hello. If you put a gpt label on a raid set and add partitions to it,
those partitions
will show up as dkn devices automatically, when the raid set is configured.
This is true
whether the raid set is configured automatically by the kernel at boot or
manually via raidctl
-C or -c.
This
On 2024-03-17 12.04, B Harder wrote:
On Mar 16, 2024, at 23:16, Greg Oster wrote:
RAIDframe doesn't understand NAME=gpt-label. Use /dev/dk , and then set the
RAID set to autoconfigure. It'll magically figure out what devices need to be glued
together.
Hey Greg, can you explain that
> On Mar 16, 2024, at 23:16, Greg Oster wrote:
>
>
>
>> On 2024-03-16 21.58, Paul Goyette wrote:
>>> On Sat, 16 Mar 2024, Paul Goyette wrote:
>>> Does anyone have an example of how to configure raid0 on a GPT disk?
>>>
>>> I can easily set the partition type with gpt, but how do I reserve
On Sat, Mar 16, 2024 at 10:58:18PM -0600, Greg Oster wrote:
> On 2024-03-16 21.58, Paul Goyette wrote:
> > On Sat, 16 Mar 2024, Paul Goyette wrote:
>
> You can use GPT instead of mbr. Wedges should show up automatically (I'm
> pretty sure they do, but since I do NFS exporting of mine, I stuck
On 2024-03-16 21.58, Paul Goyette wrote:
On Sat, 16 Mar 2024, Paul Goyette wrote:
Does anyone have an example of how to configure raid0 on a GPT disk?
I can easily set the partition type with gpt, but how do I reserve
space for the raid component label? Do I need to reserve that space?
p...@whooppee.com (Paul Goyette) writes:
>> Does anyone have an example of how to configure raid0 on a GPT disk?
For a manual setup, you can just reference the wedges like:
# raidctl config file for /dev/rraid0
START array
# numRow numCol numSpare
1 2 0
START disks
NAME=raid0.0
NAME=raid0.1
Paul Goyette writes:
> Does anyone have an example of how to configure raid0 on a GPT disk?
these are my notes i refer to every so often:
https://www.netbsd.org/~mrg/gpt-raid-setup.txt
it's gpt on each with type raid, which gives you dkN @ diskN,
you then create a raid with those dkNs, and then
On Sat, 16 Mar 2024, Paul Goyette wrote:
Does anyone have an example of how to configure raid0 on a GPT disk?
I can easily set the partition type with gpt, but how do I reserve
space for the raid component label? Do I need to reserve that space?
Also, does raidframe understand the