RE: installing dvevm 6446 sw on fedora

No - it works fine. Regards Phil Q Phil Quiney, Senior Software Engineer Trinity Convergence Cambridge Business Park Cowley Road Cambridge CB4 0WZ, UK T: +44(0)1223-435536 F: +44(0)1223-435560 www.trinityconvergence.com

Unable to boot my DVEVm..

Hi, Today I started to boot my DVEVM from flash and hard disk. I found the following error:-- -- U-Boot 1.1.4 (Jan 14 2008 - 13:18:38) U-Boot code: 8108 -> 81097894 BSS: -> 810A0284 RAM Configuration:

Unable to boot my DVEVm..

Hi, Today I started to boot my DVEVM from flash and hard disk. I found the following error:-- -- U-Boot 1.1.4 (Jan 14 2008 - 13:18:38) U-Boot code: 8108 -> 81097894 BSS: -> 810A0284 RAM Configuration:

Linux startup time for DM6446

Dear all, I need to configure/optimize a simple Linux kernel (either MontaVista or open-source GIT kernel) for DM6446 audio/video recorder on CF card. Has somebody done something quite similar to speedup bootup time? Which range we can get for the minimum? Is there better Linux we can use? MobLinu

How to enable Video Output of DC5

Hi, all. I want to enable the video output in DC5 of EVM board. when I measure the output voltage of pin 27(YOUT0),29(YOUT2),etc , their values all stay high. It seems nothing output. What can be the problem? I guess , I have missed something to enable it. Thanks. ___

Help! Davinci SYS_248 error!!

Hi, I cross_compiled a program that used to work on a x86 machine. everything goes fine, but when launch the program, the program exits without any error message. So I ran the strace and it showed that the last stack is SYS_248 unfinished with exit code 0. Any help? It is so similar to the pr

Re: Re: Re: Re: Davinci-EVM USB issue at git tree 2.6.23

Hi Lee, OK, I'll follow this issue. Thank you. /Frank - Receiving the following content - From: Ashuaria Lee Receiver: frank.xue Time: 2008-04-30, 09:36:33 Subject: Re: Re: Re: Davinci-EVM USB issue at git tree 2.6.23 Hi, Frank Using 2.6.23 GIT with USB on DMA mode gives me m

Re: Help! Davinci SYS_248 error!!

gather bzbz wrote: Hi, I cross_compiled a program that used to work on a x86 machine. everything goes fine, but when launch the program, the program exits without any error message. So I ran the strace and it showed that the last stack is SYS_248 unfinished with exit code 0. Any help? It is so

How to test only a codec package?

Hi All, I have created a codec package for my xDM compliant algorithm(used Audio encoder interface). I want to ensure that the codec package has been correctly created. I do not plan to create the dsp server package or codec engine. I just have to make sure my algorithm is xDM compliant and the pa

RE: How to test only a codec package?

http://wiki.davincidsp.com/index.php?title=TopTenCodecPackageCheckList -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of freebird Sent: Wednesday, April 30, 2008 10:19 AM To: davinci-linux-open-source@linux.davincidsp.com Subject: How to test only a codec p

dm355 - no RGB signals on Cout[0..7]

All, I have a weird problem going on with the dm355 evm. I'm trying to get an LCD up and running using 16-bit parallel rgb mode but when I scope all of my signal lines I'm not getting anything on the VDOUT_C[7..0] lines. I have (I believe) setup all the proper registers in the vpbe to allow for

RE: dm355 - no RGB signals on Cout[0..7]

I wanted to add that I _AM_ getting twiddling on all other lines except those mentioned. Also, I can cat an image directly to /dev/fb/0 and can see that data (although it's not properly displayed most likely due to timing/porching problems) is indeed getting read in by the LCD. BJ -Original

RE: problems on testing the shared file system

Dear Phil and Chris, I am happy tonight that finally I got it through! Now it seems my DVEVM board is willing to talk to my laptop with dhcp. Thanks for all your efforts to help me! But I have to use the login and password (see below for the last episode of output). I don't know what they ar

Re: problems on testing the shared file system

user: root no password c 2008/4/30 YangZhijun <[EMAIL PROTECTED]>: > > > > Dear Phil and Chris, > > I am happy tonight that finally I got it through! Now it seems my DVEVM > board is willing to talk to my laptop with dhcp. Thanks for all your efforts > to help me! But I have to use the login and

OLED Framebuffer Driver for GUI

I have an OLED display that is 128x128 that I have interfaced to the DM355 SPI bus. And I would like to create a Frame buffer driver for it so that I can use Minigui, or something like it to display, Buttons, Text, Menus and Status items on the display. I already have a small library for it that I

Re: OLED Framebuffer Driver for GUI

[EMAIL PROTECTED] wrote: Can anyone point me in the right direction to info about the framebuffer and customizing it to allow for an SPI output interface? Take a look at the deferred I/O support for framebuffers in the kernel. It only went in very recently (2.6.23ish IIRC), so you'll need to u

Re: OLED Framebuffer Driver for GUI

On Wed, Apr 30, 2008 at 9:11 PM, Bernard Blackham <[EMAIL PROTECTED]> wrote: > [EMAIL PROTECTED] wrote: > > > Can anyone point me in the right direction to info about the framebuffer > and customizing it to allow for an SPI output interface? > > > > Take a look at the deferred I/O support for fram