http://qa.mandrakesoft.com/show_bug.cgi?id=2369
--- Additional Comments From [EMAIL PROTECTED] 2003-07-09 03:12 ---
Okay, the good news is usb-storage is now loading automatically. The bad news
is that the PSC 2210 still doesn't get automounted. When I first put a memory
card in the
http://qa.mandrakesoft.com/show_bug.cgi?id=2369
[EMAIL PROTECTED] changed:
What|Removed |Added
AssignedTo|[EMAIL PROTECTED] |[EMAIL PROTECTED]
--- Additional Comme
http://qa.mandrakesoft.com/show_bug.cgi?id=2369
--- Additional Comments From [EMAIL PROTECTED] 2003-03-05 02:45 ---
Okay, sorry I couldn't respond sooner. I just upgraded to RC2, and most of the problem
seems to be resolved. The printer module loaded automatically. However, usb-stora
http://qa.mandrakesoft.com/show_bug.cgi?id=2369
--- Additional Comments From [EMAIL PROTECTED] 2003-02-27 00:05 ---
Can you add a line "PRINTER=yes" into /etc/sysconfig/usb to see whether this
makes the module properly loaded (normally Printerdrake should do this
automatically)?
http://qa.mandrakesoft.com/show_bug.cgi?id=2369
--- Additional Comments From [EMAIL PROTECTED] 2003-02-26 23:46 ---
Hi Till,
The problem seems to be that even after I run printerdrake, the printer's
module is never loaded. :-\ In the above bug report, I had used
printerdrake
http://qa.mandrakesoft.com/show_bug.cgi?id=2369
--- Additional Comments From [EMAIL PROTECTED] 2003-02-26 14:59 ---
The case that the module is not automatically loaded when plugging the device in
is probably a hardware bug of the device not reporting back the correct device
class. To
http://qa.mandrakesoft.com/show_bug.cgi?id=2369
--- Additional Comments From [EMAIL PROTECTED] 2003-02-26 01:28 ---
Scratch that. I got my printer to work with RC2. After plugging it in a walking
through add new printer "wizard" (lack of a better term), it came up fine. But
I think
http://qa.mandrakesoft.com/show_bug.cgi?id=2369
--- Additional Comments From [EMAIL PROTECTED] 2003-02-26 00:42 ---
Tim, have you tried any other USB devices? If so, do they register
automatically? I ask this because I couldn't get my usb devices to register.
More specifically, I had
http://qa.mandrakesoft.com/show_bug.cgi?id=2369
--- Additional Comments From [EMAIL PROTECTED] 2003-02-26 00:06 ---
Yeah, what you are seeing is *probably* hotplug at work, in the cases you
describe. Here is what rpm -qi reveals about hotplug:
"This package contains the scripts
http://qa.mandrakesoft.com/show_bug.cgi?id=2369
--- Additional Comments From [EMAIL PROTECTED] 2003-02-25 23:50 ---
That's an extremely good question and one that I would like to know the answer
to as well. I thought that hotplug only reffered to PCI/PMCIA devices. However,
I know t
http://qa.mandrakesoft.com/show_bug.cgi?id=2369
--- Additional Comments From [EMAIL PROTECTED] 2003-02-25 23:12 ---
Hi, yes, I'm using the hp instructions, as far as I know, down to the letter. In
fact David (the developer of the hpoj driver) helped me get things going
last fall.
https://qa.mandrakesoft.com/show_bug.cgi?id=2369
--- Additional Comments From [EMAIL PROTECTED] 2003-02-25 18:12 ---
Have you tried following the instructions for the hpoj project. Right now due
to the complexity of the multifunction devices, it's necessary to use the hp
solution at
https://qa.mandrakesoft.com/show_bug.cgi?id=2369
--- Additional Comments From [EMAIL PROTECTED] 2003-02-25 00:36 ---
In addition to loading "printer" when detecting the PSC 2210, the system should
load usb-storage, as the built in photocard reader may be accessed using USB
Mass Storag
13 matches
Mail list logo