Hi I'm having problems with CardBus on my ASUS A2526KUH. The pc has 0000:02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac) 0000:02:01.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
but I can't have it work properly. Yenta_socket module loads correctly, #cardctl status Socket 1: 3.3V CardBus card function 0: [ready] seems ok, but lspci then doesn't show the connected card! I tried different cards, also an old 3com ethernet, nothing happens. I'm using custom 2.6.9 kernel, but I tried 2.6.10rc2 custom and 2.6.8 debian with the same result. The CardBus works, I tried it on Windows. But I know it works also because I tried Knoppix3.6 with 2.4 kernel and finally I managed to see the connected card in lspci (knoppix with 2.6 didn't work!!). It mustn't be a Debian-kernel's problem because Knoppix uses vanilla kernel. I'd like to know of any of you have the same Cardbus (or pc) and if it works. I've seen, googling around, that Ricoh bus is very commonnly used on laptops, so I can't figure out why I am the only one experiencing this problem. any help welcome thanks maxxer debian-amd64 (installed pretty fine...)