This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear TLINDEN,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.076. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Fri Mar 2 09:25:46 2007] Trying to get
'http://www.cpan.org/authors/id/T/TL/TLINDEN/Config-General-Validate-1.03.tar.gz'
[MSG] [Fri Mar 2 09:25:47 2007] Trying to get
'http://www.cpan.org/authors/id/T/TL/TLINDEN/CHECKSUMS'
[MSG] [Fri Mar 2 09:25:48 2007] Checksum matches for
'Config-General-Validate-1.03.tar.gz'
[MSG] [Fri Mar 2 09:25:48 2007] Extracted 'Config-General-Validate-1.03/'
[MSG] [Fri Mar 2 09:25:48 2007] Extracted
'Config-General-Validate-1.03/Changelog'
[MSG] [Fri Mar 2 09:25:48 2007] Extracted
'Config-General-Validate-1.03/MANIFEST'
[MSG] [Fri Mar 2 09:25:48 2007] Extracted
'Config-General-Validate-1.03/Makefile.PL'
[MSG] [Fri Mar 2 09:25:49 2007] Extracted 'Config-General-Validate-1.03/README'
[MSG] [Fri Mar 2 09:25:49 2007] Extracted 'Config-General-Validate-1.03/t/'
[MSG] [Fri Mar 2 09:25:49 2007] Extracted
'Config-General-Validate-1.03/t/run.t'
[MSG] [Fri Mar 2 09:25:49 2007] Extracted
'Config-General-Validate-1.03/Validate.pm'
[MSG] [Fri Mar 2 09:25:49 2007] Extracted 'Config::General::Validate' to
'/export/home/chris/perl588/.cpanplus/5.8.8/build/Config-General-Validate-1.03'
[MSG] [Fri Mar 2 09:25:51 2007] Checking if your kit is complete...
Looks good
Writing Makefile for Config::General::Validate
[MSG] [Fri Mar 2 09:25:51 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING
'sub return value'
[MSG] [Fri Mar 2 09:25:54 2007] cp Validate.pm
blib/lib/Config/General/Validate.pm
Manifying blib/man3/Config::General::Validate.3
[ERROR] [Fri Mar 2 09:25:56 2007] MAKE TEST failed: Illegal seek
PERL_DL_NONLAZY=1 /export/home/chris/perl588/bin/perl "-MExtUtils::Command::MM"
"-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/run....
# Failed test 'require Config::General::Validate;'
# at t/run.t line 9.
# Tried to require 'Config::General::Validate'.
# Error: Can't locate Regexp/Common/URI/RFC2396.pm in @INC (@INC contains:
.
/export/home/chris/perl588/.cpanplus/5.8.8/build/Config-General-Validate-1.03/blib/lib
/export/home/chris/perl588/.cpanplus/5.8.8/build/Config-General-Validate-1.03/blib/arch
/export/home/chris/perl588/.cpanplus/5.8.8/build/Config-General-Validate-1.03/blib
/export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int
/export/home/chris/perl588/lib/5.8.8
/export/home/chris/perl588/lib/site_perl/5.8.8/i86pc-solaris-thread-multi-64int
/export/home/chris/perl588/lib/site_perl/5.8.8
/export/home/chris/perl588/lib/site_perl) at
/export/home/chris/perl588/.cpanplus/5.8.8/build/Config-General-Validate-1.03/blib/lib/Config/General/Validate.pm
line 16.
# BEGIN failed--compilation aborted at
/export/home/chris/perl588/.cpanplus/5.8.8/build/Config-General-Validate-1.03/blib/lib/Config/General/Validate.pm
line 16.
# Compilation failed in require at (eval 3) line 2.
Can't locate object method "new" via package "Config::General" at t/run.t line
80.
# Looks like you planned 19 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-19
Failed 19/19 tests, 0.00% okay
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/run.t 255 65280 19 37 1-19
Failed 1/1 test scripts. 19/19 subtests failed.
Files=1, Tests=19, 0 wallclock secs ( 0.34 cusr + 0.08 csys = 0.42 CPU)
Failed 1/1 test programs. 19/19 subtests failed.
*** Error code 255
make: Fatal error: Command failed for target `test_dynamic'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Regexp::Common::URI::RFC2396
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'TLINDEN ([EMAIL PROTECTED])',
... # other information
PREREQ_PM => {
'Regexp::Common::URI::RFC2396' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = C
PATH =
/export/home/chris/perl/bin:/usr/sfw/bin:/usr/ccs/bin:/usr/local/bin:/usr/bin:
PERL5LIB =
:/export/home/chris/perl588/.cpanplus/5.8.8/build/Config-General-Validate-1.03/blib/lib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Config-General-Validate-1.03/blib/arch:/export/home/chris/perl588/.cpanplus/5.8.8/build/Config-General-Validate-1.03/blib
PERL5_CPANPLUS_IS_RUNNING = 14794
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /export/home/chris/perl588/bin/perl
UID: $< = 100
EUID: $> = 100
GID: $( = 1 1
EGID: $) = 1 1
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=solaris, osvers=2.10, archname=i86pc-solaris-thread-multi-64int
uname='sunos soleil 5.10 generic_118855-33 i86pc i386 i86pc '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -fno-strict-aliasing -pipe
-Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV
-DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV',
optimize='-O',
cppflags='-D_REENTRANT -fno-strict-aliasing -pipe
-Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='3.4.3 (csl-sol210-3_4-branch+sol_rpath)',
gccosandvers='solaris2.10'
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib '
libpth=/usr/local/lib /usr/lib /usr/ccs/lib
libs=-lsocket -lnsl -ldl -lm -lpthread -lc
perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc
libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' -R
/export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/CORE'
cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'
