On Sat, 8 Sep 2001, Pixel wrote:
{ it uses /dev/sg0 /dev/sg1 ... and should work flawlessly.
{ the pb is that scsi_hostadapter is not probed again. adding:
{
{ probeall scsi-hosts scsi_hostadapter
{
{ in /etc/modules.conf fixes it (since scsi-hosts is modprobe'd in
{ modules.devfs). I'm adding t
Borsenkow Andrej <[EMAIL PROTECTED]> writes:
> Ah! I wondered what scsi-hosts in modules.devfsd is supposed to refer
> to.
>
> You mean
>
> probeall scsi-hosts scsi-hostadapter scsi-hostadapeter1 ...
>
> of course? Is kudzu aware about it (when I plug additional hostadapter
> after installa
>
> [...]
>
> > Then I think I know what happens. When ide-scsi is unloaded, device
> > nodes are destroyed. They should be recreated on acess, but are not.
It
> > means, that cdrecord is using some device nodes that are not listed
in
> > /dev/modules.devfs
> >
> > Could you please remove ide-sc
Borsenkow Andrej <[EMAIL PROTECTED]> writes:
[...]
> Then I think I know what happens. When ide-scsi is unloaded, device
> nodes are destroyed. They should be recreated on acess, but are not. It
> means, that cdrecord is using some device nodes that are not listed in
> /dev/modules.devfs
>
> Co
>
> Thanks for your hint. If I don't use devfs I don't have this
behaviour, my
> CD-R is always available.
>
> { Also, you can possibly find valuable information in the logs
> { (/var/log/syslog, /var/log/messages, etc).
>
> Looking at the logs and looking the output of lsmod, I see that the
>
On 8 Sep 2001, Guillaume Cottenceau wrote:
{ Denis Pelletier <[EMAIL PROTECTED]> writes:
{
{ > Hello,
{ >
{ > I'm using devfs with an up-to-date cooker and I'm experiencing a weird
{ > behaviour with my CD-ROM and CD-R (I'm burning CD's this afternoon). I'm
{ > losing my SCSI devices.
{ >
{ > Jus
Denis Pelletier <[EMAIL PROTECTED]> writes:
> Hello,
>
> I'm using devfs with an up-to-date cooker and I'm experiencing a weird
> behaviour with my CD-ROM and CD-R (I'm burning CD's this afternoon). I'm
> losing my SCSI devices.
>
> Just after booting, everything is fine. I'm using ide-scsi and