It is quite hard to find a windows developer here arround...
Probably not the best place to mention it, but I'm a windows programmer
;) (Delphi)
Working on switching to Linux tho (which *is* why I'm here!) :) (Kylix).
Anything I can do, just shout.
Andy
On Sun, 2002-08-11 at 22:16, Andy Neillans wrote:
question about a box with no PCI
Contact Shuttle (http://www.shuttleonline.com/) and they
should be able
to sort you out I would hope, model number is SS40.
Eh? I was under the impression that the Shuttle miniature systems
featured
Possible solution:
http://islay.dyndns.org/taz/index.html
Worked with linux pci=bios,biosirq noauto but I had to modify lilo to
make sure it booted up after install happily.
Couple of bugs:
1. No poweroff - Motherboard is a SiS740/961
(Details on motherboard:
http://www.shuttleonline.com/spec.php3?model=ss40)
2. Xfdrake scrambled the XF86Config-4 -
Worked with linux pci=bios,biosirq noauto but I had to
modify lilo to
make sure it booted up after install happily.
ok, DrakX will now take care of this.
Excellent :)
2. Xfdrake scrambled the XF86Config-4 - it missed the Screen section
out.
did you used Cancel once during X
2. Xfdrake scrambled the XF86Config-4 - it missed the
Screen section
out.
did you used Cancel once during X configuration? ie. did
you get the
menu proposing Card, Monitor, ... ??
The wizard completed perfectly normally, said it was complete.
When I tried to startx
so where do you want it to find an old file? before formatting?
Well, if an XF86Config-4 exists when XFDrak goes to save the settings,
then it would be nice if the existing file was renamed to
XF86Config-4.XFDrak.old or something along those lines, just in case you
change your mind about the
Andy Neillans [EMAIL PROTECTED] writes:
First, thanks for replying :)
CD-ROM Install freezes on Hard Disk Drive setup step.
- can you test booting with linux noauto ?
Installer gets further, cancelled it to get a new set of images.
(Haven't bothered to burn all the images
I have a machine that has a RTL8139 network card
integrated into it.
cat /proc/pci under mandrake 8.1 shows it on IRQ11.
When I boot off the network.img, and try to load the
RTL8139 module
(8139too), I get insmod failed.
More Info:
After the failed insmod,
CD-ROM Install freezes on Hard Disk Drive setup step.
bug report attached.
Andy
report.bug
Description: Binary data
I have a machine that has a RTL8139 network card
integrated into it.
cat /proc/pci under mandrake 8.1 shows it on IRQ11.
When I boot off the network.img, and try to load the
RTL8139 module
(8139too), I get insmod failed.
More Info:
After the
Previously attached file was truncated.
Andy
[root@shuttle proc]# cat pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: PCI device 1039:0740 (Silicon Integrated Systems [SiS]) (rev 1)
Master Capable. Latency=32.
Non-prefetchable 32 bit memory at 0xe800
Webmin still says Mandrake 8.2 along the top.
Andy
1. The network.img reports that it's for 8.2 and exits
abnormally after you
tell it the IP addresses or tell it to use DHCP. Using 3c59x.
Hey, that's three of us having this problem now! Come on, we gotta be
able to figure out some kind of common feature between us...
--
adamw
Guillaume Cottenceau [EMAIL PROTECTED] writes:
what is your network card? (lspcidrake -v)
Sorry, I didn't read your other mail at that time.
By the way, I'm beginning to ask myself if we're not trapped in a
gcc-3.2 miscompilation since the whole network code of stage1 has
not
If I've been following the discussion successfully,
people are having problems with network.img?
I'm using it quite successfully with newest Cooker
with both 8139too and 3c905C-TX network cards.
You follow it right - can I ask a silly question - which mirror / site
did you use to get
If I've been following the discussion successfully,
people are having problems with network.img?
I'm using it quite successfully with newest Cooker
with both 8139too and 3c905C-TX network cards.
Me too, I have done a network installation with a 3com 509 without
problems.
Strange :(
Well, I now have the ISO burnt, but now I get:
I can't acess a Mandrake Linux Installation disc in your CDROM drive
(Drive here). Retry?
|Yes| |No| |Back|
Console:
Mounting /dev/hdc on /tmp/image as type iso9660
have to insmod isofs
succeeded isofs
Mount
Well, I now have the ISO burnt, but now I get:
I can't acess a Mandrake Linux Installation disc in your
CDROM drive
(Drive here). Retry?
|Yes| |No| |Back|
Console:
Mounting /dev/hdc on /tmp/image as type iso9660
have to insmod isofs
succeeded isofs
Installing with network.img
You didn't precise which network install you chose. Assuming NFS.
Tried HTTP, NFS and FTP. All same error.
Network adapter was autodetected correctly.
Specified DHCP
Supplied host and domain name.
Install Exited Abnormally
Received Signal
Installing with network.img
Network adapter was autodetected correctly.
Specified DHCP
Supplied host and domain name.
Install Exited Abnormally
Received Signal 11
Sending Termination Signals
looking at the console results, the dhcp was performed, and an ip
obtained.
Last line was:
configuring
Well, I now have the ISO burnt, but now I get:
I can't acess a Mandrake Linux Installation disc in your CDROM drive
(Drive here). Retry?
|Yes| |No| |Back|
Console:
Mounting /dev/hdc on /tmp/image as type iso9660
have to insmod isofs
succeeded isofs
Mount failed: Device or resource
busy
Andy
(Might appear twice - problems with internal mail server)
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of Andy Neillans
Sent: 29 July 2002 20:18
To: [EMAIL PROTECTED]
Subject: [Cooker] Install Exited Abnormally
Installing
Fix for this error in case anyone else gets it.
Line 9
File: ./misc/perl5/vendor_perl/5.8.0/i386-linux/URPM.pm
Read
$VERSION = '0.10';
Should read
$VERSION = '0.50';
Andy
Also getting the same errors on Mdk 8.2.
Hints appreciated.
Will do - just got to move the files back onto
Andy Neillans [EMAIL PROTECTED] writes:
The MakeCD command I am using is
/home/andy/mandrake/misc/MakeCD -t /home/andy/ -a
/home/andy/mandrake/
When it completes, my /home/andy/iso/Cooker directory is
empty, and I
have many REJECTED lines from the script (see my last e-mail
I get the following at the end of my MakeCD (./MakeCD -t /home/andy/ -a
/home/andy/mandrake/) run
MISSING_DEPENDENCIES libxerces-c1.5-1.5.2-1mdk.i586
libstdc++-libc6.2-2.so.3
REJECTED Bastille-1.3.0-2mdk.noarch
REJECTED nss_wins-2.2.5-13mdk.i586
REJECTED locales-bn-2.3.1.3-3mdk.i586
Randy Welch [EMAIL PROTECTED] writes:
Error: unexptected line in /proc/scsi/scsi
can you send me your /proc/scsi/scsi
as for not having any floppy disk, you may be able to do same as
bug: it only copies /tmp/ddebug.log on the floppy, you may achieve
the same with a ide drive
try booting installation with linux noauto
Now got a slightly different error, but it makes more sense!
in second stage install
unable to open /proc/bus/pci/devices
You may have passed a wrong argument to the -p option.
fopen() sets errno to: No such file or directory
install exited abnormally
28 matches
Mail list logo
