Re: modprobe fuse fails after upgrade to Jessie 8.3 on Dreamplug (Kirkwood)

2016-02-16 Thread Tixy
On Tue, 2016-02-16 at 10:53 +, Ian Campbell wrote: > On Tue, 2016-02-16 at 08:11 +, Tixy wrote: > > On Tue, 2016-02-16 at 00:28 +0100, Martin Granehäll wrote: > > [...] > > > When I ran flash-kernel tool manually I saw that new uImage and > > > uInitrd files were generated, but not in /boot

Re: Re: modprobe fuse fails after upgrade to Jessie 8.3 on Dreamplug (Kirkwood)

2016-02-16 Thread Martin Granehäll
So, it all ends up with uncommenting these two lines in /etc/flash-kernel/db. Amazing. #Machine: Globalscale Technologies Dreamplug #Boot-Device: /dev/sdb1 Thanks a lot everyone! -Martin

Re: modprobe fuse fails after upgrade to Jessie 8.3 on Dreamplug (Kirkwood)

2016-02-16 Thread Ian Campbell
On Tue, 2016-02-16 at 08:11 +, Tixy wrote: > On Tue, 2016-02-16 at 00:28 +0100, Martin Granehäll wrote: > [...] > > When I ran flash-kernel tool manually I saw that new uImage and > > uInitrd files were generated, but not in /boot. It says > > "using /dev/sda1 as boot device", but that is and i

Re: modprobe fuse fails after upgrade to Jessie 8.3 on Dreamplug (Kirkwood)

2016-02-16 Thread Tixy
On Tue, 2016-02-16 at 00:28 +0100, Martin Granehäll wrote: [...] > When I ran flash-kernel tool manually I saw that new uImage and > uInitrd files were generated, but not in /boot. It says > "using /dev/sda1 as boot device", but that is and internal sd card, > not used. I have the same setup and s

Re: modprobe fuse fails after upgrade to Jessie 8.3 on Dreamplug (Kirkwood)

2016-02-15 Thread Uwe Kleine-König
Hello Martin, On 02/16/2016 12:28 AM, Martin Granehäll wrote: > Thanks a lot for helping me out here. > I have managed to solve it, or at least found a workaround. > > The system uses u-boot, and picks uImage and uInitrd from an external sd > card at boot time. So either change U-Boot to boot fr

Re: modprobe fuse fails after upgrade to Jessie 8.3 on Dreamplug (Kirkwood)

2016-02-15 Thread Martin Granehäll
Thanks a lot for helping me out here. I have managed to solve it, or at least found a workaround. The system uses u-boot, and picks uImage and uInitrd from an external sd card at boot time. When I ran flash-kernel tool manually I saw that new uImage and uInitrd files were generated, but not in /

Re: modprobe fuse fails after upgrade to Jessie 8.3 on Dreamplug (Kirkwood)

2016-02-15 Thread Uwe Kleine-König
Hallo, On 02/15/2016 01:29 PM, Martin Granehäll wrote: > _sources.list:_ > # deb http://ftp.se.debian.org/debian/ jessie main > deb http://ftp.se.debian.org/debian/ jessie main non-free contrib > deb-src http://ftp.se.debian.org/debian/ jessie main non-free contrib > deb http://security.debian.org

Re: modprobe fuse fails after upgrade to Jessie 8.3 on Dreamplug (Kirkwood)

2016-02-15 Thread Martin Granehäll
​​Hello. *sources.list:* # deb http://ftp.se.debian.org/debian/ jessie main deb http://ftp.se.debian.org/debian/ jessie main non-free contrib deb-src http://ftp.se.debian.org/debian/ jessie main non-free contrib deb http://security.debian.org/ jessie/updates main contrib non-free deb-src http://se

Re: modprobe fuse fails after upgrade to Jessie 8.3 on Dreamplug (Kirkwood)

2016-02-15 Thread Uwe Kleine-König
Hello Martin, On 02/15/2016 10:33 AM, Martin Granehäll wrote: > Thanks. Yes, I rebooted. that means that you rebooted and are still unable to load the fuse module? > But this indicates I somehow didn't get the latest kernel update after all? What is in your apt sources.list? What is the output

Re: modprobe fuse fails after upgrade to Jessie 8.3 on Dreamplug (Kirkwood)

2016-02-15 Thread Martin Granehäll
Thanks. Yes, I rebooted. But this indicates I somehow didn't get the latest kernel update after all? -Martin 2016-02-15 10:05 GMT+01:00 Uwe Kleine-König : > Hello Martin, > > On 02/15/2016 12:53 AM, Martin Granehäll wrote: > > I have used fuse successfully on the Dreamplug with Jessie 8.2 but a

Re: modprobe fuse fails after upgrade to Jessie 8.3 on Dreamplug (Kirkwood)

2016-02-15 Thread Uwe Kleine-König
Hello Martin, On 02/15/2016 12:53 AM, Martin Granehäll wrote: > I have used fuse successfully on the Dreamplug with Jessie 8.2 but after > last update to 8.3, the kernel module doesn't load. > Does latest version of fuse depend on later kernel, or could something > be wrong with my installed kerne