Package: src:linux
Version: 5.10.19-1
Severity: normal
Tags: upstream sid bullseye
X-Debbugs-Cc: debian-arm@lists.debian.org
Control: forwarded -1 
http://lists.infradead.org/pipermail/linux-rpi-kernel/2021-March/008049.html

Dear Maintainer,

kmscube 0.0.0~git20210103-1 fails to start with the error message
on Raspberry Pi 4B:

failed to set mode: Invalid argument

kmscube works fine on linux-image-amd64 and Raspberry Pi OS kernel
with vc4.ko and v3d.ko loaded.
Debian kernel without vc4.ko does not have KMS support on RPi4B.

If this is an issue in kmscube, please feel free to reassign.
This has been reported to the upstream maintainer.

Best regards, Ryutaroh Matsumoto


-- Package-specific info:
** Version:
Linux version 5.10.0-4-rt-arm64 (debian-ker...@lists.debian.org) (gcc-10 
(Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 
SMP PREEMPT_RT Debian 5.10.19-1 (2021-03-02)

** Command line:
 dma.dmachans=0x37f5 bcm2709.boardrev=0xd03114 bcm2709.serial=0x488d2af3 
bcm2709.uart_clock=48000000 bcm2709.disk_led_gpio=42 
bcm2709.disk_led_active_low=0 smsc95xx.macaddr=DC:A6:32:BB:99:D9 
vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=tty0 
root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0 cma=256M@256M rootwait 
rootfstype=ext4 module_blacklist=vc4,btrfs

** Tainted: C (1024)
 * staging driver was loaded

** Kernel log:
[   15.434159] systemd[1]: Listening on udev Kernel Socket.
[   15.469512] systemd[1]: Mounting Huge Pages File System...
[   15.586142] systemd[1]: Mounting POSIX Message Queue File System...
[   15.693933] systemd[1]: Mounting Kernel Debug File System...
[   15.760955] systemd[1]: Mounting Kernel Trace File System...
[   15.824464] systemd[1]: Starting Restore / save the current clock...
[   15.887927] systemd[1]: Starting Set the console keyboard layout...
[   15.948674] systemd[1]: Starting Create list of static device nodes for the 
current kernel...
[   16.009118] systemd[1]: Starting Load Kernel Module configfs...
[   16.072408] systemd[1]: Starting Load Kernel Module drm...
[   16.136954] systemd[1]: Starting Load Kernel Module fuse...
[   16.186350] fuse: init (API version 7.32)
[   16.593944] systemd[1]: Condition check resulted in Set Up Additional Binary 
Formats being skipped.
[   16.594243] systemd[1]: Condition check resulted in File System Check on 
Root Device being skipped.
[   16.606377] systemd[1]: Starting Journal Service...
[   16.697713] systemd[1]: Starting Load Kernel Modules...
[   16.772886] systemd[1]: Starting Remount Root and Kernel File Systems...
[   16.826411] EXT4-fs (sda2): re-mounted. Opts: 
journal_async_commit,nobarrier,data=writeback,commit=3600
[   16.839276] systemd[1]: Starting Coldplug All udev Devices...
[   16.936206] systemd[1]: Mounted Huge Pages File System.
[   16.963282] systemd[1]: Mounted POSIX Message Queue File System.
[   16.991278] systemd[1]: Mounted Kernel Debug File System.
[   17.088051] systemd[1]: Started Journal Service.
[   17.499035] systemd-journald[259]: Received client request to flush runtime 
journal.
[   29.663856] vchiq: module is from the staging directory, the quality is 
unknown, you have been warned.
[   29.838127] iproc-rng200 fe104000.rng: hwrng registered
[   30.005996] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[   30.152450] Module vc4 is blacklisted
[   30.528213] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[   30.841068] snd_bcm2835: module is from the staging directory, the quality 
is unknown, you have been warned.
[   30.893324] cryptd: max_cpu_qlen set to 1000
[   30.905644] mc: Linux media interface: v0.10
[   30.931090] bcm2835_audio bcm2835_audio: card created with 8 channels
[   30.965046] cfg80211: Loading compiled-in X.509 certificates for regulatory 
database
[   30.965729] cfg80211: Loaded X.509 cert 'b...@debian.org: 
577e021cb980e0e820821ba7b54b4961b8b4fadf'
[   30.966251] cfg80211: Loaded X.509 cert 'romain.per...@gmail.com: 
3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[   30.966940] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   30.988506] platform regulatory.0: firmware: direct-loading firmware 
regulatory.db
[   30.993828] platform regulatory.0: firmware: direct-loading firmware 
regulatory.db.p7s
[   31.010109] videodev: Linux video capture interface: v2.00
[   31.089165] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio 
for chip BCM4345/6
[   31.099490] brcmfmac mmc0:0001:1: firmware: direct-loading firmware 
brcm/brcmfmac43455-sdio.bin
[   31.100616] brcmfmac mmc0:0001:1: firmware: direct-loading firmware 
brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt
[   31.106479] usbcore: registered new interface driver brcmfmac
[   31.197366] bcm2835_mmal_vchiq: module is from the staging directory, the 
quality is unknown, you have been warned.
[   31.222017] bcm2835_v4l2: module is from the staging directory, the quality 
is unknown, you have been warned.
[   31.241095] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio 
for chip BCM4345/6
[   31.241282] brcmfmac mmc0:0001:1: firmware: failed to load 
brcm/brcmfmac43455-sdio.clm_blob (-2)
[   31.241296] firmware_class: See https://wiki.debian.org/Firmware for 
information about missing firmware
[   31.241307] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available 
(err=-2), device may have limited channels available
[   31.241919] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar  1 
2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4
[   31.499539] Bluetooth: Core ver 2.22
[   31.499887] NET: Registered protocol family 31
[   31.499891] Bluetooth: HCI device and connection manager initialized
[   31.499911] Bluetooth: HCI socket layer initialized
[   31.499932] Bluetooth: L2CAP socket layer initialized
[   31.499962] Bluetooth: SCO socket layer initialized
[   31.712926] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   32.021562] Bluetooth: HCI UART driver ver 2.3
[   32.021578] Bluetooth: HCI UART protocol H4 registered
[   32.024574] Bluetooth: HCI UART protocol LL registered
[   32.024587] Bluetooth: HCI UART protocol ATH3K registered
[   32.027851] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   32.031175] Bluetooth: HCI UART protocol Intel registered
[   32.039801] Bluetooth: HCI UART protocol Broadcom registered
[   32.044041] Bluetooth: HCI UART protocol QCA registered
[   32.044056] Bluetooth: HCI UART protocol AG6XX registered
[   32.048878] Bluetooth: HCI UART protocol Marvell registered
[   32.064453] hci_uart_bcm serial0-0: supply vbat not found, using dummy 
regulator
[   32.072828] hci_uart_bcm serial0-0: supply vddio not found, using dummy 
regulator
[   32.195209] io scheduler kyber registered
[   32.205694] uart-pl011 fe201000.serial: no DMA platform data
[   32.447650] Bluetooth: hci0: BCM: chip id 107
[   32.448101] Bluetooth: hci0: BCM: features 0x2f
[   32.449773] Bluetooth: hci0: BCM4345C0
[   32.449799] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[   32.449931] bluetooth hci0: firmware: failed to load brcm/BCM4345C0.hcd (-2)
[   32.449982] bluetooth hci0: firmware: failed to load brcm/BCM.hcd (-2)
[   32.449990] Bluetooth: hci0: BCM: firmware Patch file not found, tried:
[   32.449993] Bluetooth: hci0: BCM: 'brcm/BCM4345C0.hcd'
[   32.449996] Bluetooth: hci0: BCM: 'brcm/BCM.hcd'
[   32.704128] Adding 10485736k swap on /dev/sda3.  Priority:-2 extents:1 
across:10485736k FS
[   35.012027] audit: type=1400 audit(1615596755.947:2): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="libreoffice-oopslash" 
pid=512 comm="apparmor_parser"
[   35.013144] audit: type=1400 audit(1615596755.947:3): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="libreoffice-senddoc" 
pid=510 comm="apparmor_parser"
[   35.013761] audit: type=1400 audit(1615596755.947:4): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" 
pid=509 comm="apparmor_parser"
[   35.040025] audit: type=1400 audit(1615596755.975:5): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="lsb_release" pid=514 
comm="apparmor_parser"
[   35.051005] audit: type=1400 audit(1615596755.983:6): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=515 
comm="apparmor_parser"
[   35.051051] audit: type=1400 audit(1615596755.983:7): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" 
pid=515 comm="apparmor_parser"
[   35.082434] audit: type=1400 audit(1615596756.015:8): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=516 
comm="apparmor_parser"
[   35.082487] audit: type=1400 audit(1615596756.015:9): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="man_filter" pid=516 
comm="apparmor_parser"
[   35.082500] audit: type=1400 audit(1615596756.015:10): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="man_groff" pid=516 
comm="apparmor_parser"
[   35.248879] audit: type=1400 audit(1615596756.183:11): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=508 
comm="apparmor_parser"
[   36.138633] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   36.138660] Bluetooth: BNEP filters: protocol multicast
[   36.138681] Bluetooth: BNEP socket layer initialized
[   36.177767] NET: Registered protocol family 38
[   36.936614] bcmgenet fd580000.ethernet: configuring instance for external 
RGMII (RX delay)
[   36.936939] bcmgenet fd580000.ethernet eth0: Link is Down
[   46.060424] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   52.385692] rfkill: input handler disabled

** Model information
Device Tree model: Raspberry Pi 4 Model B Rev 1.4

** Loaded modules:
algif_hash
algif_skcipher
af_alg
bnep
binfmt_misc
nls_ascii
nls_cp437
vfat
fat
kyber_iosched
hci_uart
btqca
btrtl
joydev
evdev
btbcm
sg
btintel
btsdio
bluetooth
jitterentropy_rng
bcm2835_v4l2(C)
aes_neon_bs
bcm2835_mmal_vchiq(C)
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
videobuf2_common
brcmfmac
brcmutil
videodev
aes_neon_blk
cfg80211
crypto_simd
mc
snd_bcm2835(C)
cryptd
drbg
aes_arm64
aes_generic
ansi_cprng
ecdh_generic
rfkill
ecc
libaes
snd_soc_core
snd_pcm_dmaengine
snd_pcm
bcm2835_wdt
snd_timer
bcm2711_thermal
iproc_rng200
pwm_bcm2835
snd
rng_core
soundcore
vchiq(C)
cec
drm_kms_helper
leds_gpio
cpufreq_dt
fuse
drm
configfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
blake2b_generic
xor
xor_neon
sd_mod
t10_pi
crc_t10dif
crct10dif_generic
raid6_pq
libcrc32c
crc32c_generic
hid_generic
usbhid
hid
uas
usb_storage
scsi_mod
vhost_net
tun
vhost
vhost_iotlb
tap
bfq
broadcom
bcm_phy_lib
mdio_bcm_unimac
dwc2
xhci_pci
genet
of_mdio
xhci_hcd
udc_core
crct10dif_ce
roles
crct10dif_common
reset_raspberrypi
sdhci_iproc
raspberrypi_cpufreq
usbcore
fixed_phy
sdhci_pltfm
usb_common
i2c_bcm2835
libphy
sdhci
fixed
gpio_regulator
phy_generic

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group 
default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group 
default qlen 1000
    link/ether dc:a6:32:bb:99:d9 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP 
group default qlen 1000
    link/ether dc:a6:32:bb:99:da brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.84/24 brd 192.168.1.255 scope global dynamic noprefixroute 
wlan0
       valid_lft 42785sec preferred_lft 42785sec
    inet6 2400:4050:2ba1:ac00:c5d7:4a4d:b3f9:a36f/64 scope global dynamic 
noprefixroute 
       valid_lft 14036sec preferred_lft 12236sec
    inet6 fe80::115b:96a0:c28:c09d/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    
packets errs drop fifo colls carrier compressed
    lo:  144140     517    0    0    0     0          0         0   144140     
517    0    0    0     0       0          0
  eth0:       0       0    0    0    0     0          0         0        0      
 0    0    0    0     0       0          0
 wlan0:  693907    1233    0    0    0     0          0        14   356162    
1212    0    0    0     0       0          0


** PCI devices:
00:00.0 PCI bridge [0604]: Broadcom Inc. and subsidiaries BCM2711 PCIe Bridge 
[14e4:2711] (rev 10) (prog-if 00 [Normal decode])
        Device tree node: 
/sys/firmware/devicetree/base/scb/pcie@7d500000/pci@1,0
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 50
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00000000-00000fff [size=4K]
        Memory behind bridge: f8000000-f80fffff [size=1M]
        Prefetchable memory behind bridge: [disabled]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [48] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [ac] Express (v2) Root Port (Slot-), MSI 00
                DevCap: MaxPayload 512 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- 
TransPend-
                LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit 
Latency L0s <1us, L1 <2us
                        ClockPM+ Surprise- LLActRep- BwNot+ ASPMOptComp+
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 5GT/s (ok), Width x1 (ok)
                        TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt+
                RootCap: CRSVisible+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ 
CRSVisible+
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- 
LTR+
                         10BitTagComp- 10BitTagReq- OBFF Via WAKE#, ExtFmt- 
EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- 
ARIFwd-
                         AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ 
OBFF Disabled, ARIFwd-
                         AtomicOpsCtl: ReqEn- EgressBlck-
                LnkCap2: Supported Link Speeds: 2.5-5GT/s, Crosslink- Retimer- 
2Retimers- DRS+
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- 
EqualizationPhase1-
                         EqualizationPhase2- EqualizationPhase3- 
LinkEqualizationRequest-
                         Retimer- 2Retimers- CrosslinkRes: unsupported, DRS-
                         DownstreamComp: Link Down - Not Determined
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
AdvNonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
AdvNonFatalErr+
                AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- 
ECRCChkCap- ECRCChkEn-
                        MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
                HeaderLog: 00000000 00000000 00000000 00000000
                RootCmd: CERptEn+ NFERptEn+ FERptEn+
                RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
                         FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
                ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
        Capabilities: [180 v1] Vendor Specific Information: ID=0000 Rev=0 
Len=028 <?>
        Capabilities: [240 v1] L1 PM Substates
                L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ 
L1_PM_Substates+
                          PortCommonModeRestoreTime=8us PortTPowerOnTime=10us
                L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
                           T_CommonMode=1us LTR1.2_Threshold=0ns
                L1SubCtl2: T_PwrOn=10us
        Kernel driver in use: pcieport

01:00.0 USB controller [0c03]: VIA Technologies, Inc. VL805 USB 3.0 Host 
Controller [1106:3483] (rev 01) (prog-if 30 [XHCI])
        Subsystem: VIA Technologies, Inc. VL805 USB 3.0 Host Controller 
[1106:3483]
        Device tree node: 
/sys/firmware/devicetree/base/scb/pcie@7d500000/pci@1,0/usb@1,0
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 51
        Region 0: Memory at 600000000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: [80] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot-,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] MSI: Enable+ Count=1/4 Maskable- 64bit+
                Address: 00000000fffffffc  Data: 6540
        Capabilities: [c4] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, 
L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- 
SlotPowerLimit 0.000W
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ 
TransPend-
                LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit 
Latency L0s <2us, L1 <16us
                        ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 5GT/s (ok), Width x1 (ok)
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Range B, TimeoutDis+ NROPrPrP- LTR-
                         10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- 
EETLPPrefix-
                         EmergencyPowerReduction Not Supported, 
EmergencyPowerReductionInit-
                         FRS- TPHComp- ExtTPHComp-
                         AtomicOpsCap: 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 
OBFF Disabled,
                         AtomicOpsCtl: ReqEn-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis+
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, 
EqualizationComplete- EqualizationPhase1-
                         EqualizationPhase2- EqualizationPhase3- 
LinkEqualizationRequest-
                         Retimer- 2Retimers- CrosslinkRes: unsupported
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
AdvNonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
AdvNonFatalErr+
                AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- 
ECRCChkCap- ECRCChkEn-
                        MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
                HeaderLog: 00000000 00000000 00000000 00000000
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci


** USB devices:
Bus 002 Device 002: ID 056e:6a13 Elecom Co., Ltd ESD-EMN
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 1a2c:4324 China Resource Semico Co., Ltd USB Keyboard
Bus 001 Device 003: ID 15ca:00c3 Textech International Ltd. Mini Optical Mouse
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: bullseye/sid
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: arm64 (aarch64)

Kernel: Linux 5.10.0-4-rt-arm64 (SMP w/4 CPU threads; PREEMPT)
Kernel taint flags: TAINT_CRAP
Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-5.10.0-4-rt-arm64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.139
ii  kmod                                    28-1
ii  linux-base                              4.6

Versions of packages linux-image-5.10.0-4-rt-arm64 recommends:
ii  apparmor             2.13.6-9
ii  firmware-linux-free  20200122-1

Versions of packages linux-image-5.10.0-4-rt-arm64 suggests:
pn  debian-kernel-handbook  <none>
pn  linux-doc-5.10          <none>

Versions of packages linux-image-5.10.0-4-rt-arm64 is related to:
ii  firmware-amd-graphics     20210208-3
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
hi  firmware-brcm80211        20201218-3
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
ii  firmware-linux-nonfree    20210208-3
ii  firmware-misc-nonfree     20210208-3
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

Reply via email to