Hi,
The davinci boards should have /dev/fb/0 rather than /dev/fb0 - this is true
for DM355 DM6446. I do not have a DM6467 to check against but I would guess
it is the same.
Regards
Phil Q
Phil Quiney, Senior Software Engineer
Trinity Convergence
Cambridge Business Park
Cowley Road
on it.
Regards,
Naveena.
From: Phil Quiney [mailto:[EMAIL PROTECTED]
Sent: Monday, September 29, 2008 1:30 PM
To: Naveena M.; davinci-linux-open-source@linux.davincidsp.com
Subject: RE: OSD support in DM6467
Hi,
The davinci boards should have /dev/fb/0 rather
:[EMAIL PROTECTED]
Sent: 29 September 2008 09:07
To: Phil Quiney; davinci-linux-open-source@linux.davincidsp.com
Subject: RE: OSD support in DM6467
Hi,
There is no device like /dev/fb/0 or /dev/fb/0. We tested the demos
available with the DM6446 kit, it was working. It was also
: Monday, September 29, 2008 7:04 PM
To: Phil Quiney; Naveena M.;
davinci-linux-open-source@linux.davincidsp.com
Subject: RE: OSD support in DM6467
Hi,
As far as i know, dm6467 does not support FBDEV driver. It has only
video pipelines so it supports only V4L2 drivers. You will find
/dev
as the FBDEV layer, to
display frames.
Thanks,
Brijesh Jadav
From: Naveena M. [EMAIL PROTECTED]
Sent: Monday, September 29, 2008 8:43 AM
To: Jadav, Brijesh R; Phil Quiney;
davinci-linux-open-source@linux.davincidsp.com
Subject: RE: OSD support in DM6467
Hi,
Thank you. So