On Saturday 25 February 2006 07:56, Joost Kraaijeveld wrote:
Hi,
After installing Etch on my AMD64 machine I suddenly have an extra eth1
without actually having an NIC. I cannot activate it in the Network
settings applet but it is shown during boot and in the output of
ifconfig (without ip
Le 25.02.2006 15:56:05, Joost Kraaijeveld a écrit :
Hi,
After installing Etch on my AMD64 machine I suddenly have an extra
eth1
without actually having an NIC. I cannot activate it in the Network
settings applet but it is shown during boot and in the output of
ifconfig (without ip address).
I want to summarize an off list discussion between Georg Rehm, Len
Sorensen and myself on the above subject. We hope this helps someone else.
-Steve
Summary by Georg:
Several users experienced a problem with regard to 3ware's RAID
controllers of the 9500 series in AMD 64-based servers that
Le Dienstag 21 Februar 2006 19:00, Hans a écrit :
Hello folks,
I have a slight Problem with my new notebook (got it as guarantee exchange)
with an ATI graphics card and Turion processor.
Description:
The driver I choose was version 8.22.5 (from ATI). I built the packages
with .run
I would have thought with 2.6.15 it had a chance. 2.6.8 certainly won't
like the chipset in it.
I think that it should work, i've a similar chipset (if not the same), and
it works also with 2.6.8, recompiilng it.
Not sure why 2.6.12 in ubuntu would work and 2.6.15 in debian wouldn't.
hello
do you know any repository where i will try a amule version with
kademlia support?
razorback now isa closed :-( :o
my problem is that i use debian sarge, if i use sid i have no problem,
but i will use sarge because i am very satisfied of this version
thanks
Daniele
--
hello,
I have an ati radeon 64 ddr vivo agp, and I want to use the
video-out/video-in capabilities of the card. The gatos proyect only
supports i386... I've tried to compile it myself but I get many warnings
and ends in error 1.
Someone has a work arround? or any kind of solution not involving a
This is just for the record;
I got it to work with temporarily using a different network card.
The keyboard worked fine with 2.6.12 (from the netinst CD I used)
but the Intel 1000 NIC [Ethernet controller: Intel Corp.: Unknown device
109a (rev 01) ]
only started working when I used a newer
Hi,
When I open my Gnome Help files I get these strange chars: squares with
numbers like 20 (on the first line) and 02, 03,15 etc (on the second
line) in them. I assume that these are Unicode chars, not being
displayed properly.
How do I get those characters diplayed properly?
TIA
--
9 matches
Mail list logo
