Hi,
I am working with tiwlan in Davinci EVM(DM6446)
Once i reset the tiwlan i am getting interrupt.Interrupt is connected to
GPIO18
But after some time at CMD_ENABLE_RX interrupt goes low and it shows a big
exception
If anybady has similar problem or any experience with tiwlan please
sugg
Hans,
>
>I've only one request: can you add something along the lines of:
>
>"This is an experimental ioctl that will change in future kernels.
>Use with care."
>
>And at the top add: "EXPERIMENTAL IOCTL"
>
>That way it is unambiguous that this will change. And it definitely has
>to change! On th
On Thursday 02 July 2009 19:05:51 m-kariche...@ti.com wrote:
> From: Muralidharan Karicheri
>
> Re-sending to add description for VPFE_CMD_S_CCDC_RAW_PARAMS and
> updating debug prints with \n and fixing an error coder ENOMEM
>
> VPFE Capture bridge driver
>
> This is version, v3 of vpfe captur
From: Muralidharan Karicheri
DM355 CCDC hw module
Adds ccdc hw module for DM355 CCDC. This registers with the bridge
driver a set of hw_ops for configuring the CCDC for a specific
decoder device connected to vpfe.
Resending v3 to remove private ioctl IDs as per comment from Mauro
Reviewed by:
Hi,
When the framebuffer driver is enabled, Video can't be displayed
through V4L2.
Here is the setup :
V4L2 display and framebuffer driver are enabled.
Kernel command line contains
video=davincifb:vid0=off,vid1=off
The V4L2 application runs fine, but nothing on the output,
wether OSD window 0 i
On Wed, Jul 01, 2009 at 23:24:21, Kevin Hilman wrote:
> "Rajashekhara, Sudhakar" writes:
>
> > This patch also fixes broken CONFIG_DEBUG_LL support
> > on DA830/OMAP-L137 EVM caused by my previous patch.
>
> hmm...
>
> > diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h
> > b/arch/arm/