Re: panic on shutdown

2018-12-08 Thread Stefan Hertenberger
I did a couple of reboots and the problem seems to be gone. Thank you, for the quick fix. Regards Stefan >Can you try the attached patch ? -- Diese Nachricht wurde von meinem Android-Gerät mit K-9 Mail gesendet.

Re: panic on shutdown

2018-12-08 Thread Stefan Hertenberger
> Can you try the attached patch ? yes, currently building a new kernel and doing some tests. Thank you, for your quick reply!

panic on shutdown

2018-12-08 Thread Stefan Hertenberger
Hello, most of the time current panics on shutdown. Should i file a bug report? thanks Stefan [ 125193,164748] syncing disks... done [ 125193,224761] unmounted procfs on /proc type procfs [ 125193,244769] unmounted ptyfs on /dev/pts type ptyfs [ 125193,264777] unmounted kernfs on /kern type ker

8.99.12 hang

2018-01-14 Thread Stefan Hertenberger
Hello, i have those hang's too. For me current, 8, 7.1.1 is affected, 7.0.2 doesn't hang. I could break into the debugger and reboot. The hangs appear even when the laptop is idle mostly after a couple of minutes, sometimes it take longer up to a couple of hours. regards Stefan

8.99.12 hang

2018-01-14 Thread Stefan Hertenberger
Hello, i have those hang's too. For me current, 8, 7.1.1 is affected, 7.0.2 doesn't hang. I could break into the debugger and reboot. The hangs appear even when the laptop is idle mostly after a couple of minutes, sometimes it take longer up to a couple of hours. regards Stefan

Re: dmesg spam: ahcisata0 port 1: active 2 is 0x40000001 tfd 0x2051

2017-11-12 Thread Stefan Hertenberger
Am 10. November 2017 14:16:51 MEZ schrieb Martin Husemann : >On Fri, Nov 10, 2017 at 02:11:12PM +0100, Jaromír Dole?ek wrote: >> The TFD 0x2051 corresponds to Media Changed error, with DRDY/ERR >status >> bits. Is it possible this message appears every time you change media >in >> the cd0? >> >>

Re: dmesg spam: ahcisata0 port 1: active 2 is 0x40000001 tfd 0x2051

2017-11-10 Thread Stefan Hertenberger
Am Fri, 10 Nov 2017 18:43:19 +0100 schrieb Jaromír Doleček : > TFES usually means an unsupported command was sent to the device, or a > command was sent while previous was finished. > > Could you please try to figure out what is the command sent to the cd0 > device just before that error? It shou

dmesg spam: ahcisata0 port 1: active 2 is 0x40000001 tfd 0x2051

2017-11-09 Thread Stefan Hertenberger
Since some time i get a lot of dmesg spam ... ahcisata0 port 1: active 2 is 0x4001 tfd 0x2051 ahcisata0 port 1: active 2 is 0x4001 tfd 0x2051 ahcisata0 port 1: active 2 is 0x4001 tfd 0x2051 ahcisata0 port 1: active 2 is 0x4001 tfd 0x2051 ... regards Stefan ve 2 is 0x4001 tfd 0

Re: current panics with urtwn0

2017-01-23 Thread Stefan Hertenberger
Spam detection software, running on the system "vbsd.hertenberger.bayern", has identified this incoming email as possible spam. The original message has been attached to this so you can view it or label similar future email. If you have any questions, see postmaster for details. Content preview:

current panics with urtwn0

2017-01-23 Thread Stefan Hertenberger
Spam detection software, running on the system "vbsd.hertenberger.bayern", has identified this incoming email as possible spam. The original message has been attached to this so you can view it or label similar future email. If you have any questions, see postmaster for details. Content preview:

Re: Beagleboard C4 problems

2016-10-11 Thread Stefan Hertenberger
Am Tue, 11 Oct 2016 17:49:30 +0900 (JST) schrieb KIYOHARA Takashi : > Or do you have access to the Linux source? In this case .dts file is > want. i guese you mean this https://github.com/torvalds/linux/blob/b66484cd74706fa8681d051840fe4b18a3da40ff/arch/arm/boot/dts/omap3-beagle.dts

Re: Beagleboard C4 problems

2016-10-11 Thread Stefan Hertenberger
agleboard/ but there is no .dtb file in /boot Kind regards Stefan Hertenberger

Beagleboard C4 problems

2016-10-10 Thread Stefan Hertenberger
Hello, i have still problems with my beagleboard, with the image from 2016/10/10 the previous error is gone, so nomore timeouts sdhc0: timeout waiting for mask 0x400 value 0x400 (state=0x1e70106) sdhc0: timeout waiting for mask 0x3 value 0 (state=0x1e70506) sdhc0: command or data phase inhibited

Fwd: Re: drmkms panic

2016-08-07 Thread Stefan Hertenberger
Ursprüngliche Nachricht Von: Stefan Hertenberger Gesendet: 5. August 2016 22:46:31 MESZ An: co...@sdf.org Betreff: Re: drmkms panic Am , schrieb co...@sdf.org: > > > The problem is pretty obvious. netbsd kmem_alloc doesn't like > allocating > zero-s

drmkms panic

2016-08-02 Thread Stefan Hertenberger
Hello, i hope this dump's are more useful, latest sources compiled with debug symbols. https://www.alarum.de/netbsd/netbsd.2.gz https://www.alarum.de/netbsd/netbsd.2.core.gz the kernel with debug symbols, not sure this is needed https://www.alarum.de/netbsd/netbsd.gdb.gz regards, S

drmkms panic

2016-07-31 Thread Stefan Hertenberger
Hello,   when i try to start graphics/blender from pkgsrc my system panics. I use a radeon hd 7650 and modular xorg.   the crash dumps are available here: www.alarum.de/netbsd/netbsd.0.gz www.alarum.de/netbsd/netbsd.0.core.gz   i am not subscribed to the mailing list, please cc me.   bsd6

ath0n crash

2013-06-23 Thread Stefan Hertenberger
Hello, i use netbsd current on a Packard Bell TS11HR-267GE, after upgrading to the latest sources, i get a kernel panic. Jun 23 20:13:10 nbbook dhcpcd[368]: athn0: offered 192.168.1.21 from 192.168.1.50 Jun 23 20:13:14 nbbook dhcpcd[368]: athn0: carrier lost Jun 23 20:13:18 nbbook dhcpcd[368]: at