the same error, booting from cd is ok, but when recognizing
> hardware it can´t find the cd-rom for install.
> has anyone installed debian on a AS800 before?
>
> On 1/16/08, mel kravitz <[EMAIL PROTECTED]> wrote:
> >
> > Try lenny or testing disk 1, i just booted and i
On Jan 16, 2008 5:55 PM, Ivan Jager <[EMAIL PROTECTED]> wrote:
> On Wed, 16 Jan 2008, mel kravitz wrote:
> > Hi,
> > First-thanks for your reply.
> > 1)When i boot with stock kernel 2.6.22-3-alpha-smp ,i go ->into
> X-session
> > (gnome-session, gdm is inst
in xorg.conf
4)In kernel .config file i have all the graphics options enabled that i
normally would need.
5) there is no /dev/fb0, #ls -l /dev/fb0 -> /dev/null on my box?
Best -Mel
On Jan 16, 2008 2:49 PM, Ivan Jager <[EMAIL PROTECTED]> wrote:
> On Wed, 16 Jan 2008, mel kravitz w
Try lenny or testing disk 1, i just booted and installed testing on a Titan
-ES45, out of the box everything worked. On another note building a custom
linux-2.26.23-12 kernel builds fine and boots but xinit fails with 'No
/dev/fb0' support, this of course is xorg. All graphics/ fbdev kernel
options
Try adding a PCI->USB port card to the PCI bus, then ATMEL driver
AT76C503A cards will work, you will need to compile the driver
from http://at76c503a.berlios.de , cards are :
http://at76c503a.berlios.de/devices.html
mel
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscr
Hi,
I have an AS800, 500MHZ box with (3) 9.1GB HD ready for pickup only in
the Long Island NY. area.
Contactact me for directions by e-mail.
Mel
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Thanks Jay, that works.
-Mel
On Mon, May 02, 2005 at 10:50:10AM -0400, mel kravitz wrote:
>
> Anyone building kernels succesfully after linux-2.6.10?.. 2.6.11.8
> failes 'make boot' with:
>
> LD .tmp_vmlinux1
> kernel/built-in.o(.spinlock.text+0x58)
Hi,
Anyone building kernels succesfully after linux-2.6.10?.. 2.6.11.8
failes 'make boot' with:
LD .tmp_vmlinux1
kernel/built-in.o(.spinlock.text+0x58): In function `_read_trylock':
: undefined reference to `_raw_read_trylock'
kernel/built-in.o(.spinlock.text+0x64): In function `_read_trylo
l
Grzegorz B. Prokopski wrote:
On Wed, 2005-06-04 at 15:52 -0400, mel kravitz wrote:
hi,
The http://sablevm.org/wiki/Tomcat is not waiting any more:-)
I hope this helps others running on alpha and other arch's.
Hi Mel,
Thank you very much for the screenshots, temporarily (before I p
hi,
The http://sablevm.org/wiki/Tomcat is not waiting any more:-)
I hope this helps others running on alpha and other arch's.
-Mel
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
--- Begin Message ---
Hi,
alpha desktop using sablevm to get jakarta-tomcat-5.0.19 running:
http://www.caseydoodle.com/sablevm_tomcat.png
/I will add my how-to to TOMCAT wiki at sable.org this week.
Best -Mel
/
___
SableVM-user mailing list
[EMAIL PROTEC
Hi, and thanks!
I reviewed in detail what i have and recompiled sablevm-1.11.3, with
.configure --with-threading=direct ,my java -V:
casey99:/home/mel# java -V
SableVM version 1.11.3
- compile date and time: 2005-03-31 19:12:02 UTC
- gcc version: 3.3.5 (Debian 1:3.3.5-8)
- 'real life brokenness' f
No need to backport libc as mentioned in your original reference since
this *bug
is fixed in debian-unstable:
http://lists.debian.org/debian-glibc/2004/04/msg00344.html
bug is fixed, indeed it is so.
-mel
mel kravitz wrote:
Hi Adrian,
I installed kaffe-1.1.4 configured with '--with-
Hi Adrian,
I installed kaffe-1.1.4 configured with '--with-jikes', tried cvs kaffe
-carefull here since ../lib/kjc.jar does
not install and is 'broken' at the moment?, see:
http://www.kaffe.org/pipermail/kaffe/2005-January/101231.html
-kjc.jar is not built as part of cvs 'kaffe' at least not for
Hi All,
I have been succesful getting jakarta-tomcat-4.1.30 running on my
debian unstable 2.6.10 SMP DS20 box, with a combinaton of inputs from
Etienne Gagnon: http://sablevm.org/lists/sablevm-user/2005-March/000225.html
and much help from Dalibor Topic of the kaffe.org project.
1) compiled cvs kaf
Thanks Adrian, for the detailed response, i will see what i can do with it.
Kaffe fails -> jre not sdk
Sablevm also fails, tomcat4 say the same thing 'jre not sdk'. there is
no 'kit' at ftp://ftp.tux.org/pub/java/
usable for 'alpha' older .tar.gz versions from 97-98 fail as well.
Best -Mel
>>On
FWI, kernel 2.6.10 runs very well on my DS20 -SMP box dmesg:
Linux version 2.6.10 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian
1:3.3.5-5)) #1 SMP Thu Jan 20 16:57:13 EST 2005
Booting on Tsunami variation Goldrush using machine vector DP264 from SRM
Major Options: SMP LEGACY_START VERBOSE_MCHECK
apt-get install aboot-0.9b then use swriteboot command or
get a copy of aboot-0.9b.tar.gz from sourceforge.net (google
aboot-0.9b.tar.gz)
as su # tar xzvf aboot-0.9b.tar.gz , cd aboot-0.9b
make (it may not complete) cd sdisklabel , make it will complete
use swriteboot command, read the README, for
I regularly build 2.4.2x kernels on several alpha boxes, 21164 as well
as 21264 CPU's, as well as SMP kernels, happy to see USB wireless
adapter code working in 2.4.26 and 2.4.27pre1, that is code builds from
cvs src from at57c503 project.( see enclosed dmesg).
What i do:
get linux-24.2x.tar.gz fr
ors..
I will check with HP SRM guys see what they say..report what i find.
-Mel
--
mel kravitz <[EMAIL PROTECTED]>
switching power inc
aboot is 0.9b latest available from:
https://sourceforge.net/projects/aboot/
-mel
--
mel kravitz <[EMAIL PROTECTED]>
switching power inc
I moved a disk with debian unstable running kernel 2.4.24 as well as
kernel 2.6.2 capable , built on a DS10. Both kernels fail to boot on the
DS15.
'no valid boot block message...' Both kernels boot fine on the DS10.
-Mel
Thank you that was it..
-Mel
Bob McElrath wrote:
apt-get install g++
Hi,
My system 164LX alpha, uname -a:
Linux casey229 2.4.23 #3 Mon Dec 15 19:47:46 EST 2003 alpha GNU/Linux,
testing /unstable ,
gcc -v gives:
Reading specs from /usr/lib/gcc-lib/alpha-linux/3.3.2/specsConfigured
with: ../src/configure -v
--enable-languages=c,c++,java,f77,pascal,objc,ada,treelang
Solved with downgrade of binutils to 2.14.90.0.6-3 (testing)
-Mel
>I see the same thing with gcc-3.2,gcc-3.3- binutils(..90.0.6-4) must be
>broken -unstable with 2.4.23pre7 src i get 'make boot'
>fails with:
>-o vmlinux
>ld: final link failed: bad value
--
mel
I see the same thing with gcc-3.2,gcc-3.3- binutils must be broken
-unstable with 2.4.23pre7 src i get 'make boot'
fails with:
-o vmlinux
ld: final link failed: bad value
for ref:
http://lists.debian.org/debian-alpha/2003/debian-alpha-200310/msg00051.html
--
mel kravitz <[EM
Hi,
evolution4.3.x installs along with mozilla1.3.x ,but do not start,
is there a 'missing lib' for alpha?
/etc/apt/sources.list:
deb
http://ftp.acc.umu.se/mirror/mirrors.evilgeniuses.org.uk/debian/backports/woody/
gnome2.2/
deb http://mirror.raw.no/ gnome2.2/
-Mel
This card is supported in xfree86-4.2.1 and up. I use it in Debian and
NetBSD on PWS boxes.e-mail me 'off' list for my /etc/X11/XF86Config
file. I run 4.2.1.
-Mel
If you have limited memory and machine is 21064 CPU,
then remove gdm or xdm with:
#apt-get remove gdm ( xdm)
login will now be 'text' mode allowing the use of:
$xinit -> select your widowmanager, icewm is great and
very thin, install with
#apt-get install icewm
$xinit, yields xterm, $icewm, start
Try,
http://www.netfilter.org/unreliable-guides/NAT-HOWTO/NAT-HOWTO.linuxdoc-4.html#ss4.1
masquerading works well for me 2.4.20 kernel, don't forget :
#echo 1 > /proc/sys/net/ipv4/ip_forward
or your gateway box will not forward packets from the internal network.
-Mel
Added an enable line to /usr/src/linux/arch/alpha/config.in
and 'make config' allows ieee1394 configure. This is in 2.4.20.
An Acom/Data Firewire HD.(40GB) is detected:(dmesg)
ohci1394: $Rev: 578 $ Ben Collins <[EMAIL PROTECTED]>
ohci1394_0: Unexpected PCI resource length of 1000!
ohci1394_0: OHCI-
Trying to find ieee1394 configuration in
kernel src 2.4.20 -latest stable with 'make xconfig or make config'
yields no section for ieee1394, even though /usr/src/linux/drivers
contents is present. Is ieee1394 supported on alpha? XP1000 with
add-on USB/ieee1394 Adaptec pci card.
-Mel
I think the PWS needs a 'special' supply. ATX will not work here
since motherboard power supply connectors are not compatable with
the ATX config. You can get a spare on-line from:
http://sparesstore.compaq.com/sparesstore
-Mel
Hi,
As long as SRM recognizes the pci video card and XFree86 version
you are using supports the card, you can run Xsessions.
For the PWS- matrox(MII,G200,G450), glint Permedia2,3[3D-labs, 4D20
etc], ATI cards up to the radeon 7500 are supported, not supported by
SRM on these boxes are Nvidia cards
On an XP1000, with 2.2.20 Generic or 2.4.20 Generic kernel
using command boot from SRM or aboot:
>>>boot dkb0 -fi 2/vmlinuz-2.4.20 -fl root=/dev/sda2
boot stops at:
PCI:probing PCI hardware.
SMC37c669 found @0x3f0
..
Do not use modules for scsi devices required to boot:
hard wire this support with (Y) in kernel config file.
I had the same'panic...' message until i did just that.
FWIW you do not need anthing more than SRM consle to boot new kernel:
for me on this DS10, with dka200 as the scsi device:
>>>boot dk
gcc-3.2 is part of the 'unstable' package dist.
I currently have gcc-2.95 installed, wish to build an smp kernel,
What is the /etc/apt/sources.list to apt-get install gcc-3.2?
-Mel
PWS cpu is socketed, can be easily replaced. there is an S1 dip switch
below which sets chip operation (frequency)- it is possible to overclock
a 600MHZ chip to 667MHZ but not recommended. However any 433MHZ chip can
be replaced with a 600MHZ chip, i do this all the time. S1 settings must
be adjust
ou
> > have (or setup the initrd) and SCSI disks?
> >
> > --rdp
> >
> > On 24 Feb 2003, mel kravitz wrote:
> >
> > > Joakim Roubert wisely said..
> > > > > gzip -9 vmlinux, cp vmlinux.gz /boot/vmlinuz-2.4.20
> > > >
&
That is it, replaced the scsi card with a
On Tue, 2003-02-25 at 15:08, Rich Payne wrote:
>
> Did you include support in your kernel for whichever SCSI controller you
> have (or setup the initrd) and SCSI disks?
>
> --rdp
>
> On 24 Feb 2003, mel kravitz wrote:
>
> &
and SCSI disks?
>
> --rdp
>
> On 24 Feb 2003, mel kravitz wrote:
>
> > Joakim Roubert wisely said..
> > > > gzip -9 vmlinux, cp vmlinux.gz /boot/vmlinuz-2.4.20
> > >
> > > Don't do this.
> > > Use the /usr/src/linux/arch/alp
Joakim Roubert wisely said..
> > gzip -9 vmlinux, cp vmlinux.gz /boot/vmlinuz-2.4.20
>
> Don't do this.
> Use the /usr/src/linux/arch/alpha/boot/vmlinux.gz instead.
> There are some specific things made when compressing the kernel, that
is
> already made during the kernel compile.
> Simply copy t
As usual,(DS10) i can not seem to install a usable kernel in linux.
What i did:
gcc 3.2,current kernel-'vmlinuz-2.2.20-generic'
1) got linux-2.4.20.tar.gz from kernel.org
2)tar xzvf linux-2.4.20.tar.gz in /usr/src, mv linux-2.4.20 linux
in /usr/src/linux:
3)make menuconfig
4)make dep
5) make
produ
Kernel 2.4.9-31, with compaq triple 'glint' vga, symbios scsi and
ethernet card to save pci riser space.
Added a pci-cardbus bridge pci-card Texas Inst 1410 bridge and Orinoco
wireless card. Installed pcmcia-cs-3.1-33 package, but i get 'unresolved
symbols messages 'on reboot for orinoco_cs.o .
Any
A few questions from a newbie..
1) kernel sources for smp (as4000), i have 2.2 installed-which kernel
version woul;d be stable?
apt-get -f install (kernel_source?)
2) Are there any .deb packages out there for a web browser?-communicator
or netscape?
-Mel
Thanks Paul, printing works fine now- is a hand tool.
Kernel compile question: kernel-source all i need? or will i be missing
.headers or .c compiler?
-Mel
--- Begin Message ---
Hi,
I installed 2.2 on a DEC 600au -second scsi disk, first has NetBSD1.5 ,
i have a fully operational
system, however i don't seem to have lpd in /sbin or /usr/sbin?
Something i did?
I assume the print daemon is installed as part of the 'base.tgz' binary?
How do i 'fix' this
47 matches
Mail list logo
