Re: QI kernel parameters

2011-01-03 Thread Phil Vandry
On Sun, 02 Jan 2011 21:26:08 +0100 Ed Kapitein e...@kapitein.org wrote: Anyway, i tried it, and i end up with: neo qi # make mkdir -p image ld: cannot open linker script file src/cpu//qi.lds: No such file or directory Sorry, I didn't (re-)read the instructions in the README file before

QI kernel parameters

2011-01-02 Thread Ed Kapitein
Hi all, I have a hard time with an SD card that will give errors whne running fsck, even right after an fresh mke2fs. So i am trying to slowdown the glamo, but that does not seem to work with QI acording to [1] i should work for nand in the same way as it does for sd card partitions. But that

Re: QI kernel parameters

2011-01-02 Thread Phil Vandry
On Sun, Jan 02, 2011 at 05:43:36PM +0100, Ed Kapitein wrote: I have a hard time with an SD card that will give errors whne running fsck, even right after an fresh mke2fs. I have one of those too :-( The problem follows the μSD card, not the Freerunner. Any other idea on how to supply kernel

Re: QI kernel parameters

2011-01-02 Thread Gennady Kupava
Hi, Notice, that if your distro-specific qi already has some kernel params changed in source or have some additional patches, you have to use distro-specific qi source as base. You may attempt to cat /proc/cmdline to check that. Alternatively just use u-boot ;) Gennady В Вск, 02/01/2011 в

Re: QI kernel parameters

2011-01-02 Thread Ed Kapitein
Hi Phil, Thanks for the tip, it seems like a hassle to recompile qi for setting the glamo clock speed. Anyway, i tried it, and i end up with: neo qi # make mkdir -p image ld: cannot open linker script file src/cpu//qi.lds: No such file or directory make: ***