It seems like watchdog is not able to provide the hard reset.
When you restart the system , it is equivalent to POWER OFF and then POWER
ON.
In this case, at power up or after hard reset DSP looks @ BOOT PINS and
decides where to boot from , otherwise these boot pins act as GPIO (or other
Excellent! Thank you very much for that.
Now, from what I can tell, there seems to be some peripherals still
missing. Though I cannot promise any results, I would like to help. Is
there anything in particular that I should look into? I would hate
develop something that has already been
On Tuesday 19 May 2009, John Tobias wrote:
I have to rely on 2.6.10 kernel from MV at this moment, due to some
driver issue.
But do those errors happen with *current* code? If not,
then MV has an easy path to providing you bugfixes.
If you're not willing to try against current code, I think
On Friday 24 April 2009, Sudhakar Rajashekhara wrote:
+struct edma {
+ /* how many dma resources of each type */
+ unsignednum_channels;
+ unsignednum_region;
+ unsignednum_slots;
+ unsignednum_tc;
+ unsignednum_cc;
Hi,
I'm new to Ti's SoCs so I do not know if there is some way to re-use
that one. Otherwise I would suggest looking at buildroot,
OpenEmbedded, OpenWRT or some other build system that will generate a
root fs for you from a given configuration. The other option is to
build one from scratch (not
Tobias Knutsson wrote:
Hi,
I'm new to Ti's SoCs so I do not know if there is some way to re-use
that one. Otherwise I would suggest looking at buildroot,
OpenEmbedded, OpenWRT or some other build system that will generate a
root fs for you from a given configuration. The other option is to
Troy,
Thank you for reviewing these patches.
-Original Message-
From: Troy Kisky [mailto:troy.ki...@boundarydevices.com]
Sent: Monday, May 18, 2009 7:58 PM
To: Narnakaje, Snehaprabha
Cc: linux-...@lists.infradead.org; davinci-linux-open-
sou...@linux.davincidsp.com;
