Am Donnerstag, 10. November 2005 16:13 schrieb dave:
> I just got a new system this week and was struggling to get it
> running when I finally came across this thread.
> I ran the install, shelled out when the install reported no disk, ran
> modprobe, exited to the install and the disk is now there
Thank you. Thank you. Thank you.
I just got a new system this week and was struggling to get it running when
I finally came across this thread.
After downloading the netiso from: http://tinyplanet.ca/~lsorense/amd64/
I ran the install, shelled out when the install reported no disk, ran
modprob
On Tue, Sep 06, 2005 at 08:28:50AM -0700, [EMAIL PROTECTED] wrote:
> Quoting Lennart Sorensen <[EMAIL PROTECTED]>:
>
> Sure thing, here it is:
>
> :00:00.0 0600: 8086:2770 (rev 02)
> :00:02.0 0300: 8086:2772 (rev 02)
> :00:1c.0 0604: 8086:27d0 (rev 01)
> :00:1c.1 0604: 8086:27d2 (
Quoting Lennart Sorensen <[EMAIL PROTECTED]>:
No problem. Can you tell me the lspci -n output on your machine now? I
will try and add it to the auto detect list sometime soon.
Sure thing, here it is:
:00:00.0 0600: 8086:2770 (rev 02)
:00:02.0 0300: 8086:2772 (rev 02)
:00:1c.0
On Fri, Sep 02, 2005 at 04:03:03PM -0700, [EMAIL PROTECTED] wrote:
> You are the man!!!
> I ran your custom iso 2.6.12 AMD64 Sarge and went to the second
> console. I didnt' see a sata_piix module, but I ran
> modprobe ata_piix
> I then went back to the installer console and re-detected hardware.
>
Hello,
Well, Lennart, you 're a savior :)
I just got ahold of a Dell PowerEdge 1800 with xeons and really wanted
to install a fully 64 bits compiled debian system on it.
The "official" netinst for amd64 comes with a 2.6.8 kernel, which works
really bad with dell's PERC4/Di SATA Raid controller
Quoting Lennart Sorensen <[EMAIL PROTECTED]>:
Hmm, yeah the ICH7 is rather new.
It is listed in sata_piix in 2.6.12, so perhaps doing 'modprobe
sata_piix' on console2 with the 2.6.12 install image would actually find
it in native mode. The discover data is not changed in my 2.6.12 image
so it
On Fri, Sep 02, 2005 at 12:44:11PM -0700, [EMAIL PROTECTED] wrote:
> Here's the output from lspci -n:
> :00:00.0 0600: 8086:2770 (rev 02)
> :00:02.0 0300: 8086:2772 (rev 02)
> :00:1b.0 0403: 8086:27d8 (rev 01)
> :00:1c.0 0604: 8086:27d0 (rev 01)
> :00:1c.1 0604: 8086:27d2 (rev 0
Quoting Lennart Sorensen <[EMAIL PROTECTED]>:
On Fri, Sep 02, 2005 at 11:53:49AM -0700, [EMAIL PROTECTED] wrote:
Thanks for the link, I tried the iso and it was the same as the others.
However, I went back into my BIOS and changed it so my SATA drives showed
up as IDE drives (Secondary Master,
On Fri, Sep 02, 2005 at 11:53:49AM -0700, [EMAIL PROTECTED] wrote:
> Thanks for the link, I tried the iso and it was the same as the others.
> However, I went back into my BIOS and changed it so my SATA drives showed
> up as IDE drives (Secondary Master, and Secondary Slave)
> My CD-RW is on the Pr
Quoting Lennart Sorensen <[EMAIL PROTECTED]>:
On Fri, Sep 02, 2005 at 08:20:58AM -0700, [EMAIL PROTECTED] wrote:
Just got a new GA-I8945GMF board with 2 x SATA II drives.
Using a Pentium 4 630 (EM64T)
I have the full AMD64 CD disc 1 installer, and its having trouble seeing
the drives.
I have co
On Fri, Sep 02, 2005 at 08:20:58AM -0700, [EMAIL PROTECTED] wrote:
> Just got a new GA-I8945GMF board with 2 x SATA II drives.
> Using a Pentium 4 630 (EM64T)
> I have the full AMD64 CD disc 1 installer, and its having trouble seeing
> the drives.
> I have configured the sata drives to exist outsid
Hi,
Just got a new GA-I8945GMF board with 2 x SATA II drives.
Using a Pentium 4 630 (EM64T)
I have the full AMD64 CD disc 1 installer, and its having trouble seeing
the drives.
I have configured the sata drives to exist outside the IDE Primary and
secondary controllers from the BIOS.
I'm not sur
13 matches
Mail list logo
