In which script u added commands ?
It is possible to to this with init script (rcS).
--- On Wed, 12/8/09, kirthika varadarajan kirthikai...@gmail.com wrote:
From: kirthika varadarajan kirthikai...@gmail.com
Subject: tiwlan wifi auto configuration
To: omkar savagaonkar omkar...@yahoo.co.in
there's nothing with libs.
Shell is bysybox stuff.
Also u should have proper inittab and rcS.
Regards,
Omkar
--- On Thu, 30/7/09, kirthika varadarajan kirthikai...@gmail.com wrote:
From: kirthika varadarajan kirthikai...@gmail.com
Subject: DM6446 file system(ramdisk) in NAND
To:
First check out whether your system is getting the interrupt and driver is
unable to handle.
U can do this by cat /proc/interrupts and cat /proc/stat.
--- On Wed, 8/7/09, Deepika Makhija deepika.makh...@einfochips.com wrote:
From: Deepika Makhija deepika.makh...@einfochips.com
Subject: No
We are working with Monta Vista Linux with TI-Davinci platform.
Previously we were using TI LSP release of 1.20 and now we have migrated to LSP
1.30.
After migration to 1.30 we are facing issue of NAND bad block erase.
From logs we can see almost all blocks are getting marked as bad blocks.
Then
Do U have previous log file?
Compare and then decide..
--- On Sun, 5/7/09, kirthika varadarajan kirthikai...@gmail.com wrote:
From: kirthika varadarajan kirthikai...@gmail.com
Subject: While Booting DM6446 hangs
To: Davinci-linux-open-source@linux.davincidsp.com
Few questions...
1. Have U built up your own H/w setup ?
2. What all other devices are using interrupts on GPIO pins ?
3. Is their any driver other than TIWLAN getting inserted at runtime which user
GPIO interrupts ?
4. If 3 is true then that driver might not be configuring GPIO interrupt
We are working with Monta Vista Linux with TI-Davinci platform.
Previously we were using TI LSP release of 1.20 and now we have migrated to LSP
1.30.
After migration to 1.30 we are facing issue of NAND bad block erase.
From logs we can see almost all blocks are getting marked as bad blocks.
Then