Re: eth0: no link during initialization failure with Nvidia ethernet ports

Try bringing up eth1 instead. I too have a board with two nvidia nics (msi neo4) and sometimes the primary ends up as eth0 and other times eth1. Carrick John Schmidt wrote: Hi, I used Len Sorenson's install image -- sarge-amd64-2.6.12-netinst.iso on a Tyan S2895 Thunder K8WE board. This bo

Re: MSI K8N NEO PLATINUM

My MSI K8N Neo4 Platinum works fine with etch amd-64, so I presume that it should be fine with sarge. I found that I had to manually load the forcedeth module for the network driver during the install, although on rare occasions it would load it by itself. Additionally since it has two nics

Re: FW: bug #311856

Thanks for the reply, I actually just traced the problem to some bad memory. I'm happy to report that I've gotten everything installed. Thanks! Carrick Goswin von Brederlow wrote: Carrick Detweiler <[EMAIL PROTECTED]> writes: Hi, I submitted this install bug report, b

MSI K8N Neo4 Platinum

Has anyone installed onto an MSI K8N Neo4 Platinum mother board? I'm having problems (see bug #311856 for details) and am wondering if this is a hardware compatibility problem or faulty hardware. Any reports as to success or failure of debian-amd64 on this board would be much appreciated. Th

FW: bug #311856

Hi, I submitted this install bug report, but haven't heard anything back and figured that the amd64 crowd might be able to provide some insight. Has anyone had any luck installing on an MIS K8N Neo4 mobo? When I try installing it freezes when installing the kernel (kernel-image-2.6.8-11-amd