Am 12.06.2014 19:34, schrieb Pascal Obry:
> Le jeudi 12 juin 2014 à 19:10 +0200, Ulrich Pegelow a écrit :
>> So would this also be extensible to turboprint as a driver? I know that
>> this is not an open source project but according to my experience it
>> often has the better printer drivers than G
Le jeudi 12 juin 2014 à 19:10 +0200, Ulrich Pegelow a écrit :
> So would this also be extensible to turboprint as a driver? I know that
> this is not an open source project but according to my experience it
> often has the better printer drivers than Gutenprint. If we want to
> deliver best pos
Am 12.06.2014 13:37, schrieb Pascal Obry:
> Hi Tobias,
>
>> I am not too knowledgeable about printing, but from what I understand
>> Gutenprint is "just" a set of drivers that can be used from CUPS. So in order
>> to
>> - cut down on direct dependencies and
>> - make this useful on OSX
>> I wou
Hi Tobias,
> I am not too knowledgeable about printing, but from what I understand
> Gutenprint is "just" a set of drivers that can be used from CUPS. So in order
> to
> - cut down on direct dependencies and
> - make this useful on OSX
> I would suggest to only talk to CUPS and leave it to the u
Am Donnerstag, 12. Juni 2014, 10:24:45 schrieb Pascal Obry:
> As discussed on IRC yesteday, attached a simple mock-up of the GUI
> (nothing works, just a GUI design as it would be done on paper :) and
> some notes about the initial goal for this module.
>
> Please comment.
I am not too knowledgea
Hi Pascal,
maybe you still want to add your mockup there - Roberto did many mockups
back then and most of them were quite controversial.
It's just a matter of having everything together...
Cheers,
Simon
On 06/12/2014 11:48 AM, Pascal Obry wrote:
> Hi Simon,
>
>> make sure to also have a look at
Hi Simon,
> make sure to also have a look at the print mode specs Pascal the 1st
> compiled some time ago and the attached mockups by Roberto:
> http://darktable.org/redmine/projects/darktable/wiki/Print_Mode_Specs
Did not know that this existed! But the point is that my current design is very
ve
Hej Pascal,
make sure to also have a look at the print mode specs Pascal the 1st
compiled some time ago and the attached mockups by Roberto:
http://darktable.org/redmine/projects/darktable/wiki/Print_Mode_Specs
Maybe you want to add your bits there...
Cheers,
Simon
On 06/12/2014 10:24 AM, Pasca
