I moved my opencl_memory_headroom from 300 to 500 and still found
problems. I have now moved the value up to 800 Mb. and the system
appears to be running much more smoothly. Not sure if there will be
negative implications.
David
On 2019-03-13 12:40 p.m., Bruce Guenter wrote:
On Fri, Mar 08,
On Fri, Mar 08, 2019 at 01:01:34PM +0100, Sturm Flut wrote:
are you sure your GPU has enough resources to handle a dual-monitor
setup plus the Darktable GUI plus OpenCL? It's a six years old device
which was usually shipped with just 2 GB of dedicated video RAM.
I used to run a dual-monitor setu
Simon I really hate your answer, despite the reality!! You are of
course absolutely right .. this is a dual monitor problem and my system
is simply running out of 'steam'. I ran dt using a single monitor and
the problem simply disappears. Fortunately dt does run fairly well
without opencl
Hi,
are you sure your GPU has enough resources to handle a dual-monitor
setup plus the Darktable GUI plus OpenCL? It's a six years old device
which was usually shipped with just 2 GB of dedicated video RAM.
I used to run a dual-monitor setup with a GeForce GTX950 2GB and had
exactly the same prob
Thank you Andreas . yes, it helps to know where to put the commands
=;) Unfortunately it does not appear to have solved the problem
still very slow and the mouse jerking around, system freezing, not very
nice at all without OpenCL my system runs just fine!!
On 2019-03-07 12:43 p.
On Thursday, March 7, 2019 8:34:39 PM CET David Vincent-Jones wrote:
> Thank you Andreas . here are my results
>
> [W530 ~]# opencl_device_priority=*/!0,*/*/*
> -bash: !0: event not found
> [W530 ~]# opencl_mandatory_timeout=250
> [W530 ~]# opencl_scheduling_profile=very fast GPU
> -bash: fast
Thank you Andreas . here are my results
[W530 ~]# opencl_device_priority=*/!0,*/*/*
-bash: !0: event not found
[W530 ~]# opencl_mandatory_timeout=250
[W530 ~]# opencl_scheduling_profile=very fast GPU
-bash: fast: command not found
I am using dual monitors by the way with dt running on the ex
On Thursday, March 7, 2019 8:09:48 PM CET David Vincent-Jones wrote:
> Sorry for the lack of appropriate material ... I hope this added info is
> what you are looking for:
>
> Card is Nvidia GK107GLM (Quadro K1000M)
>
> driver=nvidia ver:415.27
>
> Operating system x86_64 Manjaro rolling release
Sorry for the lack of appropriate material ... I hope this added info is
what you are looking for:
Card is Nvidia GK107GLM (Quadro K1000M)
driver=nvidia ver:415.27
Operating system x86_64 Manjaro rolling release using Arch repos.
I am not sure if the intel driver is blacklisted does it
On Wednesday, 6 March 2019 22:06:37 CET David Vincent-Jones wrote:
> dt version: 2.7.0+594~g03d44f57e Manjaro from Arch-repos.
>
> I have recently initiated OpenCL on my system. When I start from the
> terminal (-d opencl) all indications are that all the elements are
> successfully in place ... n
dt version: 2.7.0+594~g03d44f57e Manjaro from Arch-repos.
I have recently initiated OpenCL on my system. When I start from the
terminal (-d opencl) all indications are that all the elements are
successfully in place ... no errors are shown, however the system is now
running very very slowly an
11 matches
Mail list logo
