Will,
We have a very small DM6446 low power device (2 inches by 1/2 inch)
where the ARM needs to be running most of the time. My thought was to
turn off the DSP clock when it was not needed and only turn on the DSP
for decoding of streaming data. this would save on power and reduce
the heat
dirk behme wrote:
To see if its your kernel config or your ramdisk, can you try the
ramdisk in attachment? You have to change config to 8M for this (i.e.
CONFIG_BLK_DEV_RAM_SIZE = 8192 and initrd=...,8M)
Its an empty 8M ramdisk. The only thing in it is /dev/ram0, so kernel
should
Hi,
I downloaded the hard drive restore file from the TI updates site
(restore_1_20_00_10.tar.gz) but it seems to be corrupt, I tried downloading it
again but I had the same problem. On the TI website they say the file is 995MB
but when I downloaded it both times the file I got was only 171MB
john oliver wrote:
I changed /dev/ram0 to read brw-rw 1 root disk 1, 0 ...
The uncompressed ramdisk is way under 6M - it's 2.8M
Not sure, but to be on the safe side, your uncompressed ramdisk should
be really 6M.
I changed CONFIG_BLK_DEV_RAM_SIZE to 6144
I removed
Hi All,
I'm developing a machine vision application In any application like
this there's lots of stuff that has been done before (e.g. edge filters,
connected component labelling, threshold, etc). The TI IMGLIB does some
of what I need, but not all. I was just wondering if anyone had
Hi Euan,
I have just upgraded a board to 1.20 using the downloaded file
restore_1_20_00_10.tar.gz. The size of the file is 968.9M in the
nautilus browser. The restore script is AFIK inside the tar.
I took seven download tries here at the company, they all failed. I then
retried it at home
Vijaydeep Kiran Nadkarni wrote:
All,
I have been trying to resolve an issue that I am facing with McASP
transfer and receive drivers on TI’s DaVinci *TMS320DM6437 DVEVM*.
My workspace does:
· a real-time video decode in one thread and
· a simple audio loopback (only
