volume at a reasonable price using
> laser cut plastics. I'll try to ask the local cutters about their precision
> and cut thickn
Am 23.10.2010 um 15:40 schrieb Al Johnson:
> On Friday 22 October 2010, Dr. H. Nikolaus Schaller wrote:
>> Am 22.10.2010 um 02:17 schrieb Al Johnson:
>>> On Friday 22 October 2010, EdorFaus wrote:
On 10/21/2010 07:59 PM, Alfa21 wrote:
> you should try 3d print like this:
On Saturday 23 October 2010, giacomo mariani wrote:
> Hello everyone,
> I'm willin if such a component exists and is suitable for our mobile...
>
> Does some of you have any experience, hint or idea?
There doesn't seem to be a shortage of suitable chips. The problem will be
integrating it in
On Friday 22 October 2010, Dr. H. Nikolaus Schaller wrote:
> Am 22.10.2010 um 02:17 schrieb Al Johnson:
> > On Friday 22 October 2010, EdorFaus wrote:
> >> On 10/21/2010 07:59 PM, Alfa21 wrote:
> >>> you should try 3d print like this:
> >>
> >>
> >>> made in ABS which is a good plastic and up to
Hello everyone,
I'm willin if such a component exists and is suitable for our mobile...
Does some of you have any experience, hint or idea?
Giacomo
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/
Am 22.10.2010 um 19:17 schrieb Gennady Kupava:
> В Птн, 22/10/2010 в 05:36 -0700, RANJAN пишет:
>> Hello,
>>
>> Recommendations for better hardware on Openmoko.
>>
>> 1)A 600 Mhz processor is minimally required to run the OS at usable
>> speeds.An 800 Mhz processor would be good across all OSes
9 matches
Mail list logo