Hello list,
I own an A8N-SLI board. If I check its status with sensors I get the
following:
it8712-isa-0290
Adapter: ISA adapter
VCore 1: +1.54 V (min = +1.42 V, max = +1.57 V)
VCore 2: +0.00 V (min = +2.40 V, max = +2.61 V) ALARM
+3.3V: +6.62 V (min = +3.14 V, max = +3.46 V)
Hi I need the dpt-i2o modul to install.
What is the best way to install in this cause?
Thx
Ryven
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Javier Kohen wrote:
I understand Blackdown's JDK comes with the plug-in, but as far as I
know they haven't released a version 1.5 JDK yet. Meanwhile you can use
Blackdown's JDK 1.4.x, a 32-bit browser in a chroot, or help them
release :-)
I know but I need jdk 1.5 and I'm wondering why sun
El sb, 28-05-2005 a las 14:10 +0200, Alexander Fieroch escribi:
Javier Kohen wrote:
I understand Blackdown's JDK comes with the plug-in, but as far as I
know they haven't released a version 1.5 JDK yet. Meanwhile you can use
Blackdown's JDK 1.4.x, a 32-bit browser in a chroot, or help them
Javier Kohen [EMAIL PROTECTED] writes:
El sb, 28-05-2005 a las 14:10 +0200, Alexander Fieroch escribi:
Javier Kohen wrote:
I understand Blackdown's JDK comes with the plug-in, but as far as
I know they haven't released a version 1.5 JDK yet. Meanwhile you
can use Blackdown's JDK 1.4.x, a
John Belmonte wrote:
Kyuu Eturautti wrote:
I've had very good success with K8T800/K8M800 series motherboards, some
of them Micro-ATX as well. Check the archives, there was some discussion
in very late December 2004, subject Micro/FlexATX hardware for Athlon 64.
I haven't had any
On 5/28/05, Wolfgang Mader [EMAIL PROTECTED] wrote:
I own an A8N-SLI board. If I check its status with sensors I get the
following:
...
+3.3V: +6.62 V (min = +3.14 V, max = +3.46 V) ALARM
-12V: -4.90 V (min = -12.63 V, max = -11.41 V) ALARM
-5V: -13.64 V (min = -5.26
I noticed almost every single time I do an apt-get upgrade, bind9-host
gets upgraded.
Why is this?
Alex.
On Sat, May 28, 2005 at 07:15:11PM +0200, Alexandru Cabuz wrote:
I noticed almost every single time I do an apt-get upgrade, bind9-host
gets upgraded.
You probably have a bind9-host from before the move, and it was
rebuild resulting in a different md5sum. So apt is going to
reinstall it.
Hello:
Maybe this is old, but i am interested in knowing th port status related
to sarge.
I am avaliating the use of amd 64 machines in production servers, using
debian, offcourse.
For that i am interesting to know:
- if there will be security support for the sources changed by the
security
On 10303 March 1977, Luis Matos wrote:
For that i am interesting to know:
- if there will be security support for the sources changed by the
security team that already compile under amd64
- if manteiners are not receptive to patch their sources to compile
under amd64
- witch packages
Thank God, the server at stake now runs a Debian Sarge amd64 base system, rebooted successfully at the first
attempt (a very long minute of silence and then it came back -- ahh, sweet!!). Many thanks to the supportive
Debian community!
I provide here a log of the effort in case someone later
On Saturday 28 May 2005 09:44 am, Luis Matos wrote:
Hello:
Maybe this is old, but i am interested in knowing th port status
related to sarge.
I am avaliating the use of amd 64 machines in production servers,
using debian, offcourse.
For that i am interesting to know:
- if there will be
Today, on upgrading my gcc4 test system (deb
http://debian-ppc64.alioth.debian.org/gcc4 unstable main contrib
non-free) I noticed that there was a newer lilo package. Unfortunately,
it doesn't help with the original problem described on this list
earlier. Does it seem likely that this can/will
Kyuu Eturautti wrote:
I remember rebooting these several times during setup, but I haven't
touched them much since. I remember rebooting one of them a few times
while testing several kernel settings. As usual, ran into some problems
with cpufreq/powernow (only fery few systems have worked
Hello,
On Sat, May 28, 2005 at 01:25:45PM +0200, Wolfgang Mader wrote:
I own an A8N-SLI board. If I check its status with sensors I get the
following:
+3.3V: +6.62 V (min = +3.14 V, max = +3.46 V) ALARM
looks like a /2 modifier is missing
-12V: -4.90 V (min = -12.63 V, max
http://nsis.sourceforge.net/
NSIS is a great system for making installers. Not sure if this will
work for you but just in case the above link has all the info. GL.
On 5/27/05, Adam Majer [EMAIL PROTECTED] wrote:
Jacob Larsen wrote:
I think the msi installer system was supposed to do
17 matches
Mail list logo
