Re: Re: NSLU2 Debian Installer Erroneous asking for an IP address

A simple workaround for people having problem with this. Wait to plug-in the network cable until the slug finished booting. It will fail to get a dhcp address and will fallback to static ip. Greets On Jan 8, 2008 7:49 PM, Mike (mwester) <[EMAIL PROTECTED]> wrote: > So, basically even though the u

fan control on thecus n2100

Hi With kernel 2.6.23 the F75375 driver for the fan control was updated. AFAICS it should now support automatic fan control, but I did not suceeed in enableing it. Is there any documentation for the files in /sys/devices/platform/IOP3xx-I2C.0/i2c-adapter\:i2c-0/0-002e/ How can I set the fan spee

Upgrading kernel on a NSLU2

hi I have installed debian on my NSLU2 a while back... (June07 I guess) I am able to happily use apt-get upgrade to upgrade all but the kernel image. I am really worried on using apt-get to upgrade the kernel. Can somebody guide me on how to upgrade the kernel. More specifically the following a

Re: fan control on thecus n2100

* Gaudenz Steinlin <[EMAIL PROTECTED]> [2008-01-09 11:27]: > How can I set the fan speed manually now and how do I enable automatic > fan control (if possible)? I don't know which tools to use to control it automatically, but here are instructions for manual use: By default, the fan should run

Re: Upgrading kernel on a NSLU2

[EMAIL PROTECTED] wrote: hi I have installed debian on my NSLU2 a while back... (June07 I guess) I am able to happily use apt-get upgrade to upgrade all but the kernel image. I am really worried on using apt-get to upgrade the kernel. Can somebody guide me on how to upgrade the kernel. More

Re: fan control on thecus n2100

On Wed, Jan 09, 2008 at 11:27:22AM +0100, Gaudenz Steinlin wrote: > suceeed in enableing it. Is there any documentation for the files in > /sys/devices/platform/IOP3xx-I2C.0/i2c-adapter\:i2c-0/0-002e/ see: Documentation/hwmon/sysfs-interface > How can I set the fan speed manually now and how do

Re: Thecus N2100 - problems after flashing

* Salvatore Iovene <[EMAIL PROTECTED]> [2008-01-09 09:31]: > Hi, and thanks for the answer. After all everything turned out to be > fine. It seems that the Thecus leased a DHCP address after all, and I > just insisted on probin 192.168.1.100. :) This is documented: "If you have used a static confi

Re: Thecus N2100 - problems after flashing

On Wed, Jan 09, 2008 at 06:10:18PM +0100, Martin Michlmayr wrote: > * Salvatore Iovene <[EMAIL PROTECTED]> [2008-01-09 09:31]: > > Hi, and thanks for the answer. After all everything turned out to be > > fine. It seems that the Thecus leased a DHCP address after all, and I > > just insisted on prob

Re: Upgrading kernel on a NSLU2

* [EMAIL PROTECTED] <[EMAIL PROTECTED]> [2008-01-09 06:37]: > If I do a apt-get upgrade how does the proprietary IXP4xx microcode get > included ? The IXP4xx microcode is stored in /lib/firmware and will still be there when you upgrade the kernel. > 2. I know that linux-image-2.6-ixp4xx (2.6.18

Re: Upgrading kernel on a NSLU2

[EMAIL PROTECTED] wrote: I am really worried on using apt-get to upgrade the kernel. Can somebody guide me on how to upgrade the kernel. More specifically the following are my concerns. (I am referring to Installing Debian on the Linksys NSLU2 g

Re: fan control on thecus n2100

Martin Michlmayr wrote: * Gaudenz Steinlin <[EMAIL PROTECTED]> [2008-01-09 11:27]: How can I set the fan speed manually now and how do I enable automatic fan control (if possible)? I don't know which tools to use to control it automatically, but here are instructions for manual use:

Re: armel packages for linux-2.6.23-2 and install problem

Figured it out finally. When you use RedBoot to create images loaded over the net, as well as the partition length, it sets the "load size" for the partitions as well, which do not (and cannot) get updated when new contents are written in from linux. Specifically, RedBoot> load -v -r -b 0x80 -

Packages that only match linux-gnu in configure

Hi, As pointed out by Lennert, there is a huge amount of configure scripts looking at *-*-linux-gnu) in kde packages. Fortunately, looking more closely, these appear mostly harmless - Ie they are only used to turn on some warnings. In other cases, these can cause failures to build, missing functio

Re: Upgrading kernel on a NSLU2

HI Martin, Thanks for the confirmation, the upgrade did work but with some tiny effort... see the log below I had to install the specific version by using linux-image =version_number... == myslug:~/kernel# apt-get clean myslug:~

building ipcld on debian/NSLU

hi I am trying to build the iplcd driver for the NSLU2 http://www.linuxha.com/athome/common/iplcd/iplc-driver.tgz This is for the "USB Insteon PowerLinc V2" I am looking for the kernel build library which is not installed with the linux-image package... myslug:~/smarthome/iplc/driv