On Tue, May 24, 2011 at 10:02 AM, Christian Riesch
wrote:
>
> Signed-off-by: Christian Riesch
> ---
>
> Hi again,
> how about this solution? I just took a look how this is solved on other
> ARM platforms.
> Regards, Christian
>
>
> arch/arm/mach-davinci/board-da850-evm.c | 4 +++-
> arch/
On Wed, Apr 13, 2011 at 11:10 AM, Nori, Sekhar wrote:
>
> Hi Ben,
>
> On Wed, Apr 06, 2011 at 03:08:09, Ben Gardiner wrote:
> > Both the da850 and da830 have an I2C controller which has the ICPFUNC
> > registers. Indicate this for all da830 and da850 boards by setting the
> > has_pfunc flag true i
On Wed, Sep 1, 2010 at 1:20 PM, Gaer, A. wrote:
>
> Hello all,
>
> I am trying to find out, why the ethernet transmit performance of my device
> is rather poor. Using a DM368 chip, the live555 streaming framework is able
> to transmit a data rate of ~30 MBit/s using 70% CPU load. This is rather
2010/7/16 Joe Perches
> On Fri, 2010-07-16 at 10:00 -0400, Michael Williamson wrote:
> > +static __init void mityomapl138_setup_lcd(void)
> > +{
> []
> > + pr_warning("mityomapl138_init: unknown LCD type :
> %s\n",
> > + peripheral_config.LCDConfig.
Not sure if this is the right place for this...
It looks like the latest version of the linux utilities (specifically CMEM
for the OMAP-L138) no longer build with kernel Revs >= 2.6.34. This
is due to the change in the dma-api (e.g., the dmac_inv_range and
clean functions have gone away). I trie
Hi John,
In the past, we've used the /dev/mtd* devices to write data back to NOR (spi
/ parallel) devices for updating firmware using something like:
dd if=newimage.bin of=/dev/mtd0
Of course, you need to have your kernel configured to have the mtd drivers
loaded and you need to make these areas
Hi,
I've been working with Kevin's tree and have been having some problems
with the SPI interface for the DA850 (OMAP-L138), SPI version 2.
I am getting a lot of failures in the davinci_spi_check_error routine
that I'm not sure are real errors. I was googling around and found
this thread:
http:
On Wed, Mar 17, 2010 at 8:17 AM, Steve Chen wrote:
> On Fri, Mar 12, 2010 at 7:06 PM, Mike Williamson
> wrote:
>>
>>
>> On Fri, Mar 12, 2010 at 5:18 PM, Kevin Hilman
>> wrote:
>>>
>>> "Nori, Sekhar" writes:
>>>
>>>
On Fri, Mar 12, 2010 at 5:18 PM, Kevin Hilman
wrote:
> "Nori, Sekhar" writes:
>
> > On Thu, Mar 11, 2010 at 11:45:47, Jon Povey wrote:
> >> Steve Chen wrote:
> >> > On Wed, Mar 10, 2010 at 12:49 AM, Jon Povey
> >> > wrote:
> >>
> >> >> We have 3 different boards using DM355, with different gpio