I have a pair of DEC Personal Workstation 433au that I no longer
use. They are free to anyone who wants to pick them up from
Pittsburgh, PA.
The one I was using most recently has 1GB RAM and a decent
graphics card. For a while, newer versions of Xorg didn't work on
it. I'm not sure if that's been
On Thu, 25 Feb 2010, Bob Tracy wrote:
debian-alpha). To make a long story short, I had reason to try and
replace the existing CD-ROM drive with a CD-RW burner, and the Alpha
refused to boot. I couldn't even get the power-up diagnostics to run.
I put the original CD-ROM drive back in the
On Thu, 25 Jun 2009, Nael AL_Sheakh Ameen wrote:
Greetings!
i have AlphaServer Ds10 system and i want to install Debian on it.
Could you please send me the direct link website of the proper debian-iso
file.
Weird, the links on http://www.debian.org/CD/http-ftp/#stable seem to be
broken
Hmm, I think I had an Elsa Gloria once. IIRC it has a fancy 3D chip, and a
more mundane chip for 2D acceleration. The 3D chip wasn't supported by
XF86, but the 2D one was, which is probably how it was working in CentOS.
I think it was either a Trident or Cirrus Logic chip. lspci should tell
On Fri, 30 May 2008, Steve Langasek wrote:
On Tue, May 27, 2008 at 01:18:52PM -0600, dann frazier wrote:
I agree, and ideally the boot block would be written out with every
update of aboot. I don't feel comfortable making such a large
behavior change in etch, but I think it'd be great to see
On Tue, 18 Mar 2008, O-Zone wrote:
Hi all,
i'm trying to install debian on an ES40 Alpha System. My problem is that i
cannot see scsi disks: the SCSI controller is a SYM53C895 and it loads
correctly BUT i cannot see any disk attached on it !!!
Anyone can help me ? Thanks, Michele
How many
On Mon, 21 Jan 2008, socraxko, tomaxko's evil personality wrote:
I've managed to boot over the network and begin the install process,
however when i get to the Partition disks screen it only shows One disk, a
scsi seagate of 2Gb (QLogic qla1280 controller)..
and i can't view my raid5 (DAC960
On Wed, 16 Jan 2008, socraxko, tomaxko's evil personality wrote:
i want to use some old as800 and want to install linux on it, i've only
tried with debian etch until now, i know that centos, *BSD and alpha core
are also available, but i want to stick with debian.
this is my first time
On Wed, 16 Jan 2008, mel kravitz wrote:
Try lenny or testing disk 1, i just booted and installed testing on a Titan
-ES45, out of the box everything worked. On another note building a custom
linux-2.26.23-12 kernel builds fine and boots but xinit fails with 'No
/dev/fb0' support, this of course
looked through /var/log/Xorg.0.log and compared it
to what you get when it does work?
Ivan
On Jan 16, 2008 2:49 PM, Ivan Jager [EMAIL PROTECTED] wrote:
On Wed, 16 Jan 2008, mel kravitz wrote:
Try lenny or testing disk 1, i just booted and installed testing on a
Titan
-ES45, out of the box
On Fri, 11 May 2007, sauron wrote:
Listeros tengo un AlphaServer 800 5/333 con debian 4 etch, funciona
perfectamente pero cuando trato de instalarle mysql-server me reporta los
siguiente errores:
mysqld(2337): unaligned trap at 000120570f7c: 0001208b5dda 28 1
mysqld(2337): unaligned
When starting postfix-2.4.0-2, I'm having the same problem as Christoph in
#417530, except this is on some 2.6 kernels with CONFIG_EPOLL=y.
This seems to be alpha specific. So far I've tested on two alphas where
2.4.0-2 doesn't work and one hppa where it does work. One of the alphas
was
On Tue, 7 Nov 2006, Falk Hueffner wrote:
Steve Langasek [EMAIL PROTECTED] writes:
Given that you mention you're not running a Debian kernel at all
right now, and that this code is in place upstream and nobody else
seems to have complained loudly enough to get it fixed, I'm not sure
how much
On Mon, 6 Nov 2006, Falk Hueffner wrote:
Steve Langasek [EMAIL PROTECTED] writes:
On Sun, Nov 05, 2006 at 01:56:28PM +0100, maximilian attems wrote:
{standard input}:372: Error: macro requires $at register while noat in effect
make[5]: *** [arch/alpha/kernel/core_cia.o] Error 1
make[4]: ***
On Tue, 3 Oct 2006, Ivan Jager wrote:
On Mon, 2 Oct 2006, Grant Grundler wrote:
On Sun, Oct 01, 2006 at 02:15:42AM -0400, Ivan Jager wrote:
...
Then it will start cycling between:
FLT 500B SYS BD bus timeout
FLT CB74 SYS BD bad os HPMC cksm
FLT CBFC SYS BD OS HPMC br err
FLT CBF0 SYS BD HPMC
On Mon, 2 Oct 2006, Grant Grundler wrote:
On Sun, Oct 01, 2006 at 02:15:42AM -0400, Ivan Jager wrote:
...
Then it will start cycling between:
FLT 500B SYS BD bus timeout
FLT CB74 SYS BD bad os HPMC cksm
FLT CBFC SYS BD OS HPMC br err
FLT CBF0 SYS BD HPMC initiated
To paraphrase, the chassis
On Mon, 25 Sep 2006, Bob Tracy wrote:
Bob Tracy wrote:
Tomorrow I'll try yanking the ATI card and putting the old TGA2 back in,
just to see if Xorg 7.1 will work with the hardware that worked back in
the 6.8 days.
The good (I think) news is that the TGA2 works fine with the latest
Xorg 7.1
On Thu, 13 Jul 2006, Steve Langasek wrote:
Likewise, if the X problems are believed to be fixed in Xorg 7.1, it would
be a good idea to actually test this and report to debian-x precisely what
does or doesn't work in 7.1 vs. 7.0, including as much specifics as possible
about the particular bit
I had wanted to port it to Alpha as a course project, but my teacher
convinced us that I would be the only one using it.
AFAIK no one has ported it.
Ivan
On Thu, 27 Oct 2005, Rafael Ruiz wrote:
Hi all!
Anybody knows if i can to use OpenMosix for Alpha?
I have five node cluster with 21164 at
Oops, I meant a 9250...
On Mon, 13 Jun 2005, Jay Estabrook wrote:
On Mon, Jun 13, 2005 at 07:19:05PM -0400, Ivan Jager wrote:
I have a DPWS 433au. I Currently have a Millenium 2 card in it, but I'd
like to something with DRI support. I know these boxen are rather picky
about graphics cards
Hi,
I have a DPWS 433au. I Currently have a Millenium 2 card in it, but I'd
like to something with DRI support. I know these boxen are rather picky
about graphics cards. (Some don't work in SRM at all, others only in the
32 bit slots, and some work in all slots.)
Has anyone tried a Radeon
21 matches
Mail list logo