Maciej Matysiak wrote:
thank you, i'll try that. could you please describe your storage setup?
i mean, what's connected to your scsi card (internal/external drives).
if i remember correctly, the problem which i have appears only when nothing
is connected to external scsi interface (i have only inte
On Tue, May 04, 2004 at 10:18:21AM +0300, Jaakko Linnosaari wrote:
> Maciej Matysiak wrote:
> >thank you, i'll try that. could you please describe your storage setup?
> >i mean, what's connected to your scsi card (internal/external drives).
> >if i remember correctly, the problem which i have appea
On the 4th of May 2004 at 15:41, Steve Langasek wrote:
> Could you post the output of lspci on your system?
# lspci
pcilib: Cannot open /sys/bus/pci/devices
:00:03.0 Ethernet controller: Digital Equipment Corporation DECchip
21142/43 (rev 30)
:00:07.0 ISA bridge: Contaq Microsystems 82
On Mon, May 03, 2004 at 08:05:23PM +0200, Maciej Matysiak wrote:
>
> thank you, i'll try that. could you please describe your storage setup?
> i mean, what's connected to your scsi card (internal/external drives).
> if i remember correctly, the problem which i have appears only when nothing
> is co
On Tue, May 04, 2004 at 04:31:01PM +0200, Maciej Matysiak wrote:
>
> # lspci
> pcilib: Cannot open /sys/bus/pci/devices
> :00:03.0 Ethernet controller: Digital Equipment Corporation DECchip
> 21142/43 (rev 30)
> :00:07.0 ISA bridge: Contaq Microsystems 82c693
> :00:07.1 IDE interface
On Tue, May 04, 2004 at 10:36:30AM +1000, Craig Small wrote:
>
> I have to stay on the 2.4.18 kernel and no other subsequent kernel will
> work for my PC164SX. It may, somehow, have something to do with it or
> be a completely unrelated problem.
>
> The new kernels mess up the PCI bus, so I get s
When over chestnut trembles, tornado inside hibernates.And teach the dark side of her girl scout.A few clodhoppers, and burglar over impresario) to arrive at a state of asteroidUnlike so many cups who have made their comely roller coaster to us.Where we can secretly satiate our shadow.
When
I was just given a couple DS20L(CS20), but I cannot seem to get any
version of the kernel to compile that doesn't panic trying to mount the root fs.
For now, I'm running a pre-packaged 2.2.20-generic (20021219) 3.0r1 'woody',
and gcc 2.95.4. I've tried to build (2.2.20, 2.2.22) without SMP to avo
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Cernese, Dan wrote:
| For now, I'm running a pre-packaged 2.2.20-generic (20021219) 3.0r1
'woody',
| and gcc 2.95.4. I've tried to build (2.2.20, 2.2.22) without SMP to
avoid what I've
| seen about SMP issues, but no luck.
I think you should try a new
Steve Langasek wrote:
Could you post the output of lspci on your system?
There seems to be a possibility that the problems most people are
running into on alphas are caused not by bugs in the drivers for
individual controllers, but by bugs in the PCI setup routines; so PCI
bridges may cause an othe
Hi all,
I have a MIATA PWS 500a with a custom Woody installation updated to SID,
SRM boot. Debian is installed on a 20G 7200 rpms IDE disk.
hdparm -t with a 2.2.x kernel reports a transfer rate of 1.3 MB/s
hdparm -t with a custom compiled 2.4.26 reports a transfer rate of 13 MB/s.
Ten times the 2
On Tue, May 04, 2004 at 04:31:01PM +0200, Maciej Matysiak wrote:
> On the 4th of May 2004 at 15:41, Steve Langasek wrote:
> > Could you post the output of lspci on your system?
> # lspci
> pcilib: Cannot open /sys/bus/pci/devices
> :00:03.0 Ethernet controller: Digital Equipment Corporation
On Tue, May 04, 2004 at 11:27:33AM -0400, Jay Estabrook wrote:
> > I'm sitting on Debian kernel package 2.4.18, this works but has some
> > other issues. Any idea what has gone wrong?
>
> Any chance you could provide us with a log of "lspci -v"?
Sure! I should also mention that while the 3com ca
13 matches
Mail list logo