Re: U-Boot-1.2.0 and NAND_Flash

Hi Dirk, Thank you for contributing! - It does the above stuff (1 & 2) and therefore makes your patch more generic. Have a look to board/davinci/nand.c part of patch in attachment. There, it introduces an additional #define ENABLE_DAVINCI_NAND_HW_ECC which can be used to switch between NAND_E

about davinci digital display interface(bt.656)

Hi,all There is anyone to do some work with vpbe user's guide about digital display interface? I see digital display interface and do some hardware to it. I use "2.2.2.1 YCC8 Signal Interface Description" and bt.656 mode. And I patch the newly kernel about digital lcd, but I can't see this lcd m

Linux Keypad Driver for DaVinci

Hello all, Is there any ready-made Linux driver for 4x4 or 3x5 Keypad? Thanks, Kim Klaiman Senior Embedded Software Engineer Bioscrypt Inc. T 905.940.7756 [EMAIL PROTECTED] www.bioscrypt.com Leading provider of enterprise access

Re: U-Boot-1.2.0 and NAND_Flash

Subashini Balaraman wrote: So we just removed them from the Makefile in the lib-arm directory in u-boot. Then, the sources in your MontaVista toolchain will be used and you can get rid of this error. I do not know of a patch for this error, but this might be an ad-hoc method that works. I d

Re: U-Boot-1.2.0 and NAND_Flash

Hi, We got those same errors about multiple definitions for the udivsi3 and divsi3 when we tried with uboot 1.1.6. So we just removed them from the Makefile in the lib-arm directory in u-boot. Then, the sources in your MontaVista toolchain will be used and you can get rid of this error. I

boot problem

I download the 2.6.20 kernel(montavista), But there's a problem. In the arch/arm/kernel/head.S, when open the MMU, mcr p15, 0, r0, c1, c0, 0,where r0 is 0x00053177, the kernel is down. The PC value in the current code position(opening MMU) is 0x80008074. And the the page tab