Re: Cubox-i bullseye -> bookworm Upgrade failure

Hi, On 04-08-2023 08:55, Rainer Dorsch wrote: Hi, I did a test installation with a bullseye installer on a cubox-i and then upgraded to bookworm. After the upgrade the network was gone. Even booting with the previous kernel 5.10.0-23-armmp does not bring the network back. Any hints and ideas

Re: what is codium?

On 19-01-2023 11:36, gene heskett wrote: I see it being updated on my banana pi m5's, but it has no man page. Its apparently not an editor, so what is it? without knowing the details of the installed OS, etc. my first guess would be the open-source version of vscode aka vscodium Thanks.

Re: Any suggestions for a Debian(based/like) OS for the Orange Pi zero2

suggestions? did you try the link on the Orange Pi wiki? [1] [1] <http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-Pi-Zero-2.html> Thanks in advance! Rick GRTNX, RobJE

sun4i_codec kernel warnings due to missing card->owner

ich triggers kernel warnings when loading the module. All other 128 files with "stuct snd_soc_card" do also have "owner = THIS_MODULE". GRTNX, RobJE

Re: How to get Realtek RTL8723BS WiFi working with Debian Bullseye on Pine A64+?

Hi, On 12 February 2021 02:57:41 UTC, oreg...@disroot.org wrote: [SNIP] >Install, convoluted as it was, worked OK. Contrib and non-free were added to >/etc/apt/sources.list, despite the shame. firmware-realtek was installed to >get RTL8723BS firmware. > >Still no Wifi. Firmware is found: >

Re: help

open a shell and then look at > /var/log/syslog to see what's going on. How much RAM does the TS-221 have. When its 1GB this could be the cause of the issues. There is a known issue with devices that have more than 768M of RAM. See [1] [1] <https://lists.debian.org/debian-arm/2018/05/msg00028.html> GRTNX, RobJE

Re: "external abort on linefetch (0x814)" on Kirkwood 6282 SoC

(according to dmesg) HighMem starts. With no mem= (i.e. using the full 1024M) just booting already prints a lot of error messages for me. I think changes in handling HighMem between kirkwood and marvell flavours are the cause, though have no way other than the test above to confirm. Maybe information displayed in the error messages can help confirm issue is related to HighMem? When there is anything I can test please let me know. GRTNX, RobJE

Re: "external abort on linefetch (0x814)" on Kirkwood 6282 SoC

e 3x range on marvell and 8x range in kirkwood. - On marvell PCI bridges have additional capabilities: pciexpress and cap_list - usbhost:0 and usbhost:1 swapped between marvell and kirkwood. For reverence I also added the 6281 lshw output. lshw versions between devices are different. > Andrew G