On Fri, Oct 07, 2016 at 01:44:13AM +0200, Jean-Christian de Rivaz wrote:
> Did you realize that SD card and eMMC uses both exactly the same signaling
> and controller on all processors, not only on the Allwinner family ? If a
> board designer is stupid enough to connect the eMMC instead of the SD c
On Thu, Oct 06, 2016 at 11:28:07PM +0100, Ben Hutchings wrote:
> Is that actually controlled by straps, though? For the TI SoC I've
> been working with recently, when the boot device is set to eMMC the ROM
> code will look for the SPL in:
>
> 1. boot area
> 2. fixed offsets in main area
> 3. file
Le 07. 10. 16 à 03:18, Ben Hutchings a écrit :
On Fri, 2016-10-07 at 01:44 +0200, Jean-Christian de Rivaz wrote:
Did you realize that SD card and eMMC uses both exactly the same
signaling and controller on all processors, not only on the Allwinner
family ?
This is not true. There are many sign
Le 07. 10. 16 à 01:57, Jean-Christian de Rivaz a écrit :
Le 07. 10. 16 à 00:39, Karsten Merker a écrit :
was wrote by the installer.
The debian-installer doesn't install u-boot, but it takes
explicit care not to destroy an existing u-boot installation
during the partitioning step.
Yes. It take
On Fri, 2016-10-07 at 01:44 +0200, Jean-Christian de Rivaz wrote:
> Le 07. 10. 16 à 00:30, Karsten Merker a écrit :
>
> > So the boot order might not be problematic on the Orange Pi Plus, but
> > it can definitely be problematic on A64-based systems and it might
> > possibly be problematic on othe
Le 07. 10. 16 à 00:39, Karsten Merker a écrit :
On Thu, Oct 06, 2016 at 08:13:45PM +0200, Jean-Christian de Rivaz wrote:
Right. For my curiosity I tested the netboot SD card image of
the Debian installer and tried to tell it to partition, format
and install Debian into the very same SD card the
Le 07. 10. 16 à 00:30, Karsten Merker a écrit :
So the boot order might not be problematic on the Orange Pi Plus, but
it can definitely be problematic on A64-based systems and it might
possibly be problematic on other H3-based boards.
Did you realize that SD card and eMMC uses both exactly the
On Thu, 2016-10-06 at 16:53 -0400, Lennart Sorensen wrote:
> On Thu, Oct 06, 2016 at 12:29:13PM -0700, Vagrant Cascadian wrote:
> > To make matters more complicated, there are definitely some boards
> > (Firefly, maybe BeagleBoard-X15) which can install the OS to eMMC,
> > but
> > u-boot still has
Le 06. 10. 16 à 21:29, Vagrant Cascadian a écrit :
I don't believe there is any code in debian-installer to install u-boot;
the installer did not install it. I don't believe there is any code
within all of Debian to install u-boot automatically (unless you count
SD image generation). It is at thi
On Thu, Oct 06, 2016 at 12:29:13PM -0700, Vagrant Cascadian wrote:
> To make matters more complicated, there are definitely some boards
> (Firefly, maybe BeagleBoard-X15) which can install the OS to eMMC, but
> u-boot still has to be loaded from SD card. I don't think we have much
> information on
Thanks Karsten and Jean-Christian for your detailed responses! It's a
complicated issue, more details below...
On 2016-10-06, Jean-Christian de Rivaz
wrote:
> Le 06. 10. 16 à 15:26, Karsten Merker a écrit :
> Right. For my curiosity I tested the netboot SD card image of the Debian
> installer an
Le 06. 10. 16 à 15:26, Karsten Merker a écrit :
The raw MLC NAND flash that was commonly used as fixed storage on
sunxi-based boards isn't yet properly supported in the mainline
kernel and sunxi-based systems with eMMC storage are a fairly
recent development. Therefore until recently, on sunxi-b
On Thu, Oct 06, 2016 at 07:45:36AM +, Jonathan Quick wrote:
> Package: installation-reports
> Version: 2.58
> Severity: important
>
> Dear Maintainer,
>
> Whilst installing from a (Jessie) 8.6 netboot installer the GRUB installation
> step failed, leaving the system unbootable.
>
> -- Packa
equipos para la venta
en transmaquina estamos constantemente evolucionando buscando nuevas formas de
prestarles servicios a nuestros clientes, es por esto que queremos presentarles
nuestra división de venta de equipos.
actualmente contamos a la fecha con una cartera importante de equipos
dispo
On Thu, Oct 06, 2016 at 11:40:58AM +0200, Jean-Christian de Rivaz wrote:
> The U-Boot and the installer was on a SD card that was only created by
> decompressing and concatenating this two files:
> https://d-i.debian.org/daily-images/armhf/daily/netboot/SD-card-images/firmware.orangepi_plus.img.gz
On Wed, Oct 05, 2016 at 10:09:30AM +0200, Uwe Kleine-König wrote:
> Hello again,
>
> On Wed, Oct 05, 2016 at 09:15:05AM +0200, Uwe Kleine-König wrote:
> > when booting the installer kernel + initramfs the kernel just hangs
> > after some time. Below is the complete boot log. After the last line th
Le 06. 10. 16 à 02:16, Karsten Merker a écrit :
On Wed, Oct 05, 2016 at 10:59:06PM +0200, Jean-Christian de Rivaz wrote:
First I wish to congratulate the Debian Installer team for
there fantastic work on armhf. I tested both the hd-media and
netinst on a Allwinner H3 Orange Pi Plus and the ins
Processing commands for cont...@bugs.debian.org:
> tags 839608 + sid stretch
Bug #839608 [python-application] python-application: keep out of stretch for now
Added tag(s) stretch and sid.
> tags 838944 + sid
Bug #838944 [vimhelp-de] vimhelp-de: depends on vim 7.4 but unstable has vim 8.0
Added tag
18 matches
Mail list logo
