-
From: Frank Xue [mailto:[EMAIL PROTECTED]
Sent: Monday, May 26, 2008 2:55 PM
To: [EMAIL PROTECTED]
Subject: Re: how to boot from jffs2 filesystem in nand
Hi, Rajesh
This article explain how to put JFFS2 Image to Flash when kernel is running.
http://wiki.davincidsp.com/index.php?title
@linux.davincidsp.com
Subject: FW: how to boot from jffs2 filesystem in nand
Hi Frank
Thank you very much for your help
Now i have loaded the filesystem into flash and kernel into flash
observations:
case1 :
filesystem is from nand flash and uImage from tftp
i.e. [ bootargs
hi Wu, Ruiyu
I think this wiki page will guide you to do it:
http://wiki.davincidsp.com/index.php?title=Put_JFFS2_Image_to_Flash
ERROR Verifying Checksum ... Bad Data CRC
please verify whether kernel size exceed flash partition size.
I'm successful in booting from jffs2 filesystem on NAND.
hi Wu, Ruiyu
i am also facing the same problem as you explained in
http://linux.omap.com/pipermail/davinci-linux-open-source/2007-September/004
113.html
can you please tell me how to resolve this problem
the bootlog is shown below
//
Booting PSP Boot
hi,all
now I want to boot from nand and using jffs2 filesystem , replace
network filesystem. I use the davinci dvevm for this test.
I have done some work for this design, they are :
Part I-- make kernel
1.1 add nand partion
static struct mtd_partition nand_partitions[] = {
/*
