PROTECTED]; Diego
Dompe [EMAIL PROTECTED]
*Cc:* [EMAIL PROTECTED]
*Sent:* Thursday, March 27, 2008 10:17 AM
*Subject:* Re: RE: PAL and NTSC problem on dm355
you can resolve this problem as followed:
1,DM355 board has a switch used for PAL NTSC option.u-boot will check
the switch and transfer
: Thursday, March 27, 2008 5:43 AM
To: Jammy Dane
Cc: huahua5; Karicheri, Muralidharan; Diego Dompe; [EMAIL PROTECTED]
Subject: Re: RE: PAL and NTSC problem on dm355
Any advance about this thread?
I've tried to change height parameter from 480 (NTSC) to 576 (PAL) in main.c
but it doesn't work.
I
?
huahua5
2008-03-27
发件人: Jammy Dane
发送时间: 2008-03-27 12:08:45
收件人: huahua5; Karicheri, Muralidharan; Diego Dompe
抄送: [EMAIL PROTECTED]
主题: Re: RE: PAL and NTSC problem on dm355
1 to huahua5:
Can you give me the detail of modify
, Muralidharan
发送时间: 2008-03-27 03:27:23
收件人: Karicheri, Muralidharan; Jammy Dane; Diego Dompe
抄送: davinci-linux-open-source@linux.davincidsp.com
主题: RE: PAL and NTSC problem on dm355
I missed one information. Did you set the bootargs correctly ? The jumper
setting is read by the bootloader and is updated
To: Karicheri, Muralidharan ; Karicheri, Muralidharan ; Jammy Dane ; Diego
Dompe
Cc: [EMAIL PROTECTED]
Sent: Thursday, March 27, 2008 10:17 AM
Subject: Re: RE: PAL and NTSC problem on dm355
you can resolve this problem as followed:
1,DM355 board has a switch used for PAL NTSC option.u
Dane
发送时间: 2008-03-27 12:08:45
收件人: huahua5; Karicheri, Muralidharan; Diego Dompe
抄送: [EMAIL PROTECTED]
主题: Re: RE: PAL and NTSC problem on dm355
1 to huahua5:
Can you give me the detail of modify the framebuffer driver to support
run-time switch between NTSC and PAL.?
2 to all
i have tried