booting.
With best regards,
Venkat.
--
From: Vilmos Varga [vva...@yahoo.com]
Sent: Thursday, September 03, 2009 12:32 PM
To: Venkatachala Upadhya
Subject: RE: Filesystem loading problem at 2.6.31 kernel on DM355 platform
Hi,
I can't load the filesystem
. I have searched through and I could not get this library.
Is this library also made during the dvsdk build?
If it is built during dvsdk build,
can one help me as how I can re-build the same?
If this is a pre-built library, how can I get it?
With best regards,
Venkatachala Upadhya| Extn: 65395
Hello team,
I got the dsplinkdata.lib. During the build, it was created at /tmp/dsp_0
With best regards,
Venkatachala Upadhya| Extn: 65395|
--
From: Venkatachala Upadhya
Sent: 04 August, 2009 1:06 PM
To: davinci-linux-open-source@linux.davincidsp.com
Subject: Is dsplinkdata.lib missing from
Hello Team,
I am trying re-build decodeCombo.x64P for dvsdk 2.0, downloaded from the TI web
site
http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/dvsdk/index.html
I am getting the following error, during linking - Any clue, as what library I
am missing?
---
Hi,
This could happen when you have two binaries compiled with two different
versions of compiler (more specifically tool chain binaries) and trying to link
with one of the tool chain.
Make sure that all of the binaries are compiled using same tool chain.
With best regards,
Venkatachala
,
Venkatachala Upadhya| Extn: 65395|
--
From: davinci-linux-open-source-boun...@linux.davincidsp.com
[mailto:davinci-linux-open-source-boun...@linux.davincidsp.com] On Behalf Of
omkar savagaonkar
Sent: 07 July, 2009 10:38 AM
To: davinci-linux-open-source@linux.davincidsp.com
Subject: DM6446
Hi,
You can connect a USB HUB and connect both the devices. We are using keyboard
and the mouse in the
same fashion.
With best regards,
Venkatachala Upadhya| Extn: 65395|
--
From: davinci-linux-open-source-boun...@linux.davincidsp.com
[mailto:davinci-linux-open-source-boun
.
.
.
.
Registering platform device 'mmc.0'. Parent at platform
.
.
.
mmc mmc.0: Supporting 4-bit mode
mmc mmc.0: Using DMA mode
.
.
.
By default, mmc sd card can be accessed by mounting the device /dev/mmcblk0
With best regards,
Venkatachala Upadhya| Extn: 65395|
--
-Original Message
Hello All,
I have a Blackhawk JTAG Emulator (USB560M). Using this I can debug DSP side
(C64x) program. Can I use the same to debug the ARM side program?
With best regards,
Venkatachala Upadhya| Extn: 65395|
--
http://www.mindtree.com/email/disclaimer.html
Hi,
I am using DM6446. I have a user selection switch which configures the board to
either NTSC standard or PAL standard. Do you also have such settings?
You may have to check it up.
With best regards,
Venkatachala Upadhya| Extn: 65395|
--
From: davinci-linux-open-source-boun
Hello,
As I understand, one need to set the OSD transparency to see the video
( displayed on /dev/fb/3). Even the demo program on DVEVM board
from TI does sets the OSD transparency. Could this be the issue?
With best regards,
Venkatachala Upadhya| Extn: 65395|
--
From: davinci-linux-open
Hello,
See the below post, in the mailing list. If that helps!
http://linux.omap.com/pipermail/davinci-linux-open-source/2009-March/011957.html
With best regards,
Venkatachala Upadhya| Extn: 65395|
--
-Original Message-
From: davinci-linux-open-source-boun...@linux.davincidsp.com
it? If that is possible, how to
get the sources, so that I can customize?
If this is not possible, can anyone suggest me the good starting point?
Thanks!
With best regards,
Venkatachala Upadhya| Extn: 65395|
--
http://www.mindtree.com/email/disclaimer.html
Hello,
Any one has the download link handy for DVSDK 1.40 from TI site?
I could only see DVSDK 1.30 for down load and not DVSDK 1.40.
I have a valid login user ID to access the information.
With best regards,
Venkatachala Upadhya| Extn: 65395|
--
http://www.mindtree.com/email/disclaimer.html
With best regards,
Venkatachala Upadhya| Extn: 65395|
--
-Original Message-
From: Venkatachala Upadhya
Sent: 15 May, 2009 4:29 PM
To: davinci-linux-open-source@linux.davincidsp.com
Subject: DVSDK 1.40 for DM6446
Hello,
Any one has the download link handy for DVSDK 1.40 from TI site?
I
! TIDmaiVideoSink displayStd=fbdev
displayDevice=/dev/fb/3 videoStd=D1_NTSC videoOutput=COMPOSITE resizer=TRUE
accelFrameCopy=TRUE
With best regards,
Venkatachala Upadhya| Extn: 65395|
--
From: davinci-linux-open-source-boun...@linux.davincidsp.com
[mailto:davinci-linux-open-source-boun
try this,
gst-launch-0.10 v4lsrc device=/dev/video0 ! ffmpegcolorspace ! TIVidenc ! queue
! TIViddec ! TIDmaiVideoSink displayStd=fbdev displayDevice=/dev/fb/3
videoStd=D1_NTSC videoOutput=COMPOSITE resizer=TRUE accelFrameCopy=TRUE
With best regards,
Venkatachala Upadhya| Extn: 65395|
--
From
signal light, but this page also has GREY colour.
Thanks,
With best regards,
Venkatachala Upadhya| Extn: 65395|
--
-Original Message-
From: davinci-linux-open-source-boun...@linux.davincidsp.com
[mailto:davinci-linux-open-source-boun...@linux.davincidsp.com] On Behalf Of
Narnakaje
Hello Steve,
Is the MVL 2.6.18 kernel available for down load? If you have the down load
link handy, can you send it to me and the list please?
Thanks!
With best regards,
Venkatachala Upadhya| Extn: 65395|
--
-Original Message-
From:
davinci-linux-open-source-bounces
Hi,
How are you incrementing the time_elapse ?
You can to use sleep system call after Engine_getCpuLoad(engine). It appears
that you are not using this.
With best regards,
Venkatachala Upadhya| Extn: 65395|
--
From: davinci-linux-open-source-boun...@linux.davincidsp.com
[mailto:davinci
regards,
Venkatachala Upadhya| Extn: 65395|
--
From: davinci-linux-open-source-boun...@linux.davincidsp.com
[mailto:davinci-linux-open-source-boun...@linux.davincidsp.com] On Behalf Of
Naveena M.
Sent: 28 February, 2009 1:16 PM
To: davinci-linux-open-source@linux.davincidsp.com
Subject: RE
Hi,
I guess re sizer is a kernel module. It might not have been built into the
kernel. You may have to load the kernel module.
With best regards,
Venkatachala Upadhya| Extn: 65395|
--
From: davinci-linux-open-source-boun...@linux.davincidsp.com
Hi,
Try using ffmpeg software on Windows PC or Linux PC.
With best regards,
Venkat.
--
From: davinci-linux-open-source-boun...@linux.davincidsp.com
[davinci-linux-open-source-boun...@linux.davincidsp.com] On Behalf Of
baxkstreet [baxkstr...@163.com]
Hello,
This is an error from the system when a particulat process hogs a lot of memory
and no more memory can be allocated to it.
This can happen either, a lot of memory is leaked in the program or program run
time meory requirement is very high so that the kernel can not allocate memory
any
Hi,
You can use the system call sigalarm(seconds) to do this. Install the sigalarm
handler.
Other option is to use nanosleep system command.
With best regards,
Venkat.
--
From: davinci-linux-open-source-boun...@linux.davincidsp.com
Greetings!,
I am trying to assign a static IP address to the DVEVM board through bootargs
and boot it; example
setenv bootargs mem=120M rw noinitrd root=/dev/hda1 ip=192.168.60.25
netmask=255.255.230.0 gw=192.168.65.1 ...
While board is booting, I see the same argument is passed as the kernel
Hello huangsw,
Thanks for this. It worked for me. I was thinking that I had to re-build the
kernel. I wanted to confirm the same.
With best regards,
Venkatachala Upadhya| Extn: 65395|
--
-Original Message-
From: 黄守旺 [mailto:huan...@temobi.com]
Sent: 19 January, 2009 2:15 PM
with out the help of ARM. This will improve the video presentation after
decoding. DSP needs the continuous memory allocation for its decoding. That is
the reason I believe that TI has developed fbdevsink.
With best regards,
Venkatachala Upadhya| Extn: 65395|
--
-Original Message-
From: Yusuf
HI,
This should be /dev/fb/3 for fbvieo sink instead of /dev/fb0
fbvideosink device=/dev/fb0
With best regards,
Venkatachala Upadhya| Extn: 65395|
--
-Original Message-
From: davinci-linux-open-source-boun...@linux.davincidsp.com
[mailto:davinci-linux-open-source-boun
Hi,
Your source of information is Linux kernel code for davinci 644x, if you care
to follow it.
With best regards,
Venkat.
--
From: davinci-linux-open-source-boun...@linux.davincidsp.com
[davinci-linux-open-source-boun...@linux.davincidsp.com] On
.
Hope this cue helps.
With best regards,
Venkat.
--
From: Sandeep Kumar [sande...@verismonetworks.com]
Sent: Wednesday, December 17, 2008 11:53 AM
To: Venkatachala Upadhya
Subject: RE: calling assembly from c and vice-versa
Hi Venkatachala Upadhya
Thanks
am not having any
trouble in building the binary for ARM/DSP for DM6446 EVM board.
My suggestion would be, double check the installation. If the installation is
successful, you have to update your path, so that the system can find
arm_v5t_le-gcc in its path.
With best regards,
Venkatachala
there was no 'ticking' but
read and write in an alternate fashion.
With best regards,
Venkat.
--
From: [EMAIL PROTECTED] [EMAIL PROTECTED] On Behalf Of Phil Quiney [EMAIL
PROTECTED]
Sent: Tuesday, December 02, 2008 9:25 PM
To: Venkatachala Upadhya
Cc
Hello all,
I am using DM6446 EVM board. Using DVSDK 1.20.00.10 version. Running gstreamer
on the board. I am trying to use the device /dev/dsp for both recoding and
playback simultaneously. I am un-able to do so after setting the device to
full-duplex mode using the ioctl call ioctl(soundFd,
With best regards,
Venkatachala Upadhya| Extn: 65395|
--
This message (including attachment if any) is confidential and may be
privileged. If you have received this message by mistake please notify the
sender by return e-mail and delete this message from your system. Any
unauthorized use
--gst-debug=GST_CAT=0:GST_ELEMENT_*=0,gdecoder:0,fbvideosink:0 udpsrc port=9000
! queue2 max-size-buffers=4294967295 ! gdecoder Codec=0 ! fbvideosink
device=/dev/fb/3
With best regards,
Venkatachala Upadhya| Extn: 65395|
--
This message (including attachment
to display the
graphics and to run x-windows.
we have configured the x-windows on DM6446 and our GTK application is working
as expected.
With best regards,
Venkatachala Upadhya| Extn: 65395|
--
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
With best regards,
Venkatachala Upadhya| Extn: 65395|
--
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Prashantha Gowda
Sent: 14 October, 2008 8:22 PM
To: davinci-linux-open-source@linux.davincidsp.com
Subject: Demo on DVEVM 6467 is not starting
Hi all
I have
Hello,
goal: Run gstreamer application using dvevm board.
I have built the gstreamer for davinci as per the instruction given in the URLs
http://focus.ti.com/dsp/docs/dspsplash.tsp?contentId=3100 and
http://www.z3technology.com/DaVinci%5FGStreamer/
When I run the test script test_MP3.sh, It
and re-build the kernel?
If any one has any one tried that option, please share it
With best regards,
Venkatachala Upadhya| Extn: 65395|
--
This message (including attachment if any) is confidential and may be
privileged. If you have received this message by mistake please notify the
sender
Hello,
Is frame buffer is supported in DM6467 TI EVM board?
I could not notice it in the boot messages. Is there an attempt by any one?
I have Montavista Demo 4.0.1 kernel and LSP corresponds to this.
With best regards,
Venkatachala Upadhya|Extn: 65395|
--
DISCLAIMER:
This message (including
pressed on the
terminal. Any one has the idea why this happens? Do I need to upgrade the
drivers?
With best regards,
Venkatachala Upadhya|Extn: 65395|
--
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: 08 August, 2008 2:05 PM
pty_master /dev/pty2 0-255 pty:master
unknown /dev/tty41-63 console
With best regards,
Venkatachala Upadhya|Extn: 65395|
--
This message (including attachment if any) is confidential and may be
privileged. If you have received this message by mistake
43 matches
Mail list logo