Thanks a lot for providing these ISOs Helge!!
Maybe it happened by coincidence, but a week ago I revived a long broken
XP1000 with a new/old CPU board.
So this machine is ready to do some experiments. There is just a 3DLabs
Oxygen VX1 adapter in it so far, everything else standard.
Installation w
Hi,
I'm the happy owner of the decommissioned former "goedel.debian.org"
DS20E build server. (Thanks Thimo again for the easy and close
handover of that beast!)
This machine has done a good job in the past years and I would like to
revive it and let it do some work again. I've already spent her a
On Dec 6, 1:10 am, Ian Las <[EMAIL PROTECTED]> wrote:
> Yes, I tried the de4x5 driver - de4x3 was a misspelling.Did some more tests
> and found strange behaviour :
>
> If the network cable is unplugged at startup it is possible to establish a
> working connection with the de4x5 driver but only at
On Nov 19, 1:10 am, Ian Las <[EMAIL PROTECTED]> wrote:
> Hi,In the past I tried to install the embedded DIGITAL 21143
> Ethernetcontroller
> of my UX 164 Alpha without any success.
> At the moment Debian etch is installed.
> Recently I got an old Intel Box with an DIGITAL 21140 PCI Ethernetcontrol
Hello,
I'm still running Sarge on a AS300 4/266 with a self-built 2.4.32
kernel from pristine sources in a software RAID1 configuration. I
thought it's about time to use a 2.6.x kernel and upgrade to Etch. My
first attempts to do this date back to when 2.6.21 was Latest, so I'm
still trying with t
>Yes and yes :) I compiled it on the PWS and on x86 and it looked the
>same. Unfortunately I don't know how to remedy your problem.
Neither do I - maybe upgrade my test 500au with "the right" Sid
packages, whatever they are...
Urs
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
>I complied and run them on PWS600au with a Radeon 9250 and they look
>normal compared to my x86 box.
So e.g. the "Pulsar model" is really blue like on the sample picture?
Funny, with my Sarge installation, the thing has all colors but no blue
at all. But you run Sid on your PWS - or not?
Urs
-
Coming back to the screwed consoles:
Kernel 2.6.14.3 with DRI on a DPW600au with 3dfx 4500 shows the same
nasty effects as all the other kernels I've tried so far.
Talking about Problem no.2:
As an OpenGL newby, I've tried the sample programs from
http://astronomy.swin.edu.au/~pbourke/opengl/power
I have spent some more time with that setpci on the DPW600au.
All cards in my system have this flag on by default - except the 3dfx -
and I can clear and set this flag and others wherever I like - except
on the 3dfx. Swapping the card into other slots doesn't help.
If nobody has ever seen a runni
Hi Falco,
> I didn't do anything in particular to activate it. If it's of any help
> to you I can send you my kernel .config and/or xorg.conf.
I would expect that setpci it somewhere executed in a boot script
before (or after?) the X server ist started. Is there really nothing in
your scripts?
I
Hi Falko,
> I didn't do anything in particular to activate it. If it's of any help
> to you I can send you my kernel .config and/or xorg.conf.
I would expect that setpci is run somewhere before X starts (or maybe
after). Is there really nothing in the boot scripts?
If you can provide your 2.6.x
>0087 means, busmaster is activated, then?
according to
http://dri.sourceforge.net/doc/DRIuserguide.html
I would say yes.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Can you tell me how you enable bus mastering for your graphics card and
host bridge? I must be doing something wrong with the setpci command.
cheers
Urs
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hello all,
I am struggling to make DRI work on a DPW600au with a 3dfx Voodoo 4500
under Sarge. Kernel is 2.4.29.
Problem No.1:
When I enable DRI, all virtual consoles turn to a mix of white dots
scattered randomly all over the screen - I can still type but can't
read a thing...
Problem No.2:
I h
14 matches
Mail list logo
