in a separated package).
Bye.
Giuseppe.
I'm also waiting to hear if this works on a Radeon 7200/Unreal
Tournament or other
hardware-accelerated stuff...(I really miss my UT, and I don't run
windows)
cheers all,
JJ
(ve1jot.ampr.org)
contributing to cooker, but for quite awhile now I cannot due to
hard-lock
of computer with kde (X maybe?).
Cheers,
JJ
with an Athlon XP 1700+
Shift
Same here, Radeon 7200 and Athlon 900, 512m ram, requires hard reset
even
with mem=nopentium or without..
I do get a small blue line at top, black screen with big X in the
middle,
but doesn't move with mouse, and can't dislodge it unless hard reboot..
Regards,
JJ
Chuck Shirley wrote:
Is anyone able to run the latest versions of XFree86 with DRM/DRI
on a system with an ATI Radeon display adaptor? When attempting
to do so, I experience a system re-boot. In order to load the
agpgart module, I have to pass the agp_try_unsupported=1 parameter,
but this
for Radeon 8500 DRM? Will I have
to buy new video hardware to keep up with cooker? Excuse my ignorance,
but exactly why has this support been excluded?
Cheers,
JJ
serviceshttp://www.ulyssis.org
This message will self-destruct when raped by leprechauns...
Could you also send me a copy?
Thanks,
JJ
[EMAIL PROTECTED]
SB!live platinum 5.1
to select to
install...then errors out with a packages already installed message,
I've done the rpm --rebuilddb -vv and it didn't help, so now I'm kinda
stuck dead in the water, any suggestions?
cheers,
JJ
gabor wrote:
the same here...
i don't know what's the problem, but this is what i did:
i urpmi.removemedia -ed everything,
then added back the cooker-mirror i'm using..
it's a bit brutal :-), but now it works correctly...
bye,
gabor
On Thu, 2002-06-06 at 17:50, JJ wrote
the ldconf already installed error but will allow you to
continue and install the other pkgs.
Charles
Yes, that works, thank you Charles..
cheers,
JJ
Hello cooker, I have an APC Smart-UPS 1400 here, and
no-where can I find the pin-outs wiring for the db9 connector,
so in order to use the apcupsd prog., I need to build a cable
and was wondering if anyone could point me in the right direction
so I could try this program?
Cheers,
John
JJ wrote:
Hello cooker, I have an APC Smart-UPS 1400 here, and
no-where can I find the pin-outs wiring for the db9 connector,
so in order to use the apcupsd prog., I need to build a cable
and was wondering if anyone could point me in the right direction
so I could try this program
Ron Stodden wrote:
Borsenkow Andrej wrote:
If you have several media defined you can use
urpmi --media media1,media2,...
to force install from specific sites only.
Oh dear, we are supposed to be speaking English here. Above
obviously should be:
If you have several media
SI Reasoning wrote:
I have a sneaking suspicion that /etc/rc.d/rc.local is
not being run during boot. I have a line at the end
that does not work until I run rc.local manually.
=
SI Reasoning
[EMAIL PROTECTED]
A requirement of creativity is that it contributes to change.
huug wrote:
Garrick Staples [EMAIL PROTECTED] writes:
Seems that libtcl.so disappeared this morning?
[root@polop root]# urpmi BitchX
installing
/usr/local/garrick/mandrake/Mandrake-devel/cooker/i586/Mandrake/RPMS/BitchX-1.0-0.c17.11mdk.i586.rpm
error: failed dependencies:
Warly wrote:
Stefan Siegel [EMAIL PROTECTED] writes:
Es schrieb Warly:
does this fixed the pb ? (for urpmi not rpmdrake gtk pb)
on urpm.pm
--- urpm.pm.warly Sat Feb 16 19:57:51 2002
+++ urpm.pm Sat Feb 16 19:57:21 2002
@@ -1139,7 +1139,7 @@
#- remove any
Charles A Edwards wrote:
With the listed rpms installed when I ran rpmdrake this morning I got the following
error:
keeping only files referenced in provides
built hdlist synthesis file for medium ftp.join.uni-muenster.de
found 0 headers in cache
removing 0 obsolete headers in cache
Buchan Milne wrote:
Dave Seff wrote:
On Thursday 07 February 2002 06:28, you wrote:
Dave Seff ([EMAIL PROTECTED]) wrote:
How can I tell if my network card is set to 10 or 100 or 100FD?
Sorry this is a support question.
[john@u100n41 john]$ dmesg | grep eth
eth0: OEM i82557/i82558
Thierry Vignaud wrote:
[EMAIL PROTECTED] (Robert Fox) writes:
You're right that I created the problem (whilst trying to solve the
mystery of the libGLcore issue) - MY FAULT.
What would have been nice, if you shared with the world that the kwintv
build from Cooker works with a stock
Jeremy Salch wrote:
try going into /lib/dev-state and deleting everything and then reboot
I did that on my system and it made it start working
On Monday 04 February 2002 03:34 pm, you wrote:
When starting up KDE i get the following error.
Borsenkow Andrej wrote:
%changelog
* Mon Feb 4 2002 Frederic Lepied [EMAIL PROTECTED] 2.2.0-21mdk
- renamed nobody group as nogroup
kdebase warning: group nobody does not exist - using
root
##
I do not like this
Thierry Vignaud wrote:
Olivier Thauvin [EMAIL PROTECTED] writes:
I have a tuner-tv on my computer, I have test yesterday xawtv with
xfree 4.2 and it not freeze my screen and keyboard as 4.1. This is a
good thinks.
I remember that kwintv working better than xawtv
since yesterday,
Thierry Vignaud wrote:
JJ [EMAIL PROTECTED] writes:
now, kde programmers have became the new maintainers of this piece of
sh$t and it seems they've enhance the whole stuff a lot.
i may consider repackaging it and restest it one day.
no such module v41
please try add 'Load v4l
Stefan Siegel wrote:
Am 2002-02-05, um 16:57:35 (-0400) schrieb JJ:
no such module v41
v4l = Video 4 Linux
- - -
Hope this helps
--
_
Tschüss und bis demnächst/à bientôt
J.A. Magallon wrote:
On 20020205 JJ wrote:
Thierry Vignaud wrote:
JJ [EMAIL PROTECTED] writes:
now, kde programmers have became the new maintainers of this piece of
sh$t and it seems they've enhance the whole stuff a lot.
i may consider repackaging it and restest it one day
SI Reasoning wrote:
I have burned cd's without issue while it was
supermounted.
--- Stefan [EMAIL PROTECTED] wrote:
Fresh Xmas install with no /etc/fstab adaptions by
hand...
(the first)
... there where only seconds to finish writing a CD
... I opened the
MidnightCommander
Guillaume Rousse wrote:
Ainsi parlait Chmouel Boudjnah :
JJ [EMAIL PROTECTED] writes:
Latest XFree86-server cooker breaks agp support on my system,
video card Radeon 7200 64meg
Asus A7Pro
Duron 700
kernel-2.4.17-6
XFree86-server-4.0.2-1 (I think?)
older server from xmas
Sergio Korlowsky wrote:
On Saturday 26 January 2002 11:31, you wrote:
- Dumb question - are the iso's going to be in the usual place, ie
- the ../Mandrake-iso/i586 dirctory on the mirrors?
-
- V.
-
-
-
I have been looking all over, and still there is no MDK-8.2 Beta1 .iso files
as
Borsenkow Andrej wrote:
Silvestro Franco [EMAIL PROTECTED] writes:
I try cc to Warly...may be he can do something for synching mirrors
before
this cooker-weekend...;o)
I tried ftp.uninett.no , carroll.cac.psu.edu, sunet
Cu...;o)
most of the mirrors are only updated
Charles A Edwards wrote:
I think it must be my day for vid problems.
System using Radeon 32MB DDR.
After updating to xfree-4.1.99.6-2, GL is shit.
GL games, some will still launch but none are playable.
Mesa gears runs at a whopping 87fps.
Using Enlightenment when I iconify an app it
J.P. Pasnak wrote:
On Monday 14 January 2002 17:49, you wrote:
On Mondayen den 14 January 2002 23.41, you wrote:
While using Kword to output a PDF file from a document I get an error.
A print error occured. Error message received from system.
It then goes on to describe the
guran wrote:
Hi
I met the new wizard on my way into the new cooker - and i don't like the way
it is used.
I don't trust any * program. that collects personal data about me and
then opts for register to a company.
If you want to use that * program, I advice you to make the user
Florin wrote:
[EMAIL PROTECTED] (Leon Brooks) writes:
Yura Gusev wrote:
Can you please disable root login by default.
PermitRootLogin no
On the topic of OpenSSH, gFTP version 2.0.9 understands OpenSSH's sftp
server, and Brian Masney (primary author) says he has an alpha version
SI Reasoning wrote:
Strange one here after updating my kernel I
rebooted and could not get past the blue screen when
logging into kde. The box that lets you know what is
opening in kde does not show. This happened before and
after updating to the latest kdebase, etc. I can't
figure
For some of you canadians, and others who work hard, I would like
to ASK you, take a second or 3,
and slow down...I think we're getting ready for a code-freeze, so in the
meantime, I'll aks you to
turn to page 198/dev/null and repeat AFTER me:
Salane wrote:
The rsync for ftp.uio.no is really stopped this morning on recieving file
list. rsync for ftp.sunet.se is slow too. What is going on?
pinging ftp.uninett.no gives me bad sequence packets every 3 or 4 pings,
and terrible latency (150ms+)
Same here, I've had Mandrake on my other partition (ext2) since
win95---winME, and have used windows update with no problems, we,
no problems with the ext2 partition, or Lilo..
Cheers,
JJ
S B wrote:
I have been running WinME, 2K with many update successfully, without
it affecting
Just because it's close (physically)(sic) to you does not indicate how close it
actually is in internet topography, try a traceroute to the LOWEST/FASTEST path!
Eaon wrote:
While we are on the subject of messed up mirrors, Cadvision
(ftp.cadvision.com) is listed on the cooker mirrors page,
Yes, my latest upgrade left X totally unuseable, it goes to the blue screen,
I see the mouse pointer for a few milliseconds, then it exits, NO errors
tho
Duron 700, voodoo3 3000 AGP, KDE manager, I think it might have been libs
related? I'll try a fresh install tomorrow and see what happens,
38 matches
Mail list logo
