Re: [PATCH v3 1/2] i2c: Add SDA and SCL pin numbers to i2c platform data

Kevin, On Tue, 2010-01-12 at 16:47 +0530, Philby John wrote: From cb3347e45449ff16a332aa164eae24ef6a2432e6 Mon Sep 17 00:00:00 2001 From: Philby John pj...@in.mvista.com Date: Mon, 11 Jan 2010 15:53:31 +0530 Subject: [PATCH 1/2] Add SDA and SCL pin numbers to i2c platform data Patch adds

[PATCH] ASoC: DaVinci: Updates to EVM hardware params callback

For S/PDIF transciever codec to work on TI DM6467 EVM, the codec ops pointer should be checked for in the params callback. This dummy codec has no set_fmt or set_sysclk implementations. Tested on TI DM6467 EVM. Signed-off-by: Chaithrika U S chaithr...@ti.com Tested-by: Anuj Aggarwal

[PATCH] ASoC: DaVinci: Fix stream restart error

Sometimes after a suspend-resume cycle, the ALSA application restarts the stream when resume fails and McASP fails to work as the clock is not enabled. This patch corrects this bug. Testes on TI DA850/OMAP-L138 EVM. Signed-off-by: Chaithrika U S chaithr...@ti.com --- Applies to ALSA GIT tree on

RE: [PATCH] ASoC: DaVinci: Fix stream restart error

All, Please ignore this patch, missed the 'To' address in the mail. I have re-submitted this patch. Regards, Chaithrika On Wed, Jan 20, 2010 at 17:04:45, alsa-de...@alsa-project.org wrote: From: Chaithrika U S chaithr...@ti.com Sometimes after a suspend-resume cycle, the ALSA application

DMA:HELP

hello everyone we have made our own custom board DM6446  Have used the open source  Linux I want to disable the DMA When I do cat /proc/iomem 01c0-01c0 : edma_cc0      01c0-01c0 : edma.0   

Re: DMA:HELP

Hello. rohan tabish wrote: hello everyone we have made our own custom board DM6446 Have used the open source Linux I want to disable the DMA When I do cat /proc/iomem 01c0-01c0 : edma_cc0 01c0-01c0 : edma.0

Re: Any insight into what MP4VENC_TI_DM350_SequenceReset does?

Greetings: Hi, I'm getting a floating point exception when I run the mp4enc algorithm. A back trace of the core dump shows: Program terminated with signal 8, Arithmetic exception. #0 0x403e631c in raise () from /lib/libpthread.so.0 (gdb) bt #0 0x403e631c in raise () from

RE: Any insight into what MP4VENC_TI_DM350_SequenceReset does?

Hi, Thanks, that's a huge help. I have verified that the codec runs in the (simple) test apps provided with the codec engine. It's when I go to the huge dvsdk apps that it breaks. This did start with a migration from the Montavista kernel to the Arago kernel, so maybe I've screwed up the build

dm365 - ubl sources

We are working on ubl booting from spi flash and booting u-boot from 1-bit ecc 16-bit nand flash. We start the custimization from http://www.linux-davinci.info/data/boot/dm3xx_sd_boot-6.1.tgz . We can copy the ubl itself to the IRAM and then run it. We have written the u-boot to nand using the

RE: Any insight into what MP4VENC_TI_DM350_SequenceReset does?

Paul Stuart paul_stu...@seektech.com wrote on 01/20/2010 11:08:12 AM: Hi, Thanks, that's a huge help. I have verified that the codec runs in the (simple) test apps provided with the codec engine. It's when I go to the huge dvsdk apps that it breaks. This did start with a migration from the

openocd on dm355

Hi, I use git to download the newest OpenOCD, and compile with this configure ./configure --enable-maintainer-mode ---enable-jlink I write the openocd.cfg like the following: *gdb_port telnet_port tcl_port source [find interface/jlink.cfg] jtag_khz 1500 source [find

RE: [PATCH] ARM: DaVinci: Audio support for DA850/OMAP-L138 EVM

Hello. -Original Message- From: davinci-linux-open-source-boun...@linux.davincidsp.com [mailto:davinci-linux-open-source- ... On DA850/OMAPL138 the McASP AMUTE pin is multiplexed with UART2_RTS. As a consequence, I believe, of the below additions when the kernel is built with