On Mon, Dec 07, 2009 at 16:30:14, Sergei Shtylyov wrote: > Hello. > > Chaithrika U S wrote: > > > Add cpufreq support for DaVinci I2C driver. > > Tested on DA850/OMAP-L138 EVM. For the purpose of testing, the patches > > which add cpufreq support [1] for this SoC are needed. > > > > [1]http://linux.davincidsp.com/pipermail/davinci-linux-open-source/ > > 2009-September/016118.html > > > > Signed-off-by: Chaithrika U S <chaithr...@ti.com> > > --- > > drivers/i2c/busses/i2c-davinci.c | 59 > > +++++++++++++++++++++++++++++++++++++- > > 1 files changed, 58 insertions(+), 1 deletions(-) > > > > diff --git a/drivers/i2c/busses/i2c-davinci.c > > b/drivers/i2c/busses/i2c-davinci.c > > index 5f0888d..0f41da4 100644 > > --- a/drivers/i2c/busses/i2c-davinci.c > > +++ b/drivers/i2c/busses/i2c-davinci.c > > [...] > > > @@ -508,6 +517,39 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void > > *dev_id) > > return count ? IRQ_HANDLED : IRQ_NONE; > > } > > > > +#ifdef CONFIG_CPU_FREQ > > +static int i2c_davinci_cpufreq_transition(struct notifier_block *nb, > > + unsigned long val, void *data) > > +{ > > + struct davinci_i2c_dev *dev; > > + > > + dev = container_of(nb, struct davinci_i2c_dev, freq_transition); > > + if (val == CPUFREQ_PRECHANGE) { > > + wait_for_completion(&dev->xfr_complete); > > + davinci_i2c_reset_ctrl(dev, 0); > > + } else if (val == CPUFREQ_POSTCHANGE) { > > + i2c_davinci_calc_clk_dividers(dev); > > + davinci_i2c_reset_ctrl(dev, 1); > > + } > > + > > + return 0; > > +} > > + > > +static inline int i2c_davinci_cpufreq_register(struct davinci_i2c_dev *dev) > > +{ > > + dev->freq_transition.notifier_call = i2c_davinci_cpufreq_transition; > > + > > + return cpufreq_register_notifier(&dev->freq_transition, > > + CPUFREQ_TRANSITION_NOTIFIER); > > +} > > + > > +static inline void i2c_davinci_cpufreq_deregister(struct davinci_i2c_dev > > *dev) > > +{ > > + cpufreq_unregister_notifier(&dev->freq_transition, > > + CPUFREQ_TRANSITION_NOTIFIER); > > +} > > +#endif > > + > > static struct i2c_algorithm i2c_davinci_algo = { > > .master_xfer = i2c_davinci_xfer, > > .functionality = i2c_davinci_func, > > @@ -547,6 +589,9 @@ static int davinci_i2c_probe(struct platform_device > > *pdev) > > } > > > > init_completion(&dev->cmd_complete); > > +#ifdef CONFIG_CPU_FREQ > > + init_completion(&dev->xfr_complete); > > +#endif > > dev->dev = get_device(&pdev->dev); > > dev->irq = irq->start; > > platform_set_drvdata(pdev, dev); > > @@ -567,6 +612,14 @@ static int davinci_i2c_probe(struct platform_device > > *pdev) > > goto err_unuse_clocks; > > } > > > > +#ifdef CONFIG_CPU_FREQ > > + r = i2c_davinci_cpufreq_register(dev); > > + if (r) { > > + dev_err(&pdev->dev, "failed to register cpufreq\n"); > > + goto err_free_irq; > > + } > > +#endif > > > > You should instead define this function as just returning 0 in the > #else branch above, so that #ifdef here can be avoided... > > > + > > adap = &dev->adapter; > > i2c_set_adapdata(adap, dev); > > adap->owner = THIS_MODULE; > > @@ -606,6 +659,10 @@ static int davinci_i2c_remove(struct platform_device > > *pdev) > > struct davinci_i2c_dev *dev = platform_get_drvdata(pdev); > > struct resource *mem; > > > > +#ifdef CONFIG_CPU_FREQ > > + i2c_davinci_cpufreq_deregister(dev); > > +#endif > > + > > > > Same comment here. #ifdef's in the function code are frowned upon.... >
OK.I will post an updated version of this patch series soon. Thanks and Regards, Chaithrika > WBR, Sergei > > _______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
