I believe the recommendation is to start with one of the boards closest to what you have (ie. one of the boards with the same northbridge, southbridge, and superio), try to figure out any adjustments you can tell it needs and test and debug.
The northbridge is part of the cpu and depends on which cpu you install. For the fx series it would be agesa family 15tn. I'm not sure how the cpu support works, depending on your build, you may only get support for certain processor families? I don't think the agesa code is very well supported. You posted your flashrom log in place of your superiotool log, but the manual says it has an ITE superio. There are amd sb700 boards on boardstatus with either the ITE IT8712F or ITE IT8718F. For flashing you would need a testclip and something to drive it. The dual bios feature won't help with coreboot, since it isn't jumper/ hardware switched based that I can tell. I was going to mention needing to figure out the option rom or graphics init for the onboard graphics, but it looks like your using a separate video card, so it can probably be ignored. Hopefully this helps you and I didn't get too much of it wrong. _______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-le...@coreboot.org
