tes 2 linked serial
ports).
--
Przemyslaw Kwiatkowski [Micha], mi...@micha.waw.pl, 2:480/127@FidoNet
SMS# +48 601 238089, GPG: 2CA0 F353 85FD B0F1 1BD4 73D7 F85D 2717
"Any technology distinguishable from magic is insufficiently advanced."
(c) Gregory Benford
--
To UNSUBSCRIBE, email to debia
accespoint possibly already has such bridge built-in. It
means, that you will create a loop. I am not sure what will happen then.
Some tests will be necessary. :-)
--
Przemyslaw Kwiatkowski [Micha], mi...@micha.waw.pl, 2:480/1...@fidonet
SMS# +48 601 238089, GPG: 2CA0 F353 85FD B0F1 1BD4 73D7 F85D 2717
"
doing that?
Start here:
http://wiki.debian.org/BridgeNetworkConnections
--
Przemyslaw Kwiatkowski [Micha], mi...@micha.waw.pl, 2:480/1...@fidonet
SMS# +48 601 238089, GPG: 2CA0 F353 85FD B0F1 1BD4 73D7 F85D 2717
"Any technology distinguishable from magic is insufficiently
way you may
have the same IP address (say 172.26.0.2) on both interfaces, and this
IP should be reachable whenever one of the interfaces is up.
--
Przemyslaw Kwiatkowski [Micha], mi...@micha.waw.pl, 2:480/1...@fidonet
SMS# +48 601 238089, GPG: 2CA0 F353 85FD B0F1 1BD4 73D7 F85D 2717
&qu
will work.
I will try to do some tests...
--
Przemyslaw Kwiatkowski [Micha], [EMAIL PROTECTED], 2:480/[EMAIL PROTECTED]
SMS# +48 601 238089, GPG: 2CA0 F353 85FD B0F1 1BD4 73D7 F85D 2717
"Any technology distinguishable from magic is insufficiently advanced."
(c) Gregory Benford
--
To
?
What do you think? Will the vga dongle work out-of-the box? I have
heart, that kernel supports the dongle on i686/amd64. Does it mean it
would work also on arm? (btw: I use arm, not armel).
Are necessary drivers compiled in debian arm kernel? If not, what
options should I switch on?
--
Przemyslaw
Lennert Buytenhek pisze:
>>> Do you have a serial console on it?
>> Yes. It shows only the raid and usblp messages, which you can see above.
>> After hang up the console does not work.
>
> Have you tried magic sysrq? (I.e. by sending a BREAK sequence.)
No - I did not think about that... Next ti
Lennert Buytenhek pisze:
md: data-check of RAID array md0
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 20
KB/sec) for data-check.
md: using 128k window, over a total of 14651136 blocks.
md: del
?
Nothing. The box simply stops to respond, power button does not work and
only solution is to disconnect power supply. It happens irregular -
sometimes twice a day, sometimes not within a week.
I noticed, that the box does NOT hang, when is it busy (when there are a
lot of disk operations perform
-check done.
RAID1 conf printout:
--- wd:2 rd:2
disk 0, wo:0, o:1, dev:sda3
disk 1, wo:0, o:1, dev:sdb3
drivers/usb/class/usblp.c: usblp0: removed
Any ideas?
--
Przemyslaw Kwiatkowski [Micha], [EMAIL PROTECTED], 2:480/[EMAIL PROTECTED]
SMS# +48 601 238089, GPG: 2CA0 F353 85FD B0F1 1BD4 73D7 F85D
Martin Guy wrote:
> 2008/1/16, Przemyslaw Kwiatkowski <[EMAIL PROTECTED]>:
>> I use lenny on my N2100 with standard kernel
>> (linux-image-2.6.22-3-iop32x) - works excellent! I have just rebuilt
>> kernel with make-kpkg (I used original 2.6.22-3-iop32x config and only
.
[...]
Any ideas?
--
Przemyslaw Kwiatkowski [Micha], [EMAIL PROTECTED], 2:480/[EMAIL PROTECTED]
SMS# +48 601 238089, GPG: 2CA0 F353 85FD B0F1 1BD4 73D7 F85D 2717
"Any technology distinguishable from magic is insufficiently advanced."
(c) Gregory Benford
--
To UNSUBSCRIBE, email to [EMAIL
m port is more stable, more coherent and more
> complete than any unstable one.
I forgot I have also cups server - and it is really very slow when I
print big files (ie hi-res photos). Does cups/foomatic/ghostscript use
floating point? If so, I could try to install them in armel chroot.
--
Hello,
>> Do you know if it's worth trying or is it too early?
>
> We now have over 90% of packages built and up to date. The main stuff that
> is missing is Fortran based packages some of which are held up by the
> ongoing transition to gFortran.
If I change arm to armel on my Thecus 2100, will
14 matches
Mail list logo
