This patch separates out the controller reset logic, and makes this available
via mii_bus->reset.
Signed-off-by: Cyril Chemparathy <cy...@ti.com>
Signed-off-by: Michael Williamson <michael.william...@criticallink.com>
Signed-off-by: Caglar Akyuz <caglarak...@gmail.com>
---
drivers/net/davinci_mdio.c | 90 +++++++++++++++++++++++++------------------
1 files changed, 52 insertions(+), 38 deletions(-)
diff --git a/drivers/net/davinci_mdio.c b/drivers/net/davinci_mdio.c
index d34a53a..a9fbc26 100644
--- a/drivers/net/davinci_mdio.c
+++ b/drivers/net/davinci_mdio.c
@@ -85,6 +85,57 @@ struct davinci_mdio_data {
bool suspended;
};
+static void __davinci_mdio_reset(struct davinci_mdio_data *data)
+{
+ u32 mdio_in, div;
+
+ mdio_in = clk_get_rate(data->clk);
+ div = (mdio_in / data->pdata.bus_freq) - 1;
+ if (div > CONTROL_MAX_DIV)
+ div = CONTROL_MAX_DIV;
+
+ /* set enable and clock divider */
+ __raw_writel(div | CONTROL_ENABLE, &data->regs->control);
+}
+
+static int davinci_mdio_reset(struct mii_bus *bus)
+{
+ struct davinci_mdio_data *data = bus->priv;
+ u32 phy_mask, ver;
+
+ __davinci_mdio_reset(data);
+
+ /*
+ * wait for scan logic to settle:
+ * the scan time consists of (a) a large fixed component, and (b) a
+ * small component that varies with the mii bus frequency. These
+ * were estimated using measurements at 1.1 and 2.2 MHz on tnetv107x
+ * silicon. Since the effect of (b) was found to be largely
+ * negligible, we keep things simple here.
+ */
+ mdelay(1);
+
+ /* dump hardware version info */
+ ver = __raw_readl(&data->regs->version);
+ dev_info(data->dev, "davinci mdio revision %d.%d\n",
+ (ver >> 8) & 0xff, ver & 0xff);
+
+ /* get phy mask from the alive register */
+ phy_mask = __raw_readl(&data->regs->alive);
+ if (phy_mask) {
+ /* restrict mdio bus to live phys only */
+ dev_info(data->dev, "detected phy mask %x\n", ~phy_mask);
+ phy_mask = ~phy_mask;
+ } else {
+ /* desperately scan all phys */
+ dev_warn(data->dev, "no live phy, scanning all\n");
+ phy_mask = 0;
+ }
+ data->bus->phy_mask = phy_mask;
+
+ return 0;
+}
+
/* wait until hardware is ready for another user access */
static inline u32 wait_for_user_access(struct davinci_mdio_data *data)
{
@@ -163,7 +214,6 @@ static int __devinit davinci_mdio_probe(struct
platform_device *pdev)
struct device *dev = &pdev->dev;
struct davinci_mdio_data *data;
struct resource *res;
- u32 mdio_in_freq, mdio_out_freq, div, phy_mask, ver;
struct phy_device *phy;
int ret, addr;
@@ -185,6 +235,7 @@ static int __devinit davinci_mdio_probe(struct
platform_device *pdev)
data->bus->name = dev_name(dev);
data->bus->read = davinci_mdio_read,
data->bus->write = davinci_mdio_write,
+ data->bus->reset = davinci_mdio_reset,
data->bus->parent = dev;
data->bus->priv = data;
snprintf(data->bus->id, MII_BUS_ID_SIZE, "%x", pdev->id);
@@ -225,43 +276,6 @@ static int __devinit davinci_mdio_probe(struct
platform_device *pdev)
goto bail_out;
}
- mdio_in_freq = clk_get_rate(data->clk);
- div = (mdio_in_freq / data->pdata.bus_freq) - 1;
- if (div > CONTROL_MAX_DIV)
- div = CONTROL_MAX_DIV;
- mdio_out_freq = mdio_in_freq / (div + 1);
-
- /* set enable and clock divider */
- __raw_writel(div | CONTROL_ENABLE, &data->regs->control);
-
- /*
- * wait for scan logic to settle:
- * the scan time consists of (a) a large fixed component, and (b) a
- * small component that varies with the mii bus frequency. These
- * were estimated using measurements at 1.1 and 2.2 MHz on tnetv107x
- * silicon. Since the effect of (b) was found to be largely
- * negligible, we keep things simple here.
- */
- mdelay(1);
-
- /* dump hardware version info */
- ver = __raw_readl(&data->regs->version);
- dev_info(dev, "davinci mdio revision %d.%d\n",
- (ver >> 8) & 0xff, ver & 0xff);
-
- /* get phy mask from the alive register */
- phy_mask = __raw_readl(&data->regs->alive);
- if (phy_mask) {
- /* restrict mdio bus to live phys only */
- dev_info(dev, "detected phy mask %x\n", ~phy_mask);
- phy_mask = ~phy_mask;
- } else {
- /* desperately scan all phys */
- dev_warn(dev, "failed to detect live phys, scanning all\n");
- phy_mask = 0;
- }
- data->bus->phy_mask = phy_mask;
-
/* register the mii bus */
ret = mdiobus_register(data->bus);
if (ret)
--
1.7.0.4
_______________________________________________
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
