Hello,
first thank you for your support.
Select the Release DSP menu item from the CCS GEL menu.
Then I got on the arm side the following error:
[EMAIL PROTECTED]:/home# ./app.out
App- Application started.
@0x000d5124:[T:0x40946b60] OP - Process_create_d Loading and starting DSP serve
r
Hi Kashin,
I will send you the example files shortly.
Cheers,
Valentina
kashin Lin [EMAIL PROTECTED] wrote: Hi Valentina,
i am interested in this. do you show the detail steps or how can i get the
example to try?
thanks!
best,
kashin lin
2008/1/28, Valentina Ivanovic [EMAIL PROTECTED]:
Am Thu, 31 Jan 2008 04:18:47 -0800 (PST) schrieb Valentina Ivanovic:
I will send you the example files shortly.
please add me.
Robert ([EMAIL PROTECTED])
--
___
Davinci-linux-open-source mailing list
Davinci-linux-open-source@linux.davincidsp.com
Hi,
I'm sending you the example file that contains dvevm_1_10 examples (almost no
difference with original one). It also contains some other tools (devmem2,
etc).
I didn't clean the directories, so everything is already compiled. If you want
to recompile the examples on your host, please
Hi,
I promised I will get back with some explanation.
When you start CCS 3.3 open existing project (lala.pjt in examples/lala).
You should set up the files like on the attached image. All necessary files are
in the zipped file that I sent you before.
Basically, you should follow the steps like
Hi Valentina,
i am interested in this. do you show the detail steps or how can i get the
example to try?
thanks!
best,
kashin lin
2008/1/28, Valentina Ivanovic [EMAIL PROTECTED]:
Hi Robert,
Yes it is possible to do so.
I've modified one TI example in order to be able to debug the DSP in
AM
To: Valentina Ivanovic
Cc: davinci-linux-open-source@linux.davincidsp.com
Subject: Re: booting linux AND accessing DSP
Hi Valentina,
i am interested in this. do you show the detail steps or how can
i get the example to try
Hi Robert,
Yes it is possible to do so.
I've modified one TI example in order to be able to debug the DSP in CCS. After
device has successfully booted (linux), the application is started, and then
the JTAG and CCS are used to connect to the DSP.
If you have any further problems or questions,
Hi Robert,
This page may help if you are debugging a Codec-Engine-based
application:
http://wiki.davincidsp.com/index.php?title=Debugging_the_DSP_side_of_a_C
E_application_on_DaVinci_using_CCS
Best regards,
Vincent
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On