Quoting Qin Bo (kinbos...@gmail.com):
hi all:
I use squeeze Nov 6 build iso to install, i had three network
interface card, a onboard NIC and two stand alone NIC is intel e1000,
and e1000 1st(eth1) is plug a cable, e1000 2nd(eth2) and
onboard(eth0) is not, i want to auto
2010/12/10 Christian PERRIER bubu...@debian.org
Quoting Qin Bo (kinbos...@gmail.com):
hi all:
I use squeeze Nov 6 build iso to install, i had three network
interface card, a onboard NIC and two stand alone NIC is intel e1000,
and e1000 1st(eth1) is plug a cable, e1000
Package: installation-reports
Installing Debian 6 beta2 i386 I found quite strange behavior of disk
partitioner during install.
Typing the label for new partition I accidentally put backslash at the end of
the label name. It exactly looked like: SYS\.
After that I wasn't able to edit this
Accepted:
ata-modules-2.6.32-5-iop32x-di_1.53_armel.udeb
to
main/l/linux-kernel-di-armel-2.6/ata-modules-2.6.32-5-iop32x-di_1.53_armel.udeb
ata-modules-2.6.32-5-ixp4xx-di_1.53_armel.udeb
to
main/l/linux-kernel-di-armel-2.6/ata-modules-2.6.32-5-ixp4xx-di_1.53_armel.udeb
Accepted:
ata-modules-2.6.32-5-iop32x-di_1.54_armel.udeb
to
main/l/linux-kernel-di-armel-2.6/ata-modules-2.6.32-5-iop32x-di_1.54_armel.udeb
beeper-modules-2.6.32-5-ixp4xx-di_1.54_armel.udeb
to
main/l/linux-kernel-di-armel-2.6/beeper-modules-2.6.32-5-ixp4xx-di_1.54_armel.udeb
There are disparities between your recently accepted upload and the
override file for the following file(s):
ext4-modules-2.6.32-5-ixp4xx-di_1.54_armel.udeb: package says priority is
extra, override says standard.
Please note that a list of new sections were recently added to the
archive:
Source: mklibs
Version: 0.1.30
Severity: important
Tags: patch
This was originally found on armhf (a new port on debian-ports.org), when
doing d-i work, but was also reproduced on amd64 and Ubuntu armel -which
I guess uses the same source.
You can easily check it by doing:
$ mklibs-readelf -n
Oh, I seem to have forgotten one debug line, please remove the following line:
std::cout process_dynamics: section = std::hex section \n;
Thanks
Konstantinos
--
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact
Package: netcfg
Version: 1.46
The value specified using netcfg/get_hostname seems to be ignored, if a
reverse DNS entry is present for the IP-address of the server being installed.
Seems to be a bit similar to this bug: http://bugs.debian.org/cgi-
bin/bugreport.cgi?bug=544513 (dhcp returned
Followup email:
It appears that the same segfault appeared with two other command line
options, --print-symbols-provided and --print-symbols-undefined (on the
same file, /sbin/ldconfig.real. I attach
the complete patch (tested to work properly throughout the whole d-i image
build process).
Package: busybox-udeb
Version: 1.10.2-2
I think the arping applet should be enabled in the Busybox build.
It helps a great deal in debugging general network issues and could be helpful
to create a solution for some other bugs like:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=537271
On Fri, Dec 10, 2010 at 05:45:30PM +0800, Qin Bo wrote:
Dec 10 10:49:14 netcfg[3916]: INFO: eth0 is disconnected. (MII)
Dec 10 10:49:14 netcfg[3916]: INFO: eth0 is not a wireless interface.
Continuing.
Dec 10 10:49:14 netcfg[3916]: INFO: eth1 is disconnected. (MII)
Dec 10 10:49:14
Floris Bos b...@je-eigen-domein.nl writes:
I think the arping applet should be enabled in the Busybox build.
It helps a great deal in debugging general network issues and could be
helpful to create a solution for some other bugs like:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=537271
Floris Bos b...@je-eigen-domein.nl writes:
The value specified using netcfg/get_hostname seems to be ignored, if a
reverse DNS entry is present for the IP-address of the server being installed.
[...]
I think netcfg/get_hostname should take precendence over everything else.
Half of the
Processing commands for cont...@bugs.debian.org:
retitle 603960 squeeze beta1: isolinux freezes
Bug #603960 [installation-reports] Debian Installer 6.0 Beta1 bug report
Changed Bug title to 'squeeze beta1: isolinux freezes' from 'Debian Installer
6.0 Beta1 bug report'
merge 603960 604245
Hi,
On Friday, December 10, 2010 05:12:39 pm Ferenc Wagner wrote:
Floris Bos b...@je-eigen-domein.nl writes:
I think the arping applet should be enabled in the Busybox build.
It helps a great deal in debugging general network issues and could be
helpful to create a solution for some other
lsore...@csclub.uwaterloo.ca (Lennart Sorensen) writes:
On Fri, Dec 10, 2010 at 05:45:30PM +0800, Qin Bo wrote:
Dec 10 10:49:14 netcfg[3916]: INFO: eth0 is disconnected. (MII)
Dec 10 10:49:14 netcfg[3916]: INFO: eth0 is not a wireless interface.
Continuing.
Dec 10 10:49:14 netcfg[3916]:
reassign 606610 parted
thanks
Quoting michal talecki (michal.tale...@gmail.com):
Package: installation-reports
Installing Debian 6 beta2 i386 I found quite strange behavior of disk
partitioner during install.
Typing the label for new partition I accidentally put backslash at the end of
Processing commands for cont...@bugs.debian.org:
reassign 606610 parted
Bug #606610 [installation-reports] disk partitioner - backslash in label name
problem
Bug reassigned from package 'installation-reports' to 'parted'.
thanks
Stopping processing here.
Please contact me if you need
Floris Bos b...@je-eigen-domein.nl writes:
On Friday, December 10, 2010 05:12:39 pm Ferenc Wagner wrote:
Floris Bos b...@je-eigen-domein.nl writes:
I think the arping applet should be enabled in the Busybox build.
It helps a great deal in debugging general network issues and could be
Hi,
On Friday, December 10, 2010 05:17:15 pm Ferenc Wagner wrote:
Floris Bos b...@je-eigen-domein.nl writes:
The value specified using netcfg/get_hostname seems to be ignored, if a
reverse DNS entry is present for the IP-address of the server being
installed. [...]
I think
Floris Bos b...@je-eigen-domein.nl writes:
On Friday, December 10, 2010 05:17:15 pm Ferenc Wagner wrote:
Floris Bos b...@je-eigen-domein.nl writes:
The value specified using netcfg/get_hostname seems to be ignored, if a
reverse DNS entry is present for the IP-address of the server being
We believe that the bug you reported is now fixed; the following
changes were made to the overrides...
Concerning package ext4-modules-2.6.32-5-ixp4xx-di...
Operating on the unstable suite
Changed priority from standard to extra
Thank you for reporting the bug, which will now be closed. If you
On 12/09/2010 10:27 AM, Gaudenz Steinlin wrote:
I sponsored an uploaded of yaboot to testing-proposed-updates with the
following changes to fix RC bugs:
yaboot (1.3.13a-1squeeze1) testing-proposed-updates; urgency=low
.
* Team upload.
* Get scsi, sata, and firewire drive info
On Fri, Dec 10, 2010 at 10:52:34PM +0100, Mehdi Dogguy wrote:
On 12/09/2010 10:27 AM, Gaudenz Steinlin wrote:
I sponsored an uploaded of yaboot to testing-proposed-updates with the
following changes to fix RC bugs:
yaboot (1.3.13a-1squeeze1) testing-proposed-updates; urgency=low
.
Defenda-se do ataque diário de substâncias perigosas com EVERBEAUTY Vacin
Formula
Agora você pode combater a causa de uma enorme gama de problemas que geram
doenças, envelhecem seu corpo e tiram sua alegria de viver.
Desfrute dos efeitos regeneradores do Ácido Alfa-lipóico, do Levedo de
On Friday, December 10, 2010 09:53:42 pm Ferenc Wagner wrote:
Not everyone has the power to change their own reverse DNS entries, or it
might take time to process (send a request to the upstream provider that
is responsible for the IP block, wait for them to process it, and reload
the
This bug also occurs when using the amd64 iso image
(http://cdimage.debian.org/cdimage/squeeze_di_beta2/amd64/iso-cd/debian-squeeze-di-beta2-amd64-netinst.iso),
downloaded 2010-12-10. Exactly the same behavior is exhibited: I get
to the splash screen, and hit Enter. Then it reads from the CD
On 12/10/2010 11:07 PM, Lennart Sorensen wrote:
Of course if the new version currently in unstable that many people
have asked for for years was used instead, a huge number of newer
powerpc machines might actually work with Debian. 1.3.13a is simply
useless for most modern powerpc
On Fri, Dec 10, 2010 at 09:53:42PM +0100, Ferenc Wagner wrote:
Floris Bos b...@je-eigen-domein.nl writes:
Not everyone has the power to change their own reverse DNS entries, or it
might take time to process (send a request to the upstream provider that is
responsible for the IP block,
On Fri, Dec 10, 2010 at 11:42:49PM +0100, Mehdi Dogguy wrote:
Well, Gaudenz and Milan worked on fixing the reported RC bugs against
yaboot. And, I'd rather thank them for that. sid's version doesn't look
like fixing the critical problems experienced by our users. Besides, I
don't see any
Package: installation-reports
Severity: wishlist
Installation in graphical expert mode
No problem
But the install process went in qwerty until the final step
I had selected French from the initial step but i had to type in qwerty mode
till the final
Good work anyway as the install went very fine
Debian installer build overview
---
Failed or old builds:
* OLD BUILD:hppa Jun 07 00:12 bui...@lafayette build_cdrom
http://d-i.debian.org/daily-images/hppa/daily/build_cdrom.log
* OLD BUILD:hppa Jun 07 00:16 bui...@lafayette build_netboot
On 12/10/2010 06:21 PM, Lennart Sorensen wrote:
On Fri, Dec 10, 2010 at 11:42:49PM +0100, Mehdi Dogguy wrote:
Well, Gaudenz and Milan worked on fixing the reported RC bugs against
yaboot. And, I'd rather thank them for that. sid's version doesn't look
like fixing the critical problems
forcemerge 343269 606636
thanks
Quoting Floris Bos (b...@je-eigen-domein.nl):
Guess it wasn't good enough 5 years ago either. :-)
Seems my bug is a duplicate of:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=343269
Correct. Apparently, though, that behaviour didn't bother anybody
enough
Processing commands for cont...@bugs.debian.org:
forcemerge 343269 606636
Bug#343269: hostname/domain name preseeding is quite broken
Bug#606636: Reverse DNS takes precedence over netcfg/get_hostname
Forcibly Merged 343269 606636.
thanks
Stopping processing here.
Please contact me if you need
Quoting andre (altux...@gmail.com):
Package: installation-reports
Severity: wishlist
Installation in graphical expert mode
No problem
But the install process went in qwerty until the final step
I had selected French from the initial step but i had to type in qwerty mode
till the final
Quoting Christian PERRIER (bubu...@debian.org):
Quoting andre (altux...@gmail.com):
Package: installation-reports
Severity: wishlist
Installation in graphical expert mode
No problem
But the install process went in qwerty until the final step
I had selected French from the initial
38 matches
Mail list logo
